Minisport

New Products

This is for new mini parts that we get in stock, keep your eye on this section of the website daily as we add to it almost everyday, its just one way minisport is trying to keep your mini looking its best!

Pricing:
Sort by:

MINI CLUBMAN PLASTIC CLIP FOR BONNET PROP (AND SUNVISORS ON 64/65 MINIS) - GFK7344

GFK7344- CLUBMAN PLASTIC CLIP FOR BONNET PROP (AND SUNVISORS ON 64/65 MINIS)

Plastic clip for sunvisor 1964-5 and Australian clubman bonnet props (& early UK cars) ,was GHF1120 and ADA4370. the side clip on these models was ADA4484. This set up was used with first plastic mirrrors and black rubber sucker 24A1535

$6.32
($4.88 USD ) In stock

Mini seam cover mirror (Round)- clip on type- Right hand side only - MIRROR01RND

MIRROR01RND- Mini seam cover mirror (Round)- clip on type

Mini seam cover mirror (Round)- clip on type. This mirror attaches to the seam cover and requires no drilling in your door. These are a great alternative to the conventional door mirror. **See description for picture of it attached/in situ**

$45.41
($35.09 USD ) In stock

MINI BONNET LOCK GUIDE PLATE (ROUND NOSE MINI ONLY) - AAM1223

AAM1223- MINI BONNET LOCK GUIDE PLATE (ROUND NOSE MINI ONLY)

This is the original bonnet slam catch- This guide plate for the bonnet locking pin.

$14.50
($11.20 USD ) In stock

MINI RADIATOR LOWER BRACKET- SUIT COOPER "S" ONLY - 12A293

12A293- MINI RADIATOR LOWER BRACKET- SUIT COOPER "S" ONLY

When the "S" motor was introduced to the public a two piece vibration damper was also introduced. This is reputed to be the best system for vibration control for the Mini motor. The only problem with it was that is was bigger and wider than the other version. And in fact the first of the motors had no damper at all! With the close quarters of the Mini engine compartment the bottom radiator mounting became a problem and thus this special lower bracket with a bend in was introduced for ARA2770/RADCOWL002 radiator cowling. If you are upgrading you might need this simple piece that fits to 12A361 bracket!

$31.77
($24.55 USD ) In stock

MINI MK3 ON (ROVER) DOOR ASSEMBLY BARE LESS HINGES R/H (PRE-CRASHBAR TYPE) - BMP326/BMP306MS

BMP326/BMP306MS- MINI (ROVER) MK3ON DOOR ASSEMBLY BARE LESS HINGES R/H (PRE-CRASHBAR TYPE)

Genuine R/H door without crash bar which only later cars had fitted. This door also has no hinges.*EXTRA POST WILL APPLY*

$1177.27
($909.67 USD ) In stock

MINI MK3 ON (ROVER) DOOR ASSEMBLY BARE LESS HINGES L/H (PRE-CRASHBAR TYPE) - BMP327/BMP307MS

BMP327/BMP307MS- MINI (ROVER) MK3ON DOOR ASSEMBLY BARE LESS HINGES L/H (PRE-CRASHBAR TYPE)

Genuine L/H door without crash bar which only later cars had fitted. This door also has no hinges. *EXTRA POST WILL APPLY*

$1177.27
($909.67 USD ) In stock

MINI & MOKE GOLD 'LUCAS' SPORTS COIL- 12V - DLB105

DLB105- MINI & MOKE GOLD LUCAS SPORTS COIL- 12V

This is A MUST for anyone restoring an engine bay or that wants a sports coil, it not only looks fantastic but also really performs. Coil resistance is: 3.5ohms on the primary, 10.6k ohms on the secondary- LUCAS TYPE

$63.59
($49.14 USD ) In stock

MINI & MOKE PAIR OF RETRO P700 HEADLAMPS (WITH H4'S AND PARKERS) - P700

P700- MINI & MOKE PAIR OF RETRO P700 HEADLAMPS (WITH H4'S AND PARKERS)

These are a replica headlamp assembly of the original P700 headlamps as fitted in the 60's. These have been upgraded to the H4 replacement type globes and parker lamps. These headlamps are made for pre ADR cars.

$177.27
($136.98 USD ) In stock

MINI WORKS LAMP BAR S/STEEL PLUS FITTINGS - C-AJJ3329

MSA1101- MINI WORKS LAMP BAR S/STEEL PLUS FITTINGS

Copy of the original heavy duty works lamp bar with all fittings but now in stainless steel for longevity.This type was used on LBL66D on the 1967 MONTE CARLO RALLY. Consists of a central support bracket and 2 end supports to keep the lamps stable under any conditions-this reduces the vibration which would make the extra lights ineffective(other bars offered by competitors that straddle the 2 small single brackets are useless). A black version of this is also available as MSA1101. These cannot be fitted with front overiders and the bottom moulding of the grille slat will need relieving upwards about 25mm and the width of the 2 outer brackets for fitment. This is now a straight bolt on part with our new 2014 re-design for current genuine and non genuine front panels, but the lower part of the grille must be modified. They might entail some cutting of early original front panels and MK1 grille as per original works cars so please do not think this is a bolt on item

 

$222.73
($172.10 USD ) In stock

MINI FRONT APRON PANEL PART R/H CORNER - MS5R

MS5R- MINI FRONT APRON PANEL PART R/H CORNER

RH QUARTER FOR FRONT NOSE PANEL

$81.77
($63.19 USD ) In stock

MOKE KAD GEARSTICK- ROD CHANGE- STANDARD RATIO (LONGER FOR MOKE) - RGM9450

RGM9450- MOKE KAD GEARSTICK- ROD CHANGE- STANDARD RATIO (LONGER FOR MOKE)

This gearstick uses all the same high quality parts from the quickstick but is STD ratio for those who prefer. Special feature also includes our 'lift for reverse' collar system.

Stick measures 55cm long from the ball that goes in the ROD yoke. (Supplied with alloy Gear knob).

$222.73
($172.10 USD ) In stock

MINI FRONT APRON PANEL PART L/H CORNER - MS5L

MS5R- MINI FRONT APRON PANEL PART R/H CORNER

RH QUARTER FOR FRONT NOSE PANEL

$81.77
($63.19 USD ) In stock

MINI OR MOKE FIREWALL BLANKING PLATE WITH 2 HOLES - ALA7530

ALA7530- FIREWALL BLANKING PLATE WITH 2 HOLES

Plate on bulkhead with 2 holes for heater hose- There are 3 types (ALA7530 with holes) or (ALA6592 with one hole) or (ALA6593 blank no holes).

$27.23
($21.04 USD ) In stock

MINI UNION JACK FLOOR MATS (AS SHOWN) - CARPET14

CARPET14- MINI UNION JACK FLOOR MATS (AS SHOWN) SET OF 4

Set of 4 tailor made high quality woven design (not printed) union jack floor mats. Suitable for left and right hand drive.

$136.32
($105.33 USD ) In stock

MINI WASHER BOTTLE MK1/2 ORIGINAL TYPE - 17H2536

17H2536- MINI WASHER BOTTLE MK1/2 ORIGINAL TYPE

Original MK1/2 shape with correct 1.25" small neck. Originally made by Winguard these plastic washer bottles for early Minis were often asked for but rarely available.  The original part number for the Winguard MK1 bottle was ADA3833.

$36.32
($28.06 USD ) In stock