Minisport

4 SYNCHRO PARTS & BEARINGS- PRE A+ (Up to 1979) with 14MM Nose Mainshaft

Pricing:
Sort by:

MINI & MOKE FIRST GEAR 4 SYNCHRO (ALL MODELS) - 22G1096

22G1096- MINI & MOKE FIRST GEAR 4 SYNCHRO (ALL MODELS)

Every 4 synchro gearbox had a straight cut first gear as standard. This one has 31 teeth and beware complete straight cut race gears sets use a 29 different tooth count.

$177.27
($124.94 USD ) In stock

MINI & MOKE 2ND GEAR- 4 SYNCHRO PRE A+ (26 TEETH) - 22G1094

22G1094- MINI & MOKE 2nd GEAR- 4 SYNCHRO- PRE A+ (26 TEETH)

2nd gear- 4 synchro- Pre A Plus-26 teeth. This is the second gear as used in the pre A+, 4 sync gearbox (14mm mainshaft). Now available NEW! This gear has been unavailable for many years. They are one of the weakest gears in the mini & moke gearbox.

$222.73 $159.09
($112.12 USD ) In stock

Mini lay gear, suit 4 sync cooper S gearbox - 22G1040

22G1040

One of the Mini gearboxes most sought after is the late 4 synchro remote box that has close ratio gears. The most certain identification is done be inspecting the laygear. If it is a 22G1040 laygear you have a close ratio box. While you are inspecting the laygear be sure to check the inner surface of the laygear which serves as the outer race of the layshaft bearings. This surface can breakdown resulting in premature failure of both the bearing and the shaft. Suits all syncro, non A plus gearboxes.

$450.00
($317.15 USD ) In stock

GEAR KIT 22G1371/22G1040 ONLY TO CONVERT TO "S" CLOSE RATIO BOX - C-AJJ4032

C-AJJ4032- GEAR KIT 22G1371/22G1040 ONLY TO CONVERT TO "S"/GT CLOSE RATIO BOX *LIMITED STOCK*

This gearset is the 22G1371 input and the 22G1040 layshaft will turn your gearbox into a close ratio S/GT gearbox.

$540.91
($381.22 USD ) In stock

Gear-set, 4 synchromesh, straight-cut, close-ratio. For remote gearboxes - C-AJJ4014

C-AJJ4014- GEAR SET 4 SYNCHRO CLOSE RATIO STRAIGHT CUT REMOTE

Original Abingdon ST gear ratios manufactured by using the very latest gear cutting techniques, equipment and top line manufacture it has been possible for us to market a superior close ratio, straight cut gear set with molly coated baulk ring cone surfaces. The gear set includes first, second, third gears, lay gear, first motion shaft & a reverse gear. All our speed gears are manufactured using original Rover power train tooling.

   

$1086.36 $904.55
($637.50 USD ) In stock

Gear-set, 4 Synchromesh, straight cut, close ratio. For Rod change gearboxes - C-STN76

C-STN76- ROD CHANGE GEAR SET PRE A PLUS ROD CHANGE 4 SYNCRO S/C

This straight cut gear kit includes 1ST, 2nd, 3rd gear, 1st motion shaft, reverse gear and laygear. The original ratio and tooth counts used by ST Abingdon competition department. This is a gearbox kit to fit 'rod change' Leyland/rover gearboxes.

$1086.36
($765.64 USD ) In stock

MINI & MOKE MAINSHAFT 4 SYNCHRO- PRE A+ - 22G833

22G833- MINI & MOKE MAINSHAFT EARLY 4 SYNCHRO- PRE A+ 

4-synchromesh mainshaft for gearbox transmission with 14MM nose (13.97MM) 0.550". This is Pre A plus. 

$268.18
($189.01 USD ) In stock

MINI & MOKE MAINSHAFT NUT (PRE A+) 14MM SHAFT END - 22G48

22G48- MINI & MOKE MAINSHAFT NUT (PRE A+) 14mm shaft end

Used on all mainshafts with 14mm shaft end for the 1st motion shaft---when they went to the 18mm shaft on A plus gearboxes they used DAM7485 which is metric thread.

$18.14
($12.78 USD ) In stock

Mini Gearbox pinion locktab - DAM6140

DAM6140- PINION LOCKTAB

Gearbox differential pinion locktab to secure it on the mainshaft for all manual gearboxes

$4.05 $3.59
($2.53 USD ) In stock

Mini Locktab for 1st motion shaft - DAM4000

DAM4000- LOCKTAB 1st MOTION SHAFT

locktab for holding the broach gear to the 1st motion shaft

$4.55
($3.20 USD ) In stock

Mini Locktab (Pair) for double row bearing housing - DAM2377

DAM2377- LOCKTAB MAIN DOUBLE ROW BEARING HOUSING IN GEARBOX (pair)

The housing to retain the double row gearbox bearing has 4 bolt holes but the casing itself might only have 3 drilled holes where they deleted the suspect due to cracking hole on powerfull engines.

$12.64
($8.91 USD ) In stock

Mini rodchange (75 on) gearchange detent ball - BLS110

BLS110- Mini rodchange detent ball

This is the ball that goes under your right hand side plate on the diff housing, sits behind the spring. Holds a spring tension on your gearchange. If this is missing it will jump out of gear.

$2.27
($1.60 USD ) In stock

Mini Gearbox, complete locktab kit - DAM6140/4000/2377/ATA7385

DAM6140/4000/2377/ATA7385- Mini Gearbox locktab kit

This is every locktab you should need when overhauling your gearbox

$36.32 $31.82
($22.42 USD ) In stock

MINI 1ST/2ND SELECTOR FORK- REMOTE TYPE (NOT ROD CHANGE) - 22G889MS

22G889MS- MINI 1ST/2ND SELECTOR FORK- REMOTE TYPE (NOT ROD CHANGE)

made in a brass looking type of material these 1st/2nd gear change forks are prone to wear. This one is for the 4 synchro pre rod change gaerbox onl

$162.73 $144.55
($101.87 USD )

OUT OF STOCK

MINI & MOKE 1ST/2ND SELECTOR FORK- ROD CHANGE TYPE (NOT REMOTE) - TSP100390

TSP100390- SELECTOR FORK 1ST/2ND GEAR SELECTOR FORK ROD CHANGE

The shift fork in all gearboxes are designed to take a lot of abuse. They have to cradle a gear spinning at high RPM while forcing it into the next position. As the gears have to made of very hard steel, the shift fork must be soft enough not to damage the gear and yet take the abuse.

$159.09
($112.12 USD ) In stock