Minisport

Driveline

Pricing:
Sort by:

Mini drum brake hub R/H (reconditioned) - R/H HUB _S/H

R/H Drum brake hub upright

This is the drum brake hub upright- it has been totally pulled down, inspected by a mechanic, cleaned, painted and ready for assembly. This upright ONLY suits drum brake and is designed for the R/H side (Grease nipples to the front of the car)

$68.18
($50.89 USD ) In stock

Mini drum brake hub L/H (reconditioned) - L/H HUB _ S/H

L/H Drum brake hub upright

This is the drum brake hub upright- it has been totally pulled down, inspected by a mechanic, cleaned, painted and ready for assembly. This upright ONLY suits drum brake and is designed for the L/H side (Grease nipples to the front of the car)

$68.18
($50.89 USD ) In stock

Mini disc brake front hub/upright (R/H) - FAM2390

FAM2390- HUB FRONT R/H BTA186 COOPER & ALL DISC BRAKE MINIS

Call it a hub, bearing carrier, upright or swivel pin; on the Mini it's all the same thing. You'll need these (FAM2391=left, FAM2390=right) new hubs if you are converting to disc, or if your old hubs will no longer support the bearings properly.

$177.27 $131.82
($98.39 USD ) In stock

Mini disc brake front hub/upright (L/H) - FAM2391

FAM2391- HUB FRONT L/H BTA187 COOPER & ALL DISC BRAKE MINIS

Call it a hub, bearing carrier, upright or swivel pin; on the Mini it's all the same thing. You'll need these (FAM2391=left, FAM2390=right) new hubs if you are converting to disc, or if your old hubs will no longer support the bearings properly. All new and ready to use. Either replace your old one or start a kit to convert to disc.

$177.27 $131.82
($98.39 USD ) In stock

Pair of front Alloy (7075 aircraft grade) drive hubs *KIT* *superlight weight* - FAM2390A

FAM2390A- Pair of front Alloy drive hubs 'KIT' *superlight weight*

Created for Race, Hill Climb and Sprint Cars where absolutely every gram of weight which can be lost, is of the up most importance and top priority. Machined by the latest design CNC machines from 7075 aircraft grade high specification aluminium billet, then hard anodised. These specially designed swivel hubs are not only strong and durable but over 1kg lighter than the standard cast swivel hub!

$1268.18
($946.59 USD ) In stock

Mini gearbox output shaft gasket/diff side plate (non gen) - GUG705567MS

GUG705567GM - GEARBOX OUTPUT SHAFT GASKET (NON GEN)

Gearbox output shaft housing gasket for all minis except auto, may also want to think about doing the seal as well

$2.27
($1.70 USD ) In stock

Mini STD length wheel stud (40mm) - 21A2064

21A2064- WHEEL STUD (35mm) STANDARD LENGTH, NON SPACERED

For the front and rear of all early cars, except those with spacered rear drums fitted which took the longer rear stud 21A1278. This popular stud has found its way on any year mini and lengths being the only deciding factor.

This one is 40mm long, shank length of 35, 22mm of thread.

$3.18
($2.37 USD ) In stock

Mini 8.4" front wheel stud (84 onwards inc metro) - NAM5645

NAM5645- Mini 8.4" front wheel stud (84 onwards inc metro)

Front wheel stud for all minis with 8.4" disc brakes, this also fits the metro. this stud has a 30-32mm long shank from under the head and has 23mm length.

$5.00
($3.73 USD )

OUT OF STOCK

Mini wheel stud, suit smaller spaced drums (55mm) - 21A2064L

21A2064L- Mini wheel stud, suit smaller spaced drums (55mm)

These wheel studs are a little bit longer than STD

Overall lenth of 55mm, shank lendth of 50mm and thread depth of 27mm

$3.59
($2.68 USD ) In stock

Mini cooper S 52mm spaced wheel stud, SOLD SINGLE (60mm) - 21A1278

21A1278- MINI COOPER S REAR WHEEL STUD (sold each)

These studs suit cooper S rear 1 inch spaced drums, even longer studs are available please see our store

This one is 60mm long, shank length of 55mm, 22mm of thread.

$3.59
($2.68 USD ) In stock

Mini wheel stud, 78mm extra long, Sold single (85mm) - ENJO-1040

ENJO-1040- WHEEL STUD (78mm) EXTRA LONG (3.1250")

Longest one piece stud available 78mm long with 30mm thread. Can be used on later wider brake drum but with 3/4"(19mm)spacers only.

This one is 85mm long, shank length of 78mm, 32mm of thread.

$5.41
($4.04 USD ) In stock

Mini wheel spacer and stud kit, 3/8 longer (2 spacers and 8 studs) - CW1

CW1- WHEEL SPACERS 3/8"(9.5MM)

Many aftermarket wheels, when combined with wide tyres, in certain applications will require the use of spacers to avoid tyre rub. Spacers are sold by the pair, and include longer wheel studs.

Spacers are 9.5mm and the studs are 55mm in total length

$54.50
($40.68 USD ) In stock

Mini wheel spacer and stud kit, 3/4" longer (2 spacers and 8 studs) - CW15

CW15- WHEEL SPACERS 3/4"(19MM)

Many aftermarket wheels, when combined with wide tires, in certain applications will require the use of spacers to avoid tyre rub. Spacers are sold by the pair, and include longer wheel studs.

Spacers are 19mm and the studs are 65mm in total length

 

$54.50
($40.68 USD ) In stock

Mini wheel spacer and stud kit, 1 inch longer (2 spacers and 8 studs) - CW16

CW16- WHEEL SPACERS 1"(25.4MM)

Many aftermarket wheels, when combined with wide tires, in certain applications will require the use of spacers to avoid tyre rub. Spacers are sold by the pair

Spacers are 25.4mm and the studs are 65mm in total length

$54.50
($40.68 USD ) In stock

MINI/MOKE 3/4" WHEEL SPACERS WITH EXTRA LONG STUDS ENJO-1040 - CW17

CW17- MINI/MOKE 3/4" WHEEL SPACERS WITH EXTRA LONG STUDS ENJO-1040

Many aftermarket wheels, when combined with wide tyres, in certain applications will require the use of spacers to avoid tyre rub. Spacers are sold by the pair, and include 8 longer wheel studs. These are the largest spacers that will fit the mini rear drum that already has a built in spacer and includes the longer 78mm studs required.

$72.68
($54.25 USD ) In stock