Minisport

Seats and seat parts

Pricing:
Sort by:

MINI SEAT ADJUSTER HANDLE KNOB - 14A6528

14A6528- MINI SEAT ADJUSTER HANDLE KNOB

This knob fits on the seat adjuster on the lower frame of the seat. These handle knobs have a bad tendancy of going astray- Here is a replacement!

$9.05
($6.77 USD )

OUT OF STOCK- NO LONGER AVAILABLE

Mini seat bracket (attaches to the seat support crossmember) - 24A1495

24A1495- Mini seat pivot bracket (attaches to the seat support crossmember)

Mini seat pivot bracket (attaches to the seat support crossmember)

$27.23
($20.37 USD ) In stock

Mini seat bolt & wing nut (1 nut and 1 wing nut) - SEAT BOLT

SB1- Seat bolt and wing nut

This is the seat bolt (cheesehead bolt) and a wing nut that helps secure the front seat to the bracket on most minis.

$3.59
($2.69 USD ) In stock

Mini seat trim clip (holds vinyl to the frame) - GHF1500

GHF1500- Mini seat trim clip (holds vinyl to the frame)

Mini seat trim clip (holds vinyl to the frame)

$1.36
($1.02 USD ) In stock

Mini seat adjusting brackets (moves the seat further back) - BG5001MS

BG5001MS- SEAT ADJUSTER BRACKETS PAIR

Seat Spacers If you think you are too tall for the Mini. These brackets allow you to really stretch out.

$18.14
($13.57 USD ) In stock

Mini 'spring' seat base, (suit all models) as fitted to late roundnose - CZH3508MS_SPRING

CZH3508MS_LATE- SEAT DIAPHRAGM MK1/2 FULL WEBBING INC BHA5097 CLIPS

This wire strap type was fitted from 1974 (in England) as standard, but this will fit all minis from 1959 to 1995.

$72.68
($54.39 USD ) In stock

MINI SEAT DIAPHRAGM IN FULL RUBBER - CZH3508RUBBER

CZH3508RUBBER- Classic mini (UK Quality) seat rubber

Seat base to suit either Morris/Leyland front seats, this is a must on a lot of minis due to the rubber going hard and breaking, thus putting your bottom lower in the front seat.

$86.36
($64.63 USD ) In stock

Mini rover seat diaphram (1993-2000) - HGD100150

HGD100150- Mini rover seat diaphram (1993-2000)

In 1993 the seat frames were changed and although the base frame looks very similar to earleir models, there is a difference in the shape. At this time the seat diaphragm was changed to a special rubber/woven design known as the "Suisiara" model.

$117.27
($87.76 USD ) In stock

REAR/BACK STRAP KIT FOR A PAIR OF MINI FRONT SEATS - ST3002 MINI STRAPS

ST3002 MINI STRAPS- REAR/BACK STRAP KIT FOR A PAIR OF MINI FRONT SEATS

This is the strap kit (Pirelli rubber) that goes in the back of the mini seat. This kit will do the back of both of your mini seats. This kit is for the low back seat (not clubman). If you are unsure if this kit will fit your car contact us. 1 kit does 2 seats!

$177.27
($132.66 USD ) In stock

REAR/BACK SPRING KIT FOR A MINI FRONT SEAT - C708 MINI F/SEAT

C708 MINI F/SEAT- REAR/BACK SPRING KIT FOR A MINI FRONT SEAT

This is a spring kit that can be fitted in the back of the mini seat. This kit will do the back of both your lowback mini seat. This kit is for the low back seat (not clubman). If you are unsure if this kit will fit your car contact us. 1 kit does 1 seat! (2 required per car)

$72.68
($54.39 USD ) In stock

AUSTRALIAN MINI FRONT SEAT COVERS (PAIR)- BLACK- LOW BACK - SC3065A

SC3065A- Australian front seat covers (Pair)- Black- low back

This is a pair of Australian front seat covers. They are in black and made for the low back seat frames as used in deluxe, cooper S and mini K. You get 2x upper and 2x lower seat cover trims. These are to be used when your old seats are cracked and broken and should be installed by a professional trimmer (as quite often the padding needs to be replaced too).  

$722.73 $631.82
($472.80 USD ) In stock

AUSTRALIAN MINI FRONT SEAT COVERS (PAIR)- CREAM- LOW BACK - SC3065C2

SC3065C2- AUSTRALIAN MINI FRONT SEAT COVERS (PAIR)- CREAM- LOW BACK

This is a pair of Australian front seat covers. They are in cream and made for the low back seat frames as used in deluxe, cooper S and mini K. You get 2x upper and 2x lower seat cover trims. These are to be used when your old seats are cracked and broken and should be installed by a professional trimmer (as quite often the padding needs to be replaced too).  

$722.73
($540.83 USD )

MADE TO ORDER- UP TO 4 WEEKS TO MAKE.

MINI FRONT SEAT BASE FOAM- HUMPY. - SF659 MINI MK1

SF659 MINI MK1- MINI FRONT SEAT BASE FOAM- HUMPY.

This cushion was used on the majority of MK.I front seats.It is about 2" thick and has an extra 1" thick piece that can be glued to the front edge to give the seat cover definition and also support for your legs!

$81.77
($61.19 USD ) In stock

MINI FRONT SEAT SQUAB PADDING KIT - SF666 MINOR/MINI

SF666 MINOR/MINI- MINI FRONT SEAT SQUAB PADDING KIT

This pad is made from a composition of rubberised horse hair and is very tough. The pad is glued to the squab frame and then needs to be trimmed to follow the outer edge of the frame. The white wadding material is then laid over this edge and basically softens the edge of the hair pad before the seat cover is fitted. To aid seat fitting, cut a strip off the plastic bag that your seat covers were packed in and lay over the wadding. This will help the seat cover to slide easily over the padding.

$54.50
($40.78 USD ) In stock

MINI FRONT SEAT BASE FRAME FOAM WRAP- PAIR - SF660 MINI/MINOR (X2)

SF660 MINI/MINOR (X2)- MINI FRONT SEAT BASE FRAME FOAM WRAP- PAIR

This is just a simple item, but when fitted to the base frame of your seat frame under the seat cover skirt,it will soften the look of the frame and protect the cover from damage.

$27.23
($20.37 USD ) In stock