Minisport

MINI 3 SYNC 2ND/3RD GEAR NEEDLE ROLLER - 22G149

22G149- MINI 3 SYNC 2ND/3RD GEAR NEEDLE ROLLER

These needle rollers were fitted under 2nd and 3rd gears on the 3 synchro B type gears gearbox only. 26 per gear and used on MG midgets also.

MINI & MOKE 850/998/1100 new primary gear (suits pre A plus/Aussie cars) - 22A1493

22A1493- Mini 850/998/1100 new primary gear (suits pre A plus/Aussie cars)

Mini 850/998/1100 new primary gear (suits pre A plus/Aussie cars)- this will not suit A plus or 1275 cars

MINI/MOKE 1275 PRIMARY GEAR (FITS ALL PRE A+ 1275) 24 TOOTH - 22G1053

22G1053- PRIMARY GEAR COOPER S & 1300 PRE A PLUS,GENUINE

For all pre A plus 1275 engines with a stepped bush fitting to suit crankshaft

MINI & MOKE 1275 PRIMARY GEAR- PRE A PLUS- FLOATING BUSH TYPE - C-22G1053

C-22G1053- 1275 PRIMARY GEAR PRE A PLUS 1275 FLOATING BUSH TYPE

For all pre A plus 1275 engines with a floating bush fitting to suit stepped crankshaft. Uses a floating bush with a circlip to hold it in place. 

MINI & MOKE PRIMARY GEAR REAR BUSH TOP HAT TYPE - 22G109

MINI & MOKE PRIMARY GEAR REAR BUSH TOP HAT TYPE

This is the top hat bush for all primary gears and is now silicon based to help lubrication of this dry running bush. Used in all our primary gears.

OUTER TRACK 1st GEAR/2nd SYNCHRO 22G1119 SPRITE - 22G1118

22G1118/22G326- OUTER TRACK 1st GEAR/2nd SYNCHRO 22G1119 SPRITE

Outer track only for the sprite and midget 3 synchro gearbox first gear. This part number was for complete 1st gear hub assembly originally and the outer track was 22G1119 but when Rover stopped production we used this same number for the non genuine outer track. Original part number for assembly was 22G326.

1ST/2ND SYNCHRO HUB ASSEMBLY B TYPE 3 SYNCHRO - 22A1021

Available again- 3 synchro B type gearbox 1st and 2nd synchro hub assembly for the mini. BEWARE -the outer track from the Sprite (22G1119) part of 22G1118 is not reliable enough in a Mini gearbox as it allows balls and springs to fly out from the synchro hub when there is any undue wear in any parts of the gearbox. Original Mini had 22G439 stamped on outer track.

MINI SYNCHRO SPRING FOR 3 SYNCHRO HUB - 22A367

22A367- MINI SYNCHRO SPRING FOR 3 SYNCHRO HUB

Synchromesh spring for the 3 synchro gearbox. Fits 1st/2nd and 3rd/4th hub. 3 required per hub and 6 per gearbox. longer than the 4 sync springs. - Quite often if these springs are weak they will give an almost syncro ring problem crunch. Only suis a 4 speed all sync box. 3 springs/balls per hub, 2 hubs per gearbox.  

BALL BEARING FOR SYNCHRO HUB 3&4 SYNCHRO - BLS107

BLS107- BALL BEARING FOR SYNCHRO HUB 3&4 SYNCHRO

Inside your gearbox synchro hubs are 3 springs and these ball bearings to lock it in and out of gear. Often pop out and get lost when splitting the inner and outer hub.

MINI & MOKE BAULK RING TO ORIGINAL ROVER SPEC - 22G2033EVO

22G2033EVO- MINI & MOKE BAULK RING TO ORIGINAL ROVER SPEC

Mini Spares own made for reliability-we use them on our 5 speed gearboxes because the Rover version was not good enough, these specials are CNC grooved and machined for concentricity using original type fixings to get the correct areas of heat treatment plus correct angles on specific areas all from the original drawings making them similar/same as to what Rover supplied pre 2000 in performance quality and reliability. They are now better and cheaper than the current Rover product.

MINI & MOKE BAULK/SYNCRO RING- COMPETITION GRADE - C-22A1741

Performance Baulk ring to suit a mini or moke. This current competition baulk ring is cnc part machined then heat treated and then grooved for accuracy and concentricity in a certain grade of metal. 

MINI & MOKE HIGH GRADE LAYSHAFT- 3 SYNCRO ONLY - C-22A1731

Layshaft for 3 syncromesh gearboxes, this suits all morris early deluxe minis where you you have to stop to put the car in first gear.  If you need bearings for this you will need (X2) HYL8473.

MINI & MOKE LAYSHAFT NEEDLE ROLLER (ALL PRE A+) - HYL8473

MINI & MOKE- MAINSHAFT BEARING- DOUBLE ROLLER- NON GENUINE - AAU1365MS

This is a mini or moke double row bearing for the mainshaft (pinion end). This is the after market bearing- but still good quality. The retaining clip that goes around the outside (in the groove) is ADU4992.

MINI & MOKE- MAINSHAFT BEARING- DOUBLE ROLLER- GENUINE RHP - AAU1365GEN

This is a mini or moke double row bearing for the mainshaft (pinion end). This is the RHP brand. The retaining clip that goes around the outside (in the groove) is ADU4992.