Minisport

Gearbox accessories/gearchange

Pricing:
Sort by:

MINI REMOTE GEARCHANGE ANTI RATTLE SPRING - AEG3123

AEG3123- MINI REMOTE GEARCHANGE ANTI RATTLE SPRING

Does your gearshift lever transmits a lot of rattle and noise, replacing this tiny but significant parts will likely cure it. The kit for the Spridget or Minor consists of the brass plunger (22A84) and spring (AEG3123) The cup (2A3467) under the gearelever on mk1 magic wand gearlevers is no longer available.

$2.68
($1.99 USD ) In stock

MINI REMOTE GEARCHANGE ANTI RATTLE BRASS PLUNGER - 22A84

22A84- MINI REMOTE GEARCHANGE ANTI RATTLE BRASS PLUNGER

If your gearshift lever transmits a lot of rattle and noise, replacing these three tiny but significant parts will likely cure it. The kit for the Spridget or Minor consists of the brass plunger (22A84) and spring (AEG3123) plus the nylon cup (2A3467) under the shifter.

$9.05
($6.70 USD ) In stock

Mini rod change selector sleeve - 42H1116MS

42H1116MS- Mini rod change selector sleeve

This is the little selector sleeve that connects the gearchange to the gearbox, on ROD change cars 1974 on. 

$35.45
($26.25 USD ) In stock

Mini rod change gear selector bush (at the back of the gear-changer) - 42H1214

42H1214- Mini rod change gear selector bush (at the back of the gear-changer)

Mini rod change gear selector bush (at the back of the gear-changer). This bush fits into the back of the gearchanger. 2 required per gearchange setup.

$27.23 $15.41
($11.41 USD ) In stock

Mini rod change quick release gear selector coupling - MSG13

MSG13-Mini rod change quick release gear selector coupling

Quick release rod change gear coupling a direct replacement for the standard item, doing away with the troublesome roll pins. It comes complete with high quality quick release clips 

$86.36
($63.95 USD ) In stock

Mini rod change gear lever bias barrel - MSG12

MSG12- GEARBOX BIAS BARREL SLICKSHIFT

Bias spring arrangement fits the shift rod on rod change cars to "bias" the shift lever towards the 3rd/4th gear gate.

$80.91
($59.91 USD ) In stock

Mini gearchange boot (heavy duty) fits all models - AYG3174/22A608

AYG3175 - 22A608

Mini gearchange boot, these are the heavy duty thick rubber type, do not be fooled as there are cheaper variants available but they will last only 1/4 of the time as one of these (due to the tickness of the rubber).

$54.50
($40.36 USD ) In stock

Mini gearchange boot lock down ring (remote) - 14A9942

14A9942- GAITER RING FOR REMOTE/ROD CHANGE

Metal retaining band, suits remote & rod gearchange. Fit and finish is excellent.

$30.00
($22.21 USD ) In stock

Mini upper gear stick boot (suit wand type- 850) - 14A6860

14A6860- GEAR LEVER GAITER MAGIC WAND TYPE

The first Minis had a very simple gear-change; the lever exits the transmission directly thru the floor, well forward. This requires a special boot to accommodate the curves in the floor and tunnel, and being rubber it eventually cracks with age and flexing.

Replace it with the real thing to keep wet or dry road crud out of the car!

As fitted to 850/some budget vans etc.

$30.86
($22.85 USD ) In stock

Mini 850/wand type gearchange boot lock down ring - 14A6861

14A6861- Mini 850/wand type gearchange boot lock down ring

Mini 850/wand type gearchange boot lock down ring

$22.68
($16.80 USD ) In stock

Mini/earlymoke 'wand change' gearstick lower boot - 22A1380

22A1380- GAITER MAGIC WAND GEAR LEVER ON GEARBOX

This boot goes around the gearchange stick and the plate on the back of the gearbox, it stops dirt etc from entering into the gearchange- ONLY suits wand/850 gearchanges.

$27.23
($20.16 USD ) In stock

Mini 'rover' rodchange gear stick boot (UK/JAPAN MODELS ONLY) - CZH4278

CZH4278- GEAR LEVER GAITER ROD CHANGE GENUINE

The actual gear lever gaiter screwed to the floor to stop draughs coming up. For rod change gearbox models only (this is the rover boot, Australian boot is 22A608).

$62.73
($46.45 USD ) In stock

Mini 'Rover' gearchange boot lock down ring (UK/JAPAN MODELS ONLY) - FJN10003

FJN10003- Mini 'Rover' gearchange boot lock down ring (UK/JAPAN MODELS ONLY)

The metal retainer that holds the 'Rover' UK/JAPAN rod change gear lever gaiter CZH4278 in place.

$27.23
($20.16 USD ) In stock

Mini remote gearchange bolt set (set of 4) - CONSUM_BOLTS

Mini remote gearchange bolt set (set of 4)

Set of 4 gearchange bolts to suit the remote (alloy gearchange) setup on minis from 66-73.

$9.05
($6.70 USD ) In stock

Mini quickshift to suit remote gear change (big alloy type) - C-22A1750

C-22A1750- Mini Quickshift to suit remote change gear lever (big alloy type)

This quickshift is a great budget version, it requires some donor parts from you old gear selector but is a very straight forward design. The quickshift works by changing the pivot point of the gear stick thus reducing the distance of travel between gears.

$135.45
($100.30 USD )

OUT OF STOCK