Minisport

Mini 3 screw tail light, screw set - 47H5360

47H5360 - LENS SCREW KIT MK1 REAR LENS (ONE LAMP)

set of three screws to hold the lens for the MK1 rear lamp

Mini clubman tail light lens, Left hand - 37H4837

37H4837- LEFT HAND LENS 'CLUBMAN TAIL-LIGHT'

Rear lens fitted on clubman 71 to 78, these are for Australian clubman’s only.

Mini clubman tail light lens, Right Hand - 37H4838

37H4838- REAR RIGHT HAND LENS 'CLUBMAN TAIL-LIGHT'

Rear lens fitted on clubman 71 to 78, these are for Australian clubman’s only

MINI LEYLAND REAR LAMP SCREW SET (6 SCREWS IN A SET) - 37H5751

37H5751 - MINI LEYLAND/MK2&3 REAR LAMP SCREW SET (6 SCREWS IN A SET)

Stainless steel screw kit for all MK2/3 lens to lamp body. Comes as a car set with six screws and six fibre washers. 

MINI FLY OFF HANDBRAKE KIT - C-AJJ4019

MINI FLY OFF HANDBRAKE KIT 

Pt number: C-AJJ4019

Fly-off handbrake kit, this is a very simple conversion to reverse the way that your handbrake works, instead of pushing button in to release handbrake you push button in to hold handbrake on.

You are not buying the handbrake itself, you are only buying the rivets and pivot part.

Mini Mk1 cooper S heater knob, re-made in AUSTRALIA - 24A151

24A151- MK1 cooper S, heater knob

This knob fits on the control lever on MK 1 cooper S heaters, if you are unsure this type has a lever that you lift up or down in a vertical position it also says OFF/SCREEN/CAR on it.

Mini Clubman heater/fan control knob (heavy duty type) - HEATER KNOB CLUB

HEATER KNOB CLUB- Mini Clubman heater control knob

These have a terrible habbit of falling off and then geting 'sucked up' by the old vacuum cleaner. These are a little more heavy duty and will save your fingers form getting sore poshing those steel levers accross

Mini rover rear boot lid handle 'chrome' - JRC2844

JRC2844- ROVER BOOT HANDLE MK3 'CHROME'

Mk III Chrome boot handle as fitted to all Rover 'import models' saloons from 1970 on. Includes 2 keys and paper gaskets. Not for Australian cars!

Mini clubman outer door lock rod clip - MYH407

MYH407- Mini Clubman inner door lock arm retaining clip

This clip is quite unique in the way it works, it attaches to some of the critical lever arms inside of clubman doors, It is worth its weight in gold! 

Mini headlight and (clubman grille) screw plug (X1) - GHF1021

GHF1021- Headlight screw plug (cuts own thread to PK)

This plug pops into the 'square' hole in your mini body behind your headlights, this also fits into the top panel of clubmans.

Mini outer door window glass rubber and inner felt clip (X1) - 34G939

34G939- Mini outer door glass & inner felt clip

Secures the chrome strip to the body as well as to the rubber strip to the chrome, this clip also does the same for the NEW inner felts fits all australian made models

Mini morris door striker plate 'windup window door' - HYA2805

HYA2805- Mini morris door striker plate. 'windup doors'

This door striker is made for the windup 'aussie' doors, this will suit almost all minis from 66-71. These are made in Australia and are limited stock at this time. Does either left or right hand side.

Mini boot lid flap screw (can also be used for door striker on aust cars) - CONSUM_211081

211081- MINI BOOT FLAP SCREW 3/16 (also can be used on Australian door strikers)

This is a boot flap screw that holds the boot flap hinge onto the car, there are 6 of these required per car. the thread is 3/16th of an Inch. these screws can be used on the australian door strikers HYA2805 (you will need to run a 3/16 tap)

Morris mini door coil spring 'snail spring' - HYA3512

Morris mini door spring 'Snail spring' 

This spring holds the outer door handle up to the rubber stopper keeping the outer handle totally horizontal, fits inside the door and goes around the shaft of the outer door handle

MINI 850/COOPER/SLIDING WINDOW DOOR HANDLE LOCKING HANDLE, (PRE 1966 MK1 CARS)- LEFT OR RIGHT - 24A1140

24A1140- MINI 850/COOPER/SLIDING WINDOW DOOR HANDLE LOCKING HANDLE, (PRE 1966 MK1 CARS)- LEFT OR RIGHT

Mini 850/Cooper sliding window door handle, not for Australian 'wind-up' window cars. This locking handle does both the left and right hand side but you will need to change the escutcheon depending on the side you need (24A2245 for R/H escutcheon or 24A2246 for the L/H escutcheon)