Minisport

Ignition

This is the heartbeat of your car, and nine times out of ten it needs a pace maker... :-) We are seeing huge sales in electronic ignition setups as a more reliable way of ensuring your car does not let you down, this is not however the only area that special attention should be given, think also about coil/leads/wiring. Give us a call if you need any further help, we would love to chat.

Pricing:
Sort by:

SCREW KIT FOR 45D (LATE) DISTRIBUTORS - 57H5135

57H5135- SCREW KIT FOR 45D DISTRIBUTORS

These are the screws needed to fix the condensor, points, base plate and vacuum to 45D distributors. For 23/25D type see 17H5106. 

$7.23
($5.39 USD ) In stock

Mini 29D rotor button (fits the GL278 cap setup) - GL256

GL256- 29D dissy rotor button

This is the rotor button for the GL278 cap, as fitted to the 29D dissy (you will find the number 29D on the side of the dissy)

$13.59
($10.14 USD ) In stock

Mini rotor button (late-imported) suits screw on dissy cap GDC156 - GRA2143

GRA2143- Mini rotor button (late-imported) suits screw on dissy cap GDC156

This rotor button suits imported electronic dissys (no points fitted)

$9.05
($6.75 USD ) In stock

Rotor button for 123 dissy (C-27H7770/1/2) - GRA123

GRA123- Replacement rotor arm/button for 123 Dissy

Replacement rotor arm/button for 123 Dissy (C-27H7770/1/2)

$27.23
($20.32 USD ) In stock

Side entry dissy cap (25d) early - GDC102

GDC102- Side Entry cap

This is the original mini distributor cap where the leads were secured by screws and was fitted to the 25D range of lucas distributors. This cap had side entry leads and is now only available from one or two manufactures owing to its rarity.

$27.23
($20.32 USD ) In stock

Mini conversion cap- side entry dissy to top cap - GDC103

GDC103- DISTRIBUTOR CAP FOR 25D DISTRIBUTOR TOP ENTRY

Top-entry cap conversion cap, convert that side entry cap to a later model top entry, you then will get a larger rang of leads and more reliability. This is much less prone to wet-weather problems.

$30.00
($22.39 USD ) In stock

Mini side entry dissy power feed terminal/pigtale 25D dissy - 37H2981

37H2981- Mini side entry dissy power feed terminal/pigtale 25D dissy

Mini side entry dissy power feed terminal/pigtale suits the 25D distributor

$12.68
($9.47 USD ) In stock

Mini 29D "large cap" dissy cap - GL278

GL628/46920- 29D dissy cap

This dissy cap is for the 'round shoulder' 29D dissy. 

$45.41
($33.89 USD ) In stock

Mini 'late' dissy cap, fitted to later 74> leyland models (held on by 2 clips about 1 inch long - GDC136

GDC136- LATE DISTRIBUTOR CAP

Fited to Lucas type distributors with 45D body in 1974 held on by 2 small 1 inch clips on either side

$27.23
($20.32 USD ) In stock

Mini 'late' dissy cap, fits 45D/Aldon dissy. Used mainly on sprite/MG - GDC142

GDC142- Mini 'late' dissy cap, fits 45D/Aldon dissy. Used mainly on sprite/MG

Mini 'late' dissy cap, fits 45D/Aldon dissy. Used mainly on sprite/MG when fitting the mini 45D dissy

$50.00
($37.32 USD ) In stock

Mini 'imported' late dissy cap (screws on) - GDC156

GDC156- Late 'screw on' dissy cap- suits rover imported electronic ignition

This was the first mini distributor cap to have screws hold the cap to the body from about 1990 on, where electonic ignition was introduced therefore there is no points or condenser but the rotor arm to use is GRA2143

$22.68
($16.93 USD ) In stock

MINI & MOKE- BRAND NEW DISTRIBUTOR 45D TYPE- POINTS. NOT 1275 - ETC5835

ETC5835- Mini 'points' dissy (new) with vac advance

This distributor is brand new, it will fit into any A series engine and is normally cheaper than getting your old distributor overhauled, includes, dissy, vac advance, new points, new condensor, new rotor button and a new cap! Great Value! This distributor is a replacement for 850/998/1100- we really suggest the ALDON range for 1275 engines as the advance curves are better suited.

$104.55
($78.03 USD ) In stock

Mini new 'late' dissy (suit pre A+ minis) with electronic ignition - ETC5835+K

ETC5835KIT- Mini 'points' dissy (new) with vac advance + with electronic ignition

This distributor is brand new, it will fit into any A series engine and is normally cheaper than getting your old distributor overhauled, includes, dissy, vac advance, new points, new condensor, new rotor button electronic ignition kit and a new cap! Great Value!

This distributor is a replacement for 850/998/1100- we really suggest the ALDON range for 1275 engines as the advance curves are better suited.  Great Value! 

$177.27
($132.32 USD ) In stock

MINI & MOKE ELECTRONIC IGNITION KIT- LEADS/DISSY/COIL/ELEC KIT - ETC5835+K +C-27H7779 + MSC105

ETC5835/ETC5835K/C-27H7779/MSC105- MINI & MOKE ELECTRONIC IGNITION KIT- LEADS/DISSY/COIL/ELEC KIT

This is the ultimate in getting your tired old ignition up to a modern electronic ignition kit. it has a new sports coil, 8mm silicon leads, New dissy with electronic igntion kit installed... this is everything you will require to get that minis hearbeat ticking again

$272.64 $268.18
($200.17 USD ) In stock

Mini 23D distributor (early type)- Non vac 'S' type - 12G2140

12G2140- Mini 23D distributor (early type)- Non vac 'S' type

Cooper"S" 23D distributor, no vac unit-This is NOT THE ORIGINAL LUCAS ITEM as the original company and tooling no longer exist but is a new copy of the 40819. It does have an original type baseplate with a post but NOT the 32ounce contact set as per the original 40819 distributor, but as many people may make the improvement to contactless ignition this is the perfect looking copy.See 12G2140MS for Negative earth only electronic type.

$177.27
($132.32 USD ) In stock