Minisport

Mounts and engine supports

Pricing:
Sort by:

STEADY ROD BOLT FOR 21A1109 BAR TO ENGINE - 1 7/8" LONG - BH605151*

BH605151- STEADY ROD BOLT FOR 21A1109 BAR TO ENGINE - 1 7/8" LONG

Engine stabiliser arm to block bolt. This is the longer bolt that fits the engine stabiliser rod to the cylinder block.

$1.77
($1.37 USD ) In stock

MINI & MOKE TOP ENGINE STEADY BRACKET (DOG LEG) - 21A2387

21A2387- MINI & MOKE TOP ENGINE STEADY BRACKET (DOG LEG)

This bracket is fitted to the top engine stabiliser arm on the engine end to help retain the bushes and arm.

$27.23
($20.97 USD ) In stock

MINI & MOKE STAY BAR ROD *RECONDITIONED* - 21A1109

21A1109- Mini stay bar rod *reconditioned*

Mini stay bar rod, these come in two styles (straight or with a kink in them) they are the same length and make no difference. these have been sandblasted and repainted and are ready to go for another 40 years!

$31.77
($24.48 USD ) In stock

ENGINE STABILISER BAR ADJUSTABLE AS FITTED TO TURBOS - MSSK1305

MSSK1305- ENGINE STABILISER BAR ADJUSTABLE AS FITTED TO TURBOS (INC BUSHES)

Adjustable Top engine stabiliser steady bar for classic Mini- Takes either standard rubber or deflex eng stabiliser bushes. Fitted with Poly bushes.

$81.77
($62.99 USD ) In stock

Mini engine steady bush kit (rubber)- (4 bushes) - 2A5875

2A5875 (x4)- Mini engine steady bush kit (rubber)

This is 4 bushes (enough for one side) for your engine steady bush/bar.

$12.00
($9.24 USD ) In stock

Mini engine steady bush kit (polyurethane) - C-STR630

C-STR630- STABILISER BUSH POLYURETHANE ENGINE KIT

A "must have" for every car! All the torque action of the motor is controlled by the stabilizer arm located just above the flywheel housing. If you are still using original-type rubber bushes you are living in the past!

$18.18
($14.01 USD ) In stock

Mini engine steady bush kit (polyurethane) plus metal stay bar bush - C-STR630+BUSH

C-STR630- STABILISER BUSH POLYURETHANE ENGINE KIT- PLUS METAL INNER BUSH

A "must have" for every car! All the torque action of the motor is controlled by the stabilizer arm located just above the flywheel housing. If you are still using original-type rubber bushes you are living in the past!- PLUS METAL INNER BUSH (AS PER PICTURE)

$20.00
($15.41 USD ) In stock

Mini engine steady bar 'HARD' bush kit (poly) RACE - C-STR630RACE

C-STR630RACE- STABILISER BUSH HARD POLYURETHANE ENGINE KIT

A "must have" for every car! All the torque action of the motor is controlled by the stabilizer arm located just above the flywheel housing. If you are still using original-type rubber bushes you are living in the past! THESE ARE EXTRA HARD FOR COMPETITION OR WHERE ENGINE TRANSMITTED NOISES ARE NOT A PROBLEM. USE C-STR630 IF YOU WANT QUIET BUSHES THAT DO NOT TRANSMIT NOISE

$27.23
($20.97 USD ) In stock

Mini staybar inner metal bush - STAYBARBUSH

Mini engine stabilizer bush

This bush fits inside the engine stay bar rubbers/poly mounts; quite often they rust up or are damaged. Will fit ALL top engine ‘dog bone’ stay bars

$4.55
($3.50 USD ) In stock

Mini engine steady repair kit (no breather) and 1 long broken bolt - MSSK002

MSSK002- MINI ENGINE STEADY REPAIR KIT

If the longer engine block bolt that goes through the engine stabiliser bushes is broken and there is no engine breather fitted use kit use MSSK002.

$36.32
($27.98 USD ) In stock

Mini engine steady repair kit (no breather) and 2 broken bolts - MSSK004

MSSK004- MINI ENGINE STEADY REPAIR KIT (2X BROKEN BOLTS- NO BREATHER)

Applications: Both the engine block bolts are broken and no breather is fitted on the clutch housing. USE MSSK004

$45.41
($34.98 USD ) In stock

Mini engine steady repair kit (with breather) and 2 broken bolts - MSSK005

MSSK005- Mini engine steady repair kit (with breather) and 2 broken bolts

Mini engine steady repair kit (with breather) and 2 broken bolts.

$72.68
($55.99 USD ) In stock

Mini diff housing bush for rodchange support bar - 13H7286

13H7286- Mini diff housing support rod bush (suits ROD change)

This bush inserts into the rear of the diff housing, it only suits rod change cars from about 74on (it has two rods instead of the big alloy support gearchange)

$20.00
($15.41 USD ) In stock

Mini Right hand lower engine stabiliser kit - MSSK

MSSK- Right hand lower engine stabiliser kit

 

This kit is designed to greatly improve engine stability on all minis, mostly used on later rod change >73 model minis (clubman’s) easy to fit and will stop that engine from flopping around!

$54.50
($41.98 USD ) In stock

Mini left hand lower engine stabiliser kit - MSSK001

MSSK1- left hand lower engine stabiliser kit

This kit is designed to greatly improve engine stability on all minis, mostly used on later rod change >73 model minis (clubman’s) easy to fit and will stop that engine from flopping around!

$54.50
($41.98 USD ) In stock