Minisport

Suspension Bushes and bump stops

Pricing:
Sort by:

Mini rear subframe support RUBBER bush kit, rubber (x8 in kit) - 2A5818 (X8)

2A5818- Mini rear subframe suppurt bushes

These are the 8 rubbers that are fitted to support mountings for the rear subframe (all models)

$21.82
($17.14 USD ) In stock

Mini rear subframe support POLY bush kit (x4) 2 kits required for a whole car - C-STR638

C-STR638- Mini rear subframe support POLY bush kit (x4) 2 kits required for a whole car

The Mini's rear subframe is rubber mounted. Polyurethane (stiffer, much longer lasting) bushes are now available for the rear subframe trunions.

$27.23
($21.38 USD ) In stock

MINI & MOKE REAR SUBFRAME BOLTS AND BUSHES ONLY FITTING KIT - MS44

MS44- REAR SUBFRAME BOLTS AND BUSHES ONLY FITTING KIT SUITS HYDRO AND DRY (PAIR)

These rear (PINS) and bushes kit fit at the front of your rear sub-frame, these are using genuine pins with rubber bushes.

$72.68
($57.09 USD ) In stock

MINI ROVER, LARGE RUBBER TRUNNION BUSH 1978 ON (1 ONLY) - 21A2560

21A2560- MINI ROVER, LARGE RUBBER TRUNNION BUSH 1986 ON (1 ONLY)

2 needed for rover minis after 1978 (Mk IV on). The Mini's rear subframe is rubber mounted. Cars manufactured before 1976 used the same bush (2A5818) at the front and rear of the subframe, 8 per car. These were NEVER fitted on australian minis 

$16.32 $11.77
($9.25 USD ) In stock

Mini & Moke radius rod bush kit in rubber (Set of 4) - AYH4199

AYH4199- Mini & Moke radius rod bush kit in rubber (Set of 4)

Set of 4 radius bushes, As fitted to ALL mini's and mokes, these fit on the radius rod/tie bars at the very front of your car. Sold as a set of 4 as it always a good idea to replace these alll at the same time to avoid uneven wear on one side.

$14.36
($11.28 USD ) In stock

MINI & MOKE TIE BAR BUSH- EXTRA HARD- SOLD SINGLE - C-STR628

C-STR628- TIE BAR BUSH EXTRA HARD- SOLD SINGLE

Tie rod extra hard rubber bush, harder than standard. You dont want these bushes too hard as it can cause the threaded on the end of the tie rod to break under extreme conditions. In theory the outer ones should be harder for rigidity in braking and softer on the inside for improving straight line acceleration, which both help stop the weaving associated with the mini especially on large tyres.

$5.41
($4.25 USD ) In stock

TIE BAR BUSH KIT FOR ROAD/RALLY RACE (4 BUSHES) - C-STR627

C-STR627 (set of 4)

USE 2 SOFT RUBBER ON INSIDE AND THE 2 POLY WITH MINISPARES STAMPED ON THEM ON THE OUTSIDE.. HARD OUTERS....SOFT INNERS STOPS BRAKE WEAVING.

$30.00
($23.56 USD ) In stock

Mini tie bar complete rubber and washer kit (bar not included) - 2X PWZ207+2X 2A4328+4X AYH4199+2X NUTS

Mini tie bar/washer and new nut kit, both sides

This is a tie bar kit to do both sides of the tie bars, quite often the tie bar rubbers are gone and the washers that are required (must have two) are in poor condition.

$27.23
($21.38 USD ) In stock

Mini solid subframe metal mount kit (3pces- rover) - MSSK3010

C-STR640/1/2- SUBFRAME SOLID MOUNT METAL KIT (Rover)

NOT FOR AUSSIE CARS, this kit id for Rover mini’s only (or conversions) This is the real way to go if you want to make your front sub-frame solid mounted in metal components to replace the rubber set up on the front sub-frame from 1976 on

$144.55
($113.53 USD ) In stock

Mini & moke rear shock absorber top mounting bush kit- KYB - C2542

C2542- Mini & Moke upper damper/shocker busk kit- Suit ALL KYB and some other brands.

This is the upper damper/shocker bush kit for the top of a rear shock absorber. This kit has, 2 rubber bushes, 2 metal washer, a shocker nut and lock nut. Made for our KYB(Kayaba) range of shockers but will fit some others.

$13.59
($10.67 USD ) In stock

MINI & MOKE REAR SUBFRAME FITTING KIT INC TRUNNIONS. - MS42

MS42- MINI & MOKE REAR SUBFRAME FITTING KIT INC TRUNNIONS

This kit contains all the parts from MS44 plus the 4 cast trunnions that hold the rubber bushes. This complete rear subframe fitting kit is what the factory fitted to minis and all moke in Australia.

Every nut, washer, bolt, rubber bush and 2 pins that hold the rubber bushes that are prone to rusting badly and are required every time you do a subframe change. Including the 2 large penny washers, plus the 4 cast trunnions that hold the rubber bushes- this kit has about 40 components.

$177.27
($139.23 USD ) In stock