Minisport

New Products

This is for new mini parts that we get in stock, keep your eye on this section of the website daily as we add to it almost everyday, its just one way minisport is trying to keep your mini looking its best!

Pricing:
Sort by:

MOKE KAD GEARSTICK- ROD CHANGE- STANDARD RATIO (LONGER FOR MOKE) - RGM9450

RGM9450- MOKE KAD GEARSTICK- ROD CHANGE- STANDARD RATIO (LONGER FOR MOKE)

This gearstick uses all the same high quality parts from the quickstick but is STD ratio for those who prefer. Special feature also includes our 'lift for reverse' collar system.

Stick measures 55cm long from the ball that goes in the ROD yoke. (Supplied with alloy Gear knob).

$222.73
($164.67 USD ) In stock

MINI FRONT APRON PANEL PART L/H CORNER - MS5L

MS5R- MINI FRONT APRON PANEL PART R/H CORNER

RH QUARTER FOR FRONT NOSE PANEL

$81.77
($60.46 USD ) In stock

MINI OR MOKE FIREWALL BLANKING PLATE WITH 2 HOLES - ALA7530

ALA7530- FIREWALL BLANKING PLATE WITH 2 HOLES

Plate on bulkhead with 2 holes for heater hose- There are 3 types (ALA7530 with holes) or (ALA6592 with one hole) or (ALA6593 blank no holes).

$27.23
($20.13 USD ) In stock

MINI UNION JACK FLOOR MATS (AS SHOWN) - CARPET14

CARPET14- MINI UNION JACK FLOOR MATS (AS SHOWN) SET OF 4

Set of 4 tailor made high quality woven design (not printed) union jack floor mats. Suitable for left and right hand drive.

$136.32
($100.78 USD ) In stock

MINI WASHER BOTTLE MK1/2 ORIGINAL TYPE - 17H2536

17H2536- MINI WASHER BOTTLE MK1/2 ORIGINAL TYPE

Original MK1/2 shape with correct 1.25" small neck. Originally made by Winguard these plastic washer bottles for early Minis were often asked for but rarely available.  The original part number for the Winguard MK1 bottle was ADA3833.

$36.32
($26.85 USD ) In stock

MINI & MOKE CLUTCH LEVER ARM- HEAVY DUTY (PRE VERTO) - 22A2204MS

22A2204MS- MINI & MOKE CLUTCH LEVER ARM- HEAVY DUTY (PRE VERTO)

Ensure you adjust the clutch properly otherwise the hydraulics are powerful enough to bend the ball end of the clutch arm, whether it be a genuine or pattern part.

$54.50
($40.29 USD ) In stock

MINI & MOKE 2ND GEAR- 4 SYNCHRO PRE A+ (26 TEETH) - 22G1094

22G1094- MINI & MOKE 2nd GEAR- 4 SYNCHRO- PRE A+ (26 TEETH)

2nd gear- 4 synchro- Pre A Plus-26 teeth. This is the second gear as used in the pre A+, 4 sync gearbox (14mm mainshaft). Now available NEW! This gear has been unavailable for many years. They are one of the weakest gears in the mini & moke gearbox.

$222.73
($164.67 USD ) In stock

MINI & MOKE DOODERWEAR POSTCARD SET OF 4 - MSA2222

MSA2222- MINI & MOKE DOODERWEAR POSTCARD SET OF 4

A set of four 150mm x 105mm (approx 6" x 4") Dooderwear postcards. Ideal for mounting and framing. 

$4.50
($3.33 USD ) In stock

MINI UNION JACK/ GRAND PRIX RUG 160X120 - RUG

RUG- MINI UNION JACK/ GRAND PRIX RUG 160X120

MINI UNION JACK/GRAND PRIX RUG (160X120). THIS WOULD MAKE THE PERFECT GIFT 

$90.86
($67.18 USD )

OUT OF STOCK

MINI WINDSCREEN WASHER JET MK1/2 (ORIGINAL SHAPE)- SINGLE - GWW807

GWW807- MINI WINDSCREEN WASHER JET MK1/2 (ORIGINAL SHAPE)- SINGLE

Original shape washer jet for Mk1/2 minis. Made to the same specification as the last type made for rover parts sales with a nut on a loose thread so it can be tightened easily by hand in the engine bay without any modifications. 

$12.68
($9.38 USD ) In stock

Moke rear mudflaps (pair) - HYE1174

HYE1174- Pair of Moke Rear mudflaps

The rear mudflaps of a moke are almost as important as the badge on a BMW! These really identify your classic mini moke. The price is for a pair of rear moke mudflaps (as shown)- These are a thick good quality rubber! Comes as shown with a pair of Mudflaps, 2 mounting plates and a set of 6 bolts and nuts! Limited stock!

$136.32 $127.23
($94.06 USD ) In stock

Moke rubber flares (set of 4) front and back (complete with brackets and bolts) - Moke_side _trims

MOKE SIDE FLARES- Moke rubber splash shields

These are a full set of side splash shields that bolt onto the side of mokes. These come COMPLETE with brackets and bolts.

$359.09
($265.49 USD ) In stock

Moke front tombstone seats (sold as a pair)- Black- *NOW IN STOCK* - MOKE_SEATS_FRONT

MOKE_SEATS_FRONT- Moke pair of front tombstone seats in black *IN STOCK*

Front seats on a moke are always normally weathered and tatty. These seats are the tombstyle 'original' seat' and do not have the sliders, however they do have the two holes underneath so you can set them forward or back.

You get two seats at this price and there is no exchange needed! Limited stock- GET IN FAST!

Extra shipping charges will apply (due to size)

$631.82 $540.91
($399.91 USD ) In stock

Moke rear bench seat- Black - MOKE_SEAT_REAR

MOKE_SEAT_REAR- Moke rear bench seat in black *NOW IN STOCK*

This bench seat is a fantastic way to add more seats to your moke, this bench seat will easily fit into the back of your moke. Fits original holes.

Extra shipping charges will apply (due to size)

$540.91
($399.91 USD ) In stock

MINI & MOKE BYPASS HOSE FITTING GOES IN THE HEAD- ORIGINAL TYPE - AYG75

AYG75- Mini & Moke bypass hose head fitting (with HEX nut)

This is the original bypass hose fitting that goes into the head on any mini, this has the HEX nut so you can easily tighten up.

$13.59 $7.23
($5.34 USD ) In stock