Minisport

MINI & MOKE CABLE OR SWITCH MOUNTING PLATE. - AUE8989

This is a univeral cable or switch mounting plate. This could be used for a choke cable, heater cable, electric switch, washer pump and I am sure the list goes on.

MINI & MOKE ACCELERATOR CABLE NYLON SLEEVED EXTRA LONG - C-AHT85

C-AHT85- MINI & MOKE ACCELERATOR CABLE NYLON SLEEVED EXTRA LONG

This Heavy duty throttle cable is superior in many ways. A nylon interior ensures smooth operation. The outer cable is 32mm longer and inner is 95mm (longer than the standard one). Cable to carb bolt is ACC5062

Mini Accelerator cable RHD 1275 CARB MODEL 1990 ON (rover) - SBB10099

SBB10099- ACCELERATOR CABLE RHD 1275 CARB MODEL 1990 ON

From 1990 on with the introduction of the 1275cc engine the throttle cables fitted/located by way of a white plastic shroud. This is the right hand drive version except for injection cars.

Mini Sinlge point injection accelerator cable RHD/1275cc - SBB10187

SBB10187- ACCELERATOR CABLE RHD SINGLE POINT INJECTION ONLY (ROVER)

From 1990 on with the introduction of the 1275cc engine the throttle cables fitted/located by way of a white plastic shroud. This is the right hand drive version for single point injection cars only

Mini accelerator cable (twin point type) 1990 on R/H/D - SBB103400

SBB103400- ACCELERATOR CABLE TWIN POINT MINI R/H/D

From 1990 on with the introduction of the 1275cc engine the throttle cables fitted/located by way of a white plastic shroud. This is the right hand drive version for twin point injection cars only .

MINI & MOKE ACCELERATOR CABLE RETAINING CLIP - NAM6923

NAM6923- MINI & MOKE ACCELERATOR CABLE RETAINING CLIP

This clip fits on the pedal to help retain the throttle cable- It was obsolete but the spring on the carb end keeps it from sliding out anyway. Probably just a security feature at the time.

MINI & MOKE CARBURETTOR LEVER PIN - ACC5062KIT

ACC5062KIT- MINI & MOKE CARBURETTOR LEVER PIN (INCLUDE NUTS/WASHERS & PIN)

This is the accelerator cable nipple, it holds the inner cable onto the butterfly bracket, fits all single and twin setups.

MINI & MOKE 'T' BAR CHOKE CABLE - AYA2180

As fitted to Leyland minis and mokes (also fitted to other models as an after market replacement). These are a great replacement choke cable. They did say the word 'choke' on them, but we have found that the writing just rubs off!

MINI MK1 CHOKE CABLE EARLY SAYS "CHOKE" ONLY- NON GENUINE - 21A1202MS

21A1202MS- MINI CHOKE CABLE EARLY SAYS "CHOKE" ONLY- NON GENUINE

Non-genuine version of the choke cable fitted to the early minis which does not lock into place like the twin carb version.(see 21A1204).

This was the original type of choke cable fitted to the early minis and does not lock into place like the twin carb version(see 21A1204). It was made to work with the single HS2 carb and had only the word "CHOKE" on it in recessed white paint. The grommet in the body for this cable to pass through is CAM5969 if hole is 11/32"

MINI MK1 CHOKE CABLE EARLY SAYS "CHOKE" ONLY- GENUINE - 21A1202

21A1202- CHOKE CABLE EARLY TYPE MINI - SAYS "CHOKE" ONLY

This was the original type of choke cable fitted to the early minis and does not lock into place like the twin carb version(see 21A1204). It was made to work with the single HS2 carb and had only the word "CHOKE" on it in recessed white paint. The grommet in the body for this cable to pass through is CAM5969 if hole is 11/32"

MINI MK1 CHOKE CABLE- SAYS "CHOKE"&"LOCK"- NON GENUINE - 21A1204MS

21A1204MS- MINI MK1 CHOKE CABLE- SAYS "CHOKE"&"LOCK"- NON GENUINE

Non-genuine original type as fitted to the twin carb version Coopers and "S", with CHOKE AND LOCK written on it in recessed white paint. This Non-genuine part uses a plastic end as opposed to the Bakelite type end on the genuine original version.

MKI Cooper & Cooper S Minis share the same design choke cable with the word "CHOKE" or "CHOKE and LOCK" on it. See 21A1202 for single type HS2 carb with just the word CHOKE. If yours no longer locks on or the cable end is hopelessly frayed replace it when you can. The grommet in the body for this cable to pass through is CAM5969 if the hole is 11/32"

MINI MK1 CHOKE CABLE- SAYS "CHOKE"&"LOCK"-GENUINE - 21A1204

21A1204- CHOKE CABLE EARLY COOPER - SAYS "CHOKE" AND "LOCK"

Authentic original type as fitted to the twin carb version Coopers and "S", with CHOKE AND LOCK written on it in recessed white paint. 

MINI MK2> CHOKE CABLE RUBBER TYPE PULL & TWIST UP TO 1987 - 21A2329

21A2329- CHOKE CABLE RUBBER TYPE PULL & TWIST

Choke cable up to 1987. Pull & twist to lock. The grommet in the body for this cable to pass through is CAM5969

MINI & MOKE CHOKE CABLE TRUNNION ACH9042 NIPPLE & 53K3503 SCREW - AUE34

This is the screw that holds the inner choke cable to the choke mechanism, fits ALL SU carbies (twin & single type)

MINI MK1 HEATER VALVE CONTROL CABLE- NON GENUINE - 14A9988MS

Non-Genuine original type cable with black knob and the word 'Heater' embossed with white lettering as fitted to early Minis and Coopers before the introduction of the plastic safety feature type cables. This is the Non-Genuine version which uses a plastic end as opposed to the Bakelite end of the original part.