Minisport

Body Seals and rubber

 

Pricing:
Sort by:
None...

Mini stainless steel aerial hole plug- sold single - 8B12396B

8B12396B- HOLE PLUG (20mm) IN STAINLESS STEEL

Stainless steel plug with nut fittings so they seal properly and cannot be stolen will cover hole of around 20mm- can be used for an aray of uses, like sealing firewall where a rubber grommet will just not do. If cleaned regularly they will stay smart and bright for a lifetime. Sold individually

$6.32
($4.89 USD †) In stock

Mini heater or choke cable grommet 1/2" wide - CAM5969

CAM5969- GROMMET FOR HEATER or CHOKE CABLE

the factory fitted 1/2"wide grommet for the choke and heater cable for 11/32"hole.
$4.50
($3.49 USD †) In stock

Mini boot lid wiring grommet - RFN303

RFN303- WIRING GROMMET FOR BULKHEAD AND BOOTLID ORIGINAL TYPE

General looking sort of plug this is predominantly for protecting the wires where the go through the metal of the boot lid and some bulk head applications
( USD †) In stock

Fire wall grommet, 3/4" hole with 1/8" centre - 14A7033

14A7033- Grommet for firewall etc 

1/8" centre hole for wires the plug fits 3/4"hole

$2.27
($1.76 USD †) In stock

Mini heater hose grommet (fits on firewall for heater hose) - 34G3651

34G3651- HEATER HOSE GROMMET FOR BODY

This is the specially made grommet which fits into the body to allow the 1/2" heater hose to go through the body on the right hand side of the bulk head panel.
$3.18
($2.46 USD †) In stock

Mini remote gearchange plug, (stops water from entering gearchange)- 22A285 - 22A285

22A285- REMOTE CONTROL EXTENSION 1/2 MOON PLUG

Fitted in the gearbox remote control this half moon seal butted up against the gearbox remote housing.
$13.59
($10.53 USD †) In stock

Mini 1" grommet with 7/32" hole - 5L23

5L23- GROMMET WIRING LOOM 1"HOLE for oil temp gauges

Large grommet to fit 1"approx holes in bulkhead for items that need to be able to flex and move such as capillary tubes and oil pipes.7/32" hole size
$2.68
($2.08 USD †) In stock

Mini rear subframe grease nipple/floor 1" plug (sold single) - 14A7081

14A7081- PLUG BOOT FLOOR / RADIUS ARM SHROUD

 

Special shape and strength 1" rubber floor plug. This plug goes on the rear trailing arm grease points and in any 1inch hole in your car floor.
$6.32
($4.89 USD †) In stock

Mini Clubman outer door lock retaining clips (X1)*SOLD SINGLE* - AHA7408/37H3387

AHA7408- Clubman outer door lock retaining clip

This Clip goes around the body of the clubman outer door lock, the clip keeps tension on the inside of the door and the door lock. When replacing this we also suggest replacing the sealing gasket on the outside of the door lock. **New supplier means an all new low price**
$6.32
($4.89 USD †) In stock

Mini clubman outer door lock sealing rubber (thin/small type) *SOLD SINGLE* - 37H8234

37H8234- Mini clubman outer door lock sealing rubber (thin/small type)

Mini clubman outer door lock sealing rubber (thin/small type). This is the seal inbetween the outer leyland door lock and the door skin/paint. This seal is a MUST and (as per the picture) the perfect size. if your door key lock area has been repaired (rewelding the flat tabs) then you will need the oversized 255/003 to cover any repair work.
$4.50
($3.49 USD †) In stock

Mini oversize clubman outer door lock sealing rubber *AUSTRALIAN MADE* - 255/003

255/003- Clubman outer door lock seal (X1)

This goes in between the body of the clubman outer door lock and the door, the seal keeps the water out of your door locks aswell as adding extra tension onto the retaining clip. When replacing this we also suggest replacing the retaining clip.
$11.77
($9.12 USD †) In stock

Morris mini windup window outer door handle gasket (X1) - HYA2780

HYA2780- Morris mini door handle gasket

This gasket goes in between the morris outer door handle and the painted body of your car. They are a must to prevent water from destroying your locks and doors (water damage and rust)
$12.68
($9.82 USD †) In stock

Morris mini outer door handle rubber rest/stopper - HYA3487

HYA3487- Morris mini rubber outer door handle rest/stopper (X1)

This rubber block is what your outer door handle rests on when your doors are closed, the rest is one of the unique parts of a mini. If your outer handle is not resting on the stop you may have a broken door snail spring.
$18.14
($14.05 USD †) In stock

Mini boot handle gasket/rubber seal (now made in Aust) - 14A8429

14A8429- Mini boot handle rubber seal

The rubber stops the rain from getting into your boot handle, This rubber seal is 10 times better than the English gaskets and really will work. (Also fitted to van rear doors)
$15.41
($11.94 USD †) In stock

Mini leyland side light/indicator assembly gasket (lens to base) - 37H4190

37H4190- Mini leyland side light/indicator assembly gasket (lens to base)

Mini leyland side light/indicator assembly gasket (lens to base).
$6.32
($4.89 USD †) In stock