Minisport

Driveline

Pricing:
Sort by:

Mini front drum brake flange (all drum brake cars) - 21A231

21A231- Mini front drum brake flange (all drum brake cars)

Minis with drum brakes use this drive flange! You may also require the spacer 2A4295 on which the inner seal runs. The front hub bearing in this version use the shaft that is part of this flange as the surface for the inner race. In this version the splinned smaller CV joint slides into the flange. The problem with this is that if the wheel bearing end float is not tight enough then the bearing will spin on the shaft and destroy it! The shaft of the flange should be perfectly smooth with no steps or grooves

$90.86 $72.68
($54.20 USD ) In stock

Mini front drum brake sealing ring - 2A4295

2A4295- Mini front drum brake sealing ring

This spacer fits only on the drum brake type drive flange 21A231. It has a champer which fits against the flange correctly. Also used on 997/998 Coopers which had a different drive flange but the same smaller nose cv joint

$14.50 $9.05
($6.74 USD ) In stock

Mini 7.5 Drive flange screw- FLAT FACED - SF604051

SF604051- SCREW DRIVE FLANGE COOPER S

COUNTERSUNK,CROSSHEAD SCREW.16mm TOTAL LENGTH 1/4 UNF. To hold the drive flange to the brake disc on the Cooper S type 7.5"wide brake set up.

$3.00
($2.24 USD ) In stock

MINI DRIVE FLANGE- 7.5" COOPER S & GT- STD EN8 MATERIAL - 21A1270MS

21A11270- MINI DRIVE FLANGE EN24T UPGRADED MATERIAL COOPER S & EARLY 1275GT

Upgraded, Mini Spares own quality UK product from original drawings in EN24. The Mini Cooper "S" drive flange as used on all Mini originally intended to use 10" wheels is an integral part of the front suspension. In addition to providing the connection between the axle and the wheels (thus the term "drive flange")

$54.50
($40.64 USD ) In stock

MINI DRIVE FLANGE- 7.5" COOPER S & GT- EN24T UPGRADED MATERIAL - 21A1270

21A11270- MINI DRIVE FLANGE EN24T UPGRADED MATERIAL COOPER S & EARLY 1275GT

Upgraded, Mini Spares own quality UK product from original drawings in EN24. The Mini Cooper "S" drive flange as used on all Mini originally intended to use 10" wheels is an integral part of the front suspension. In addition to providing the connection between the axle and the wheels (thus the term "drive flange")

$72.68
($54.20 USD ) In stock

MINI & MOKE 8.4 DRIVE FLANGE- EN8 (not turbo) - 21A2695MS

21A2695MS- Mini 8.4 disc brake driving flange

 

This drive flange fits all cars fitted with 8.4" disc brakes except Turbos. (most cars are not metro turbo brakes)

 

Originally intended to use 12" wheels it is an integral part of the front suspension. In addition to providing the connection between the axle and the wheels (thus the term "drive flange") it also provides the outer thrust surface for the wheel bearings.

$72.68 $50.00
($37.28 USD ) In stock

MINI & MOKE 8.4 DRIVE FLANGE- UPGRADE EN24T (not turbo) - 21A2695 (UPGRADED)

21A2695- MINI & MOKE 8.4 DRIVE FLANGE- UPGRADE EN24T (not turbo)

This drive flange fits all cars fitted with 8.4" disc brakes except Turbos. Originally intended to use 12" wheels it is an integral part of the front suspension. Sold singly 2 required per car. made in EN24T!

$81.77
($60.97 USD ) In stock

MINI & MOKE 8.4 DRIVE FLANGE- ALLOY (not turbo) - 21A2695ALLOY

21A2695ALLOY- MINI & MOKE 8.4 DRIVE FLANGE- ALLOY (not turbo)

Machined from a 7075 aircraft grade high specification aluminium billet, then hard anodised. These specially designed Mini Sport drive flanges are not only strong and durable but are 900 grams lighter than the standard component!. Weight of standard steel drive flange - 1.47kg. Weight of Mini Sport aluminium drive flange - 0.57kg

$177.27
($132.19 USD )

OUT OF STOCK- CONTACT US TO ORDER IN

Mini 8.4" 'vented' disc brake driving flange - NAM6450F

NAM6450F- DRIVE FLANGE FOR VENTED DISC BRAKES UK MADE

This version of the Metro vented disc type drive flange is made without the original Metro wheel centralising lugs. The wheel centralising lugs as originally used on the Metro have been removed to allow the fitment of all types of Mini wheels. These flanges must be fitted when using vented discs. Fits all vented disc type derivatives such as ERA and Metro Turbos

$90.86
($67.75 USD ) In stock

MINI & MOKE 8.4" DRIVE FLANGE BOLT - BTA370

BTA370- MINI & MOKE 8.4" DRIVE FLANGE BOLT

4 are required for the drive flange to 8.4" disc set ups and is also the same bolt for limited slip diff crownwheels. 3/8" UNF THREAD 11/16" long. Sold singly

$4.50
($3.36 USD ) In stock

Mini gearbox output shaft gasket/diff side plate- Genuine - GUG705567GEN

GUG705567GM_GEN - GEARBOX OUTPUT SHAFT GASKET (GENUINE)

Gearbox output shaft housing gasket for all minis except auto, may also want to think about doing seal aswell

$4.50
($3.36 USD ) In stock