Minisport

Gaskets and seals

Pricing:
Sort by:

Mini 1275 BK450 VRS set, ulitmate headgasket VRS - AJM1140BK450

AJM1140BK450- Mini BK450 1275 VRS kit

This is one of the best head gaskets now in a VRS kit, comes as shown- to suit '1275'

$45.41
($33.86 USD ) In stock

MINI & MOKE HEAD GASKET SET WITH GEG300 COPPER HEAD GASKET 1275cc - AJM1141MS

AJM1141MS- MINI & MOKE HEAD GASKET SET WITH GEG300 COPPER HEAD GASKET 1275cc

Same contents as AJM1140MS but with the super GEG300 performance Copper type head gasket substituted for the standard copper type.

$45.41
($33.86 USD ) In stock

Mini 1275 complete engine gasket set (copper head gasket) - AJM202+AJM1140+13H2934

BIG_GASK_KIT- Mini big bore complete gasket set

This is every gasket you will need to rebuild your big bore (1275) engine AS SHOWN

$72.68
($54.20 USD ) In stock

Mini supplimentry gasket set (engine to gearbox with soft 1/2 moon)- HYL3616# - HYL3616#

HYL3616# Mini supplimentry gasket set

Gasket set with required gaskets to replace the gearbox onto the engine. (suits all models)- 1/2 moon no steel insert

$25.00
($18.64 USD ) In stock

MINI & MOKE BLOCK GASKET SET SMALL BORE PLUS COOPER S - AJM202MS

AJM202MS- MINI & MOKE BLOCK GASKET SET SMALL BORE PLUS COOPER S (NO CLUTCH SEAL)

Universal gasket set This engine block gasket set fits all manual blocks with tappet chest covers including A plus timing gear gaskets. for the gasket set less tappet chest seals see AJM206MS. does not normally include clutch seal.

$40.00
($29.83 USD ) In stock

MINI & MOKE BLOCK GASKET SET ALL 1300 EXCEPT S - AJM206MS

AJM206MS- MINI & MOKE BLOCK GASKET SET ALL 1300 EXCEPT S (NO CLUTCH OIL SEAL)

Universal gasket set for solid wall blocks. For any manual block, includes gaskets for "A" Plus and pre A Plus timing covers, but is less tappet chest cover gaskets. Does not include clutch oil seal.

$40.00
($29.83 USD ) In stock

MINI & MOKE GENUINE ENGINE BLOCK GASKET SET (NO OIL SEAL) - GUG701614CS

GUG701614CS- MINI & MOKE GENUINE ENGINE BLOCK GASKET SET (NO OIL SEAL)

Genuine block gasket set which does not include clutch oil seal.

$53.64
($39.99 USD ) In stock

MINI & MOKE GEARBOX TO BLOCK GASKET SET- 3&4 SYNC- NON GENUINE - GUG703038SG

GUG703038SG- Mini engine to gearbox gaskets

The gasket with the oil suction seal hole fits every gearbox and the other two are for the different case shapes on 3 and 4 synchro gearboxes. 3 gaskets in a kit 

$8.14
($6.07 USD ) In stock

Mini clutch housing/bell housing gasket- non-genuine - 22A2237B

22A2237B- Mini clutch housing/bell housing gasket.

This is the main gasket that joins the clutch housing onto the engine/gearbox. (NON GENUINE TYPE)

$12.68
($9.46 USD ) In stock

Mini clutch housing/bell housing gasket- Genuine - GUG705563GM

GUG705563GM- Mini clutch housing/bell housing gasket

This is the main gasket that joins the clutch housing onto the engine/gearbox.

$20.00
($14.91 USD ) In stock

MINI & MOKE 'SOFT' ENGINE TO GEARBOX HALF MOON SEAL - AHU1959

AHU1959- Mini engine to gearbox '1/2 moon seal'

This seal goes between the engine to gearbox (near to the timing cover plate), we only use this seal (with a smear of silicon)

$7.23
($5.39 USD ) In stock

MINI & MOKE 'RIGID' ENGINE TO GEARBOX HALF MOON SEAL - CAM6548

CAM6548- MINI & MOKE 'RIGID' ENGINE TO GEARBOX HALF MOON SEAL

Originally developed by Rover for warranty work to cut down warranty hour costs on powertrain repairs by their main dealers. This is a special rigid seal and can be pushed in without stripping engine from gearbox.

$11.77
($8.78 USD ) In stock

MINI & MOKE PRIMARY GEAR OIL SEAL- ORIGINAL TYPE - 13H2934

13H2934- MINI & MOKE PRIMARY GEAR OIL SEAL- ORIGINAL TYPE

This seal is the standard aftermarket item and adequate for standard use.

Fits every mini except automatic but in 1992 the factory replaced this with LUF10005 which were meant to be more impregnable against crank pressure build up but racers still prefer our 13H2934MS.

$7.23
($5.39 USD ) In stock

MINI & MOKE PRIMARY GEAR OIL SEAL- COMPETITION TYPE - 13H2934MS

13H2934MS- CLUTCH OIL SEAL PERFORMANCE USE TYPE

Intoduced for competition engines where the increased rev limits or temperature can cause the 13H2934 TO LEAK, this fits all minis except automatic. The factory changed the seal in 1992 to the type with the spring close to the back which has been known to slip off.

$12.68
($9.46 USD ) In stock

MINI & MOKE BLOCK BANJO BOLT FOR OIL PIPE FEED LINE (MUST HAVE BANJO TYPE PIPE) - 2A715

2A715- MINI & MOKE BLOCK BANJO BOLT FOR OIL PIPE FEED LINE

The engine block union bolt that holds the oil fed pipe from the filter on all A series engines (must have the pipe to suit the bolt)

$36.32
($27.08 USD ) In stock