Minisport

Disc brake parts

Pricing:
Sort by:

Mini metro turbo, cross drilled/slotted and vented rotors PAIR - C-GBD496

C-GBD496- METRO BRAKE DISC PAIR SLOT & HOLE/VENTED 8.4"

These are for 8.4" wide vented discs as originally used on metros but very common on modified minis. These are grooved and drilled to help keep cool and keep brake pad wear true.

Sold only in pairs as recommended by manufacturers and brake companies.

$259.09
($192.90 USD ) In stock

Mini brake caliper bolt- 4 REQ - 53K1048

53K1048- BRAKE CALIPER RETAINING HT BOLT 1.5/16"LONG

High tensile 3/8" bolt 1.3125"long to hold the standard calipers to the hub on disc brake models.

$3.14
($2.34 USD ) In stock

MINI COOPER (7" TYPE) BRAKE CALIPER PISTON (STAINLESS STEEL) 997/998 (1.618 DIA) - 17H7913

17H7913- Mini cooper (7" type) brake caliper piston (Stainless steel) 997/998 (1.618 DIA)

On the early mini cooper they had 7" disc brakes fitted (unlike the 7.5" cooper S brake) This is a replacement (Stainless steel) brake caliper piston to suit both the 997 & the 998 cooper brakes. The piston is 1.618" of an inch diameter.

$36.32
($27.04 USD ) In stock

MINI COOPER 'S'/GT (7.5" TYPE) DISC BRAKE CALIPER PISTON- 1.75" DIA - SAAS501/1030044

SAAS501/1030044- MINI COOPER 'S'/GT (7.5" TYPE) DISC BRAKE CALIPER PISTON- 1.75" DIA

Stainless steel "S" caliper piston for calipers that take 7.5"wide brake disc as used on all Cooper "S"variants and early 1275GT. These are correctly ground for long life and fitment against the seals,but nore importantly have the raised crown section on the area to allow the fluid to correctly push the piston out, beware of the many copies out there that are not correct. Made in stainless steel to reduce heat transfer to caliper fluid and for longevity.

$22.68
($16.89 USD ) In stock

MINI (8.4" TYPE) CALIPER PISTON- 2" DIA - 114713/1030051

1030051- 8.4 caliper piston, sold single (2 per caliper)

Pistons in your calipers can rust and score, if they need replacing then you do all 4, to stop any brake pull etc from over active calipers, as fitted to ROVER/LS/MOKE/MORRIS 1100

$20.91
($15.57 USD ) In stock

MINI CALIPER PISTON, (4 POT) STAINLESS STEEL INC METRO - SAAS1022

SAAS1022- CALIPER PISTON 4 POT S/STEEL INC METRO

This stainless steel caliper piston fits all Minispares 4 pot calipers plus Metro and ERA turbo 4 pot calipers

$27.23
($20.27 USD ) In stock

Mini cooper (NOT S) caliper seal kit for 7" cooper calipers (sold per single caliper) - 8G8587

GRK5009/8G8587- CALIPER SEAL REPAIR KIT 997/8 COOPER GENUINE

Genuine AP lockheed seal Rebuild kit for Cooper 997/998cc brake calipers. When it comes to safety critical parts only fit the original suppliers parts as repair kits.The kit includes all the seals needed to do both pistons in one caliper.

$15.41
($11.47 USD ) In stock

Mini cooper 'S' 7.5 disc brake caliper seal overhaul kit (1 side) - GRK5006

GRK5006- Cooper S disc brake caliper seal overhaul kit

This kit will overhaul the cooper S 7.5 disc brake calipers, you get the main seals/dust seals and dust rings you will need two of these to do a complete overhaul on both your calipers.

$18.14
($13.50 USD ) In stock

Mini 8.4 caliper seal kit (1 kit does 1 caliper) - GRK5008

50961/GRK5008- 8.4" caliper seal kit as fitted to ROVER/LS/MORRIS 1100/MOKE

This is all the seals required to do 1 caliper, you will need 2 of these kits to do a complete overhaul on both calipers as fitted to ROVER/LS/MOKE/MORRIS 1100

$20.00
($14.89 USD ) In stock

Mini metro turbo brake caliper seal overhaul kit (4 piston type, does 1 caliper) - GRK5003

GRK5003- MINI METRO BRAKE CALIPER SEAL OVERHAUL KIT (1 CALIPER PER KIT)

This kit does the 4 pot type mini metro brake caliper, this is the main seals/dust seal and dust rings. The bridge seal is not avaiable new and you will have to reuse your old one. This kit does 1 brake caliper.

$31.77
($23.66 USD ) In stock

Mini 7.5 caliper bridge seal (1 per caliper) - 17H8764

17H8764- Mini cooper S caliper bridge seal

This seal goes in between the caliper halves; it allows the brake fluid to transfer between pistons. A must for any caliper overhaul.

$10.00
($7.45 USD ) In stock

Mini 8.4" caliper bridge seal (1 required per caliper) - RTC1137

RTC1137- 8.4" caliper bridge seal

Caliper bridge seal, that joins the 2 halves together, 1 required per caliper as fitted to ROVER/LS/MOKE/MORRIS 1100

$5.45
($4.06 USD ) In stock

Mini 7.5 original cooper S brake shields and tangs - 21A1271/72/73/74

21A1271/72/73/74 + BTA1208/09 Mini 7.5 disc brake water sheilds

Cooper S disc brake water shields are easily damaged and hence frequently missing altogether. This is a complete kit and consists of six different components: upper and lower shields plus mounting tabs for each side.

$90.91
($67.68 USD ) In stock

BOOT CABLE COVER / FRONT DISC / RADIUS ARM SHROUD SCREW/ SCREW FOR BOOT LID WIRES - SE910161

SE910161- BOOT CABLE COVER / FRONT DISC / RADIUS ARM SHROUD SCREW/ SCREW FOR BOOT LID WIRES

This screw is used to hold together the 2 halves of the disc shields on all mini front discs. Also used to retain the boot lid cable to the bootlid.

$0.91
($0.68 USD ) In stock

8.4" BRAKE DISC COVERS -R/H - MSSK1402

MSSK1402- 8.4" BRAKE DISC COVERS & SHIELD TANGS -R/H

Non genuine pair of R/H disc shield covers for the 8.4" disc size fitted as standard from 1984 to 2000. Non genuine but all that is available, it comes complete with the little locating bracket. If you require just the bracket order it separately as BTA1208

$63.59
($47.34 USD ) In stock