Minisport

Front panels

This section is from the front seam moulding to the very front of the car.

Pricing:
Sort by:

MINI MK1/2 ROUND NOSE BONNET HINGE- L/H - 14A7247

This is the Left hand bonnet hinge to suit the Australian Mk1 & 2 round nose cars. These are Genuine heritage parts. Please note these will not fit the Leyland/Clubman 

$72.68
($54.30 USD ) In stock

MINI BONNET SAFETY CATCH HOOK- ALL MODELS - 14A366

This is the hook part with a spring and spacer only. This fits all Minis and Clubmans as the bracket it attaches to is on all bonnets unless broken.

$36.32
($27.14 USD ) In stock

MINI BONNET SAFETY CATCH HOOK KIT - 14A366KIT

This is the hook, pin, spring, spacer, clevis pin & replacement panel. This fits all round nose Minis. The spring loaded catch is designed to keep the bonnet from blowing open while driving should the latch either fail or not close completely. The catch is simply pinned to the bracket that is part of the bonnet located on the right front corner.

$63.59
($47.51 USD ) In stock

MINI Mk1 & Mk2 ROUND NOSE BONNET - 24A1182

24A1182- MINI BONNET ASSEMBLY MK1 (HINGES MOUNT 6" INBOARD)

The NEW MKI bonnets from Original tooling are now available They are being made from the original tooling and absolutely correct. The exact contours, hinge location, etc. etc. Fits all '59 thru to '71 models of the Mini. Extra freight/packaging will be required to protect it

$631.82 $540.91
($404.14 USD ) In stock

MINI 'ROVER' MK3 ON BONNET ASSEMBLY- NON GENUINE - MSL2

MSL2- MINI MK3 ON BONNET ASSEMBLY- NON GENUINE

MINI MK3 ON BONNET ASSEMBLY- NON GENUINE PART. This bonnet will fit Mk3, even earlier pre 1970 models as it has dual hinge positions. Early cars had a gap of 23" between hinges and later had 34" gap.

$359.09
($268.30 USD )
OUT OF STOCK (21/12/2020) CALL TO ORDER

MINI ROVER BONNET MOULDING PLATFORM- MK3 ON WARDS - MS3

Mini bonnet moulding platform (for MK3 on wards grill upper chrome part). The MK3 rover uk cars has a 3pce grille surround, this platform allows you to fit the upper part of the grille surround to the bonnet.

$30.00
($22.41 USD ) In stock

MINI MK1/2 NON GENUINE FRONT FENDER/GUARD FOR ROUND NOSE- R/H - MS1R

MS1R- FRONT R/H WING FRONT MK1/2

Aftermarket wings do the job at a fraction of the cost of the originals. This right front wing for the Mini will fit all MKI, II, III & IV. A slight difference exits between the early and the later models as to headlamp mounting holes. These repro wings are the MKI/II version but can be used on all models with no modifications. No ariel hole or wing side repeater hole

*Extra postage WILL be required as this is an exceptionally large object and will have to be freighted via TNT/startrack*

$177.27
($132.45 USD ) In stock

MINI MK1/2 HERITAGE FRONT FENDER/GUARD FOR ROUND NOSE- R/H - 14A7240

14A7240 -R/H  

The Heritage produced front wings (fenders) for the Mini are the original with correct round hole for headlamp! They fit!

*Extra postage cost may be required as this is an exceptionally large object and will have to be freighted via TNT*

$226.36
($169.13 USD ) In stock

MINI MK1/2 NON GENUINE FRONT FENDER/GUARD FOR ROUND NOSE- L/H - MS1L

MS1L- FRONT L/H WING FRONT MK1/2

Aftermarket wings do the job at a fraction of the cost of the originals. This right front wing for the Mini will fit all MKI, II, III & IV. A slight difference exits between the early and the later models as to headlamp mounting holes. These repro wings are the MKI/II version but can be used on all models with no modifications. No ariel hole or wing side repeater hole

*Extra postage cost may be required as this is an exceptionally large object and will have to be freighted via TNT/STARTRACK*

$177.27
($132.45 USD ) In stock

MINI MK1/2 HERITAGE FRONT FENDER/GUARD FOR ROUND NOSE- L/H - 14A7241

14A7241 -L/H  

The Heritage produced front wings (fenders) for the Mini have the correct headlamp round hole. They fit!

*Extra postage cost may be required as this is an exceptionally large object and will have to be freighted via TNT*

$226.36
($169.13 USD )
OUT OF STOCK (20/10/2021) CALL TO ORDER

MINI MK1/2 ROUND NOSE INNER WING/FLITCH PANEL- R/H - 14A7900

14A7900- Mini MK1/2 roundnose inner wing and flitch panel- R/H

For roundnose minis with external hinges this is a full inner front wing with the wheel arch panel. The panel is what that the outer A panels for the hinges attach to. This is the right hand panel made by Heritage but 100% perfect in cosmetic finish. *EXTRA FREIGHT REQUIRED*

$359.09
($268.30 USD ) In stock

MINI INNER WING R/H MK1 MINI 18.5" deep - 14A8390

Inner wing R/H from Damper bracket mounting points forward MK1 except Clubman. 1959-69 it has no air hole in side-see CZH3064 for later type with hose hole. NON genuine panel. 

$163.59
($122.23 USD ) In stock

MINI MK1/2 ROUND NOSE INNER WING/FLITCH PANEL- L/H - 14A7901

14A7901- Mini MK1/2 roundnose inner wing and flitch panel- L/H

For roundnose minis with external hinges this is a full inner front wing with the wheel arch panel. The panel is what that the outer A panels for the hinges attach to. This is the left hand panel wing with radiator vent slats but not the rad shroud panel which is available as 14A6498 (made by Heritage, 100% perfect in cosmetic finish.) *EXTRA FREIGHT REQUIRED*

$359.09
($268.30 USD )

OUT OF STOCK (26/05/2021) CALL TO ORDER

MINI L/H INNER WING- INTERNAL HINGE TYPE - ALA6475

This inner wing has the grille slats for the radiator cooling. This is for the UK (NOT AUSTRALIAN) imported UK cars. From MK3 cars with internal hinges & full piece wind up window doors until 1991 when it changed to a large round hole for the cooling fan. 

$322.73
($241.13 USD ) In stock

MINI R/H INNER WING- INTERNAL HINGE TYPE - ABD36006

This Right hand inner wing section only for MK3 cars with 3 air vent holes. One with 4 bolt holes, one with 4 castellated bolt holes (nuts welded in place) and one large trunk hose hole at front. This is for the UK (NOT AUSTRALIAN) imported UK cars with wind up window doors.

$404.55
($302.26 USD ) In stock