Minisport

Boot lids, badges, liners, panels & parts

Pricing:
Sort by:

MINI BOOT LID SEAL- ON CAR TYPE (1988 to 2000) - CKE10018

CKE10018- MINI BOOT LID SEAL- ON CAR TYPE (1988 to 2000)

This is the boot seal that actually fits on the car body which saved drilling holes in the bootlid. Fitted from about 1988 on.

$36.32
($25.43 USD ) In stock

Mini rover number plate lamp housing 'metal' - 8B12501METAL

8B12501METAL- NUMBER PLATE LAMP HOUSING IN CHROME - ROVER 'MK3' ON

Owing to their position on the car and chrome on metal these must be cleaned weekly .They are a direct replacement for MK3 on original number plate lamps and are less the 2 light lens, which are the same fitting for this lamp. There are 3 types of this housing on the market but this one is the best quality and has the best chrome finish of them all, hence slightly more expensive.

$36.32
($25.43 USD )

OUT OF STOCK

Rover number plate light globe holder - PRC1230A

PRC1230A- NUMBER PLATE LAMP LENS FOR ROVER

Two of these plastic lens that hold festoon bulbs (GLB239) are mounted in the metal cast number plate housing (13H6900) on all ROVER bootlids from 1970on

$11.77
($8.24 USD ) In stock

Mini Rover numberplate lamp seal (numberplate to boot lid) - 13H6010

13H6010- Mini Rover numberplate lamp seal (numberplate to boot lid)

This is the seal that goes between the number plate light and the boot lid on rover model cars. The number plate light is located ABOVE the number plate on these boot lids.

$12.68
($8.88 USD ) In stock

MINI BOOTLID HINGES CHROME PLATED PAIR - 8B12601

8B12601- MINI BOOTLID HINGES CHROME PLATED PAIR

Chrome boot hinges to suit your mini, stand out from the crowd!

$45.41
($31.79 USD ) In stock

MINI BOOTLID HINGES NON GENUINE BARE METAL - (PAIR) - 8B12602

8B12602- BOOTLID HINGES BARE METAL - (PAIR)

A set of boot hinges which does fit and is of decent quality and these are from the same castings as the chromed type but bare for paint application.

$49.95
($34.98 USD ) In stock

MINI BOOT HINGE SCREW (1/4" UNF) WITH DOMED HEAD - SG604051

SG604051- BOOT HINGE SCREW (1/4" UNF) WITH DOMED HEAD

These screws fit the lower 2 holes on all boot hinges. Also see 24A2175/6 gaskets that you will need. 1/4" unf 5/8"long, also for tailgate stays on pickup.

$3.00
($2.10 USD ) In stock

Mini boot lid upper gasket (on boot lid) *SOLD SINGLE* - 24A2175

24A2175- Mini boot lid gasket upper (on boot lid)

Mini boot lid gasket upper (on boot lid)- 2 required per car

$2.50
($1.75 USD ) In stock

Mini boot lid gasket lower (on car) *SOLD SINGLE* - 24A2176

24A2176- Mini boot lid gasket lower (on car)

Mini boot lid gasket lower (on car)- 2 required per car

$2.50
($1.75 USD ) In stock

MINI BOOT LID GASKET SET - 24A2175/24A2176

BOOT LID GASKET SET.

 This is the full gasket set you will need when you put your bootlid back on your car, the gaskets stop any scratches from occurring and also stops the rust that will occur without the fitment of these.

$9.09
($6.37 USD ) In stock

Door and boot lid gasket set - BMP134&5/24A2175/24A2176

This is the full gasket set you will need when you put your doors and boot lid back on your car, the gaskets stop any scratches from occurring and also stops the rust that will occur without the fitment of these.

$29.09
($20.37 USD ) In stock

MINI BOOT LID CABLES/WIRES- PAIR - 14A6740 X2

14A6740- MINI BOOT LID CABLES/WIRES- PAIR

These two simple cables are all that keep the boot lid from crashing down, damaging hinges, bumper and paint. Always replace both to be sure of the same length.

$20.00
($14.00 USD ) In stock

BOOT CABLE COVER / FRONT DISC / RADIUS ARM SHROUD SCREW/ SCREW FOR BOOT LID WIRES - SE910161

SE910161- BOOT CABLE COVER / FRONT DISC / RADIUS ARM SHROUD SCREW/ SCREW FOR BOOT LID WIRES

This screw is used to hold together the 2 halves of the disc shields on all mini front discs. Also used to retain the boot lid cable to the bootlid.

$0.91
($0.64 USD ) In stock

MINI BOOT LID LINER AND SCREW SET - 14A9838

14A9838- MINI BOOT LID LINER AND SCREW SET (AS FITTED TO COOPER S)

This liner was found on many deluxe Minis. The black fiberboard is held on by chrome screws and upholstery washers. Put it on any year Mini.

$54.50
($38.16 USD ) In stock

Boot lid liner screw (and cup washer) also used on door trims- SOLD SINGLE - SCREW & WASHER

Consumables- Bood lid liner screw (and collar)

This is a boot board/door trim screw and cup collar washer to fit your mini, Sold single as a screw and collar

$2.05
($1.43 USD ) In stock