Minisport

Exhaust and manifolds

Pricing:
Sort by:

Mini centre exhaust mount, competition (wont bust) - C-19G3257

C-19G3257- EXHAUST MOUNTING COMPETITION ON FRONT OF REAR SUBFRAME

The center exhaust hanger takes a lot of abuse during hard acceleration or if you're low enough to bottom out on bumps. This mount has a through metal bolt to keep it intact!

$19.95 $14.50
($10.81 USD ) In stock

MINI & MOKE FRONT EXHAUST SUPPORTING BRACKET - GEX7526

GEX7526- MINI FRONT EXHAUST SUPPORTING BRACKET

This is the bracket that bolts onto the diff housing side plates. It uses the 3 diff housing bolts. 

$18.14
($13.52 USD ) In stock

MINI & MOKE EXHAUST PIPE TO ENGINE SUPPORT BRACKET - GEX7053

GEX7053- MINI & MOKE EXHAUST PIPE TO ENGINE SUPPORT BRACKET 

Clamp on the front downpipe that fits to the bracket on the gearbox (GEX7526

$11.77
($8.78 USD ) In stock

Mini centre exhaust bracket (use when fitting RC40 exhaust system) - GEX7248

GEX7248- EXHAUST HANGER CENTRE "S"AND RC40

This is the hanger on the front of the rear subframe for all Coopers and cars with an RC40 exhaust system.

$7.23
($5.39 USD ) In stock

Mini cooper S rear exhaust bracket (use when fitting RC40 muffler) - GEX7249

GEX7249- EXHAUST REAR BRACKET 1275GT & "S" PLUS RC40

this is the hanger on the rear of the rear subframe for all Coopers and cars with an RC40 exhaust system. Attaches to the cotton reel mountings.

$7.23
($5.39 USD ) In stock

Exhaust joint sealant, all cars - EXHAUST SEAL

Mini maniseal exhaust joint sealant, stops any leak from any flange, or where your muffler slides onto your exhaust pipe 

$8.14
($6.07 USD ) In stock

Morris Minor, large bore freeflow exhaust manifold- 1.875" ID - LM053

LM053- Morris Minor, large bore freeflow exhaust manifold

Diamensions are 2" Outside diameter and a 1.875" internal Diameter

$386.36
($288.10 USD ) In stock

Sprite standard bore freeflow manifold extractors- 1.5"ID - C-AHT11

C-AHT11- Sprite standard bore freeflow manifold extractors-

Pipe diamensions are, 1.625" outside diameter and 1.5" internal diameter

$313.64
($233.87 USD ) In stock

Flat exhaust clamp to suit LCB - C-AHT97

C-AHT97- Flat exhaust clamp to suit LCB- 1.625"

Flat exhaust clamp to suit LCB 

$11.77
($8.78 USD ) In stock

Exhaust support bracket (engine to exhaust) - C-AHT94

C-AHT94- Exhaust support bracket (engine to exhaust) 1.5"

Extra support clamp on the C-AEG365 manifolds to clamp it to the engine.

$11.77
($8.78 USD ) In stock

LCB 'dump' pipe connecting Y piece with clamps (suit C-AEG365) - C-AHT197

C-AHT197- LCB 'dump' pipe connecting Y piece with clamps (suit C-AEG365)

LCB 'dump' pipe connecting Y piece with clamps (suit C-AEG365).

$86.36
($64.40 USD ) In stock

Mini rear exhaust clamp/bracket - GEX7084

GEX7084- Mini rear exhaust clamp/bracket

This is the rear mounting bracket/clamp that goes at the back of a STD mini exhaust

$9.05
($6.74 USD ) In stock

Mini exhaust clamp- 38mm (1-1/2") - C4/MC1008

C4- MC1008/Mini 38mm (1-1/2") exhaust clamp

This is an exhaust clamp to suit the original size mini exhaust (not extractor) on a mini. (muffler not included) 

$2.68
($2.00 USD ) In stock

Mini exhaust clamp- 48mm (1-3/4") - C7/MC1011

C7- MC1011- Mini exhaust clamp- 48mm (1-3/4") 

This is an exhaust clamp to suit the extractor on a mini. (muffler/bracket not included) 

$2.68
($2.00 USD ) In stock

Mini exhaust clamp- 52mm (2") - C8/MC1012

C8- MC1012- Mini exhaust clamp- 52mm (2")  

This is an exhaust clamp to suit the extractor on a mini when fitting to brackets etc. (muffler/bracket not included) 

$2.68
($2.00 USD ) In stock