Mini parts online l Minisport Australia

Minisport

SU PARTS, CARBURETORS AND FUEL SYSTEMS

Pricing:
Sort by:

MINI & MOKE 45MM EFI SETUP (WITH TRIGGER POINT IGNITION) - EFI KIT 1

EFI KIT 1- MINI & MOKE 45MM EFI SETUP (WITH TRIGGER POINT IGNITION)

Fully mappable engine management system for A-series 5 port engines. This system delivers all the power of a Weber DCOE carburettor but with the drivability and smoothness of full engine management. The system is simple to install and fits into a standard Mini with no body modifications. This is a cost effective upgrade and suitable for all engines from 850-1460cc.

$3177.27
($2296.28 USD ) In stock

Mini heat shield KIT to suit twin 1-1/4 SU's (comes with springs) - MSSK008

MSSK008- Mini twin 1-1/4 heatshields

Mini heat shield made to original specs, this heatshield fits twin 1-1/4 carby setups, comes with springs for your twin carbies

$40.91
($29.57 USD ) In stock

Mini twin carby heatshield kit 1.25", in stainless steel (1-1/4") - MSSK1005

MSSK1005- HEAT SHIELD STAINLESS STEEL KIT HS2 (1-1/4) TWIN CARBS

Stainless steel twin HS2 (1-1/4) heat shields kit. Comes with link bar ,bolts, nuts and springs.

$60.00
($43.36 USD ) In stock

Mini twin carby heatshield kit 1.5", in stainless steel (1-1/2") - MSSK1006

MSSK1006- HEAT SHIELD STAINLESS STEEL KIT HS4 TWIN CARBS

 Pair of heatshield brackets and cross bar these are made similar to the original cooper HS2 design but ARE for HS4 (1.5") carbys and include the 3 correct springs that attach to the bridging bar for choke return linkage

$60.00
($43.36 USD ) In stock

MINI & MOKE HEAT SHIELD BLACK KIT HS4 TWIN CARBS- 1-1/2" - MSSK1004

MSSK1004- MINI & MOKE HEAT SHIELD BLACK KIT HS4 TWIN CARBS- 1-1/2"

Pair of heatshield brackets and cross bar. these are made similar to the original cooper HS2 design but ARE for HS4 (1.5") carbs and include the 3 correct springs that attach to the bridging bar for choke return linkage.

$45.41
($32.82 USD ) In stock

Mini single HIF44 heatshield (can be modified to fit 1-3/4") - CAM4942

CAM4942- Mini HIF44 heatshield

This heatshield suits the HIF44 series carby and can be modified to fit the 1-3/4" carby 

$54.50
($39.39 USD ) In stock

Mini HIF44 spacer block (9.5mm) - GUG705964GM

GUG705964GM- Mini HIF44 spacer block (9.5mm)

Mini HIF44 spacer block (9.5mm)

$45.41
($32.82 USD ) In stock

Mini 1.25" (1-1/4) SU ram stax, short type (one and a half inch long) - C-AHT245

C-AHT245- RAM STAX HS2 SHORT

1.5" long ram pipe for 1.25" SU.
General: Velocity stacks, or ram pipes, are necessary on SU carburettors for a variety of reasons. Running an SU devoid of anything to regulate air flow around the carburettor mouth creates a constriction. This is caused by air being forced around a 90 degree angled edge immediately prior to the carb mouth, effectively reducing the flow throughout the induction system.

$58.18
($42.05 USD ) In stock

Ramtube for 1-1/4" carby (1.5" long) - RRT125-1.50

RRT125-1.5- Ramtube for 1-1/4" carby (1.5" long)

Ramtube for 1-1/4" carby. The tube is 1.5" long.

$53.64
($38.76 USD ) In stock

Ramtube for 1-1/4" carby (2.0" long) - RRT125-2.00

RRT125-2.0- Ramtube for 1-1/4" carby (2.0" long)

Ramtube for 1-1/2" carby. The tube is 2.0" long.

$53.64
($38.76 USD ) In stock

Ramtube for 1-1/2" carby (1.5" long) - RRT150-1.50

RRT125-2.0- Ramtube for 1-1/4" carby (2.0" long)

Ramtube for 1-1/2" carby. The tube is 2.0" long.

$53.64
($38.76 USD ) In stock

Ramtube for 1-1/2" carby (2.5" long) - RRT150-2.50

RRT150-2.50- Ramtube for 1-1/2" carby (2.5" long)

Ramtube for 1-1/2" carby. The tube is 2.5" long.

$53.64
($38.76 USD ) In stock

MINI PCV VALVE SUPPORT BRACKET - 12G609

12G609- MINI PCV VALVE SUPPORT BRACKET

This is the bracket that holds the PCV onto the original manifold.

$11.77
($8.51 USD ) In stock

MINI PCV TOP CLIP (HOLDS THE TOP ON THE PCV VALVE) - 27H7760

27H7760- Positive Crankcase Ventilation valve top clip

This is the clip that holds the top on your PCV valve, it is very important to have as without it your PCV is useless.

$9.05
($6.54 USD ) In stock

MINI PCV VALVE SPRING (INSIDE PCV) - 27H7756

27H7756- MINI PCV VALVE SPRING (INSIDE PCV)

This is the spring that goes inside your PCV valve, it is very important to have as without it your PCV is useless.

$9.05
($6.54 USD ) In stock