Minisport

SU PARTS, CARBURETORS AND FUEL SYSTEMS

Pricing:
Sort by:

MINI PCV (EMISSION VALVE) RUBBER DIAPHRAGM FOR 13H5191 - 27H7758

27H7758- RUBBER DIAPHRAGM FOR PCV

The rubber diaphragm that sits in the exhaust emission valve. known as the PCV on a Cooper S and some variants/It sat on the inlet manifold and a clip holds the top on to where this rubber sits.

$18.14
($13.52 USD ) In stock

MINI PCV VALVE PLUNGER (INSIDE PCV) - 149342

149342- MINI PCV VALVE PLUNGER (INSIDE PCV)

This is the plunger/plate that goes inside your PCV valve, it is very important to have as without it your PCV is useless.

$18.14
($13.52 USD ) In stock

Mini cooper S PCV valve for closed circuit breathing - S/HAND 13H5191 (+27H7758)

13H5191 (REBUILT)- PCV EMMISSION VALVE for closed circuit breathing *REBUILT*

This very commonly used device has been very uncommon to find. We now have them! The valve is needed on most nearly all twin carb models such as MG midget, MGB and of course Cooper S models to pass emissions control tests, but a properly operating valve has no adverse effect on performance, but may improve it.

New rubber diaphragm is fitted to this rebuilt part!

$136.32
($101.65 USD )

STOCK GETTING LOW- PLEASE CALL TO CHECK.

MINI & MOKE PCV FOR CLOSED CIRCUIT BREATHING (AS USED ON COOPER S) - 13H5191

13H5191- PCV EMMISSION VALVE for closed circuit breathing

This very commonly used device has been very uncommon to find. We now have them! The valve is needed on most nearly all twin carb models such as MG midget, MGB and of course Cooper S models to pass emissions control tests, but a properly operating valve has no adverse effect on performance, but may improve it. The rubber diaphragm is available as 27H7758

$163.59
($121.98 USD ) In stock

Mini SU dash pot oil (goes in top of carby) - BDR125

BDR125- CARB DASHPOT OIL FOR SU RANGE

Correct and original thickness oil for SU carby dashpots. Don’t be fooled -use the right stuff

$22.68
($16.91 USD ) In stock

Mini Blue carby (SU) spring - AUC4387

AUC4387- Mini carby blue spring

Depending on your engine size and carbys that you are running, you may have to run a red or blue carby spring, to find out what you need have a look at our reference guide (CLICK ON ITEM)

$11.82
($8.81 USD ) In stock

Mini red carby (SU) spring - AUC4587

AUC4587- Mini carby Red spring

Depending on your engine size and carbys that you are running, you may have to run a red or blue carby spring, to find out what you need have a look at our reference guide (CLICK ON ITEM)

$11.82
($8.81 USD ) In stock

Mini fixed needle, 090 thou, (most comman in 1-1/4) - NEEDLE_1-4

Needle- fixed 090 thou (1-1/4)

Depending on your engine size and carbys that you are running, the needle can change quite dramatically, this needle setup was more commonly fitted to 1-1/4 carbys , to find out what you need have a look at our reference guide (CLICK ON ITEM)

$30.91
($23.05 USD ) In stock

Mini floating needle, 090 thou, (most comman in 1-1/2) - NEEDLE_1-2

Needle- floating 090 thou (1-1/2)

Depending on your engine size and carbys that you are running, the needle can change quite dramatically, this needle was more commonly fitted to 1-1/2, to find out what need contact us.

$30.91
($23.05 USD ) In stock

SU needle conversion bush/screw from floating to fixed needle - WZX2003

WZX2003- SU needle conversion bush/screw from floating to fixed needle

This is the conversion kit from floating needle to fixed needle, it gives you more of a choice in needles and may allow you to run your existing needle in another carby.

$18.14
($13.52 USD ) In stock

Mini twin SU fuel line T piece, 1/4" - 12H889

12H889- "T" PIECE 1/4" SU TWINS MTP001

Used in petrol fuel lines to take 1/4" petrol hoses it is used mainly on twin carb set ups for petrol being diverted to the 2 carbs

$12.00
($8.95 USD ) In stock

Mini inlet manifold locating rings, suits 12G295 heads - 12G297

12G297- INLET MANIFOLD LOCATING RING

Locating rings originally made for 12G295 heads with twin carbs to lign up the inlet maniold to the inlet ports on the cylinder head it found its way on most twin carb factory produced cars. There is a recess in the inlet port on the head and usually the inlet manifold to take these spacers.

$2.68
($2.00 USD ) In stock

Mini SU main jet adjusting spanner - CA39

CA39- SU main jet adjusting spanner

This spanner is small enough to get to that SU main jet adjusting nut, fits both 1-1/4" and 1-1/2" SU's- This is a MUST for any tight main jet.

$9.05
($6.74 USD ) In stock

Mini SU 1-1/4" silver carby cover - R22

R22- DASHPOT HS2 CARB COVER-ALLOY

Brighten up your engine bay area with these bright alloy carb covers --these fit HS2 1.25" type carbs only

$27.23
($20.30 USD ) In stock

1-1/2 SILVER carby covers- R23 - R23

 1-1/2 SILVER carby covers- R23

Brighten up your engine bay area with these bright alloy carb covers --these fit HS4 1.5" type carbs only, these simply slip over your dash pot on your carby.

$21.82
($16.27 USD ) In stock