Minisport

Oil pumps, parts and coolers

Pricing:
Sort by:

Mini oil cooler to engine block union *Included in kit* - MOC1

MOC1/21A1780- Mini oil cooler to engine block union

The original union that fitted on the A series block to take the oil cooler hose. Many kits now include the union as part of the hose. Block thread 5/8"unf.

$18.14
($13.50 USD ) In stock

Mini oil cooler to filter head union *Included in kit* - MOC2

MOC2/AHA6423- Mini oil cooler to filter head union *Included in kit*

The original union that fitted on the A series block to take the oil cooler hose. Many kits now include the union as part of the hose. Filter head size 1/4"NPT.

$18.14
($13.50 USD ) In stock

MINI 90° 1/2" BSP OIL COOLER UNION - MOC207

MOC207- MINI 90° 1/2" BSP OIL COOLER UNION

1" long from bend to take a push on fit 1/2"hose-has 1/2"BSP thread to fit oil cooler and has 90 degree angle bend.

$18.14
($13.50 USD ) In stock

Mini A series oil feed to filter braided hose. - TAM2106

TAM2106- Braided hose block to filter (A series) 5/8 & 1/4npt unions

The original metal oil pipe from the block to the filter head has been made obsolete by Rover but this use this Braided oil pipe from the block to filter head instead. This kit is 5/8" block union and 1/4"npt filter head.

$118.14
($87.96 USD ) In stock

Mini A+ oil feed to filter braided hose - MOC1018

MOC1018- OIL FILTER BRAIDED OIL FEED PIPE 12A ENG

If you have an engine later than 1990 with a 12A prefix engine number it is likely that you have the later type oil pipe from engine to filter head. (rover A+ motors)

This type has been known to leak and even pop out under arduous conditions and this replacement braided pipe eliminates this problem. Its other major benefit is that the bigger holes allow more flow of oil which can be a cheap source of more BHP and creates any need of an oil cooler under most circumstances.

$135.45
($100.85 USD ) In stock

MINI & MOKE BLOCK BANJO BOLT FOR OIL PIPE FEED LINE (MUST HAVE BANJO TYPE PIPE) - 2A715

2A715- MINI & MOKE BLOCK BANJO BOLT FOR OIL PIPE FEED LINE

The engine block union bolt that holds the oil fed pipe from the filter on all A series engines (must have the pipe to suit the bolt)

$36.32
($27.04 USD ) In stock

MINI & MOKE COPPER SUMP PLUG AND BLOCK WASHER - AED172

AED172- MINI & MOKE COPPER SUMP PLUG AND BLOCK WASHER

Mini Copper Sump Drain Plug Washer, also will fit the oil transfer pipe block fitting (Pre 1992 Blocks)

$2.27
($1.69 USD ) In stock

Mini oil pressure aduster, with chrome knob - HPS4

HPS4- OIL PRESSURE REGULATOR KIT WITH CHROME KNOB

This kit includes a new oil galery plug with an adjustable knob and a washer which is used as a spring seat in the plug against the relief spring. This makes a playform for the adjuster bolt to adjust the engine oil pressure. Winding the knob in increases pressure, winding it out reduces the pressure.

$54.50
($40.58 USD ) In stock

Mini oil pressure aduster, with red knob. - HPS4RED

HPS4RED- OIL PRESSURE REGULATOR KIT WITH RED ANODISED KNOB

This kit includes a new oil galery plug with an adjustable knob and a washer which is used as a spring seat in the plug against the relief spring. This makes a playform for the adjuster bolt to adjust the engine oil pressure. Winding the knob in increases pressure, winding it out reduces the pressure.

$54.50
($40.58 USD ) In stock

Mini oil pressure aduster, with blue anodised knob - HPS4BLUE

HPS4BLUE- OIL PRESSURE REGULATOR KIT WITH BLUE ANODISED KNOB

This kit includes a new oil galery plug with an adjustable knob and a washer which is used as a spring seat in the plug against the relief spring. This makes a playform for the adjuster bolt to adjust the engine oil pressure. Winding the knob in increases pressure, winding it out reduces the pressure.

$54.50
($40.58 USD )

Out of Stock

Mini Magnetic oil trap (no mesh filter) - HPS6

HPS6- MAGNETIC TRAP FOR GEARBOX (NO WIRE MESH)

Fits in place of the oil pick up retainer plate on the back of the gearbox this magnetic plug filter collects metal debris from going back into the power unit but should be regularly cleaned. Also available as the ultimate is the same item with a built in filter gauze available as HPS5

$53.64
($39.93 USD ) In stock

Mini Magnetic oil trap (with mesh filter) - HPS5

HPS5 - MAGNETIC OIL TRAP WITH FILTER

Fits in place of the oil pick up retainer plate on the back of the gearbox this magnetic plug with filter collects metal debris from going back into the power unit but should be regularly cleaned. A non filter type of this version is available as HPS6

$81.77
($60.88 USD ) In stock

KAD A-Series Adjustable Oil Pressure Relief Valve - 1011005

1011005- KAD A-Series Adjustable Oil Pressure Relief Valve

KAD Oil Adjustable Oil Pressure Relief valve replaces the std item and allows the oil pressure to be manually adjusted, a must on any modified engine.

$63.59
($47.34 USD ) In stock

MINI & MOKE OIL PRESSURE SPRING CAP NUT- SECOND HAND - 12A1851_S/H

12A1851SH- MINI & MOKE OIL PRESSURE SPRING CAP NUT (SECOND HAND)

The oil pressure relief valve cap on the front of A series.

$9.95
($7.41 USD ) In stock

MINI & MOKE OIL PRESSURE SPRING CAP NUT - 12A1851

12A1851- MINI & MOKE OIL PRESSURE SPRING CAP NUT

The oil pressure relief valve cap on the front of A series.

$21.77
($16.21 USD )

COMING SOON