Minisport

Centre & floor panels

This section is from the front seam moulding to rear seam moulding where the rear meets the side of the car.

Pricing:
Sort by:

MINI SEDAN- FRONT TO REAR FLOOR PAN- R/H SIDE - FS006R

FS006R- FLOORPAN FRONT TO REAR R/H PRE ROD CHANGE

Floor pan front to rear for the right hand side only to the floor shape before rod change cars---ideal for MK1/2 restoration (no hydro lines)

$222.73
($167.02 USD ) In stock

MINI SEDAN- FRONT TO REAR FLOOR PAN- L/H SIDE - FS006L

FS006L- FLOORPAN FRONT TO REAR L/H PRE ROD CHANGE

Floor pan front to rear for the Left hand side only to the floor shape before rod change cars---ideal for MK1/2 restoration (no hydro lines)

$222.73
($167.02 USD )

OUT OF STOCK (26/08/2021) CALL TO ORDER

MINI FULL FLOOR PANEL WITH CROSS MEMBER, SILLS & TOE BOARD MK1&2 - 24A2615

24A2615- MINI FULL FLOOR PANEL WITH CROSS MEMBER, SILLS & HEEL BOARD MK1&2

Complete non genuine floor pan assemby with crossmember, 2x sill's, heel board. This floor is 4 vent sill with round tunnel only for the remote type gear change vehicles only *EXTRA SHIPPING WILL APPLY*

$1813.64 $1722.73
($1291.81 USD )

OUT OF STOCK (26/08/2020) CALL TO ORDER

MINI REAR FLOOR PAN (EARLY TYPE) RIGHT HAND - MS26R

MS26R- FLOOR PAN REAR R/H PRESHAPED

You can spend hours cutting out rust and patching holes, but why bother? These reproduction floor pans extend the full width with vertical flanges for easy installation, and fairly well represent the original stamping.

$81.77
($61.32 USD ) In stock

MINI REAR FLOOR PAN (EARLY TYPE) LEFT HAND - MS26L

MS26L- FLOOR PAN REAR L/H PRESHAPED

You can spend hours cutting out rust and patching holes, but why bother? These reproduction floor pans extend the full width with vertical flanges for easy installation, and fairly well represent the original stamping.

$81.77
($61.32 USD ) In stock

MINI ROVER REAR FLOOR PAN- RIGHT HAND- (1992 ONWARDS) - MSL26R

MSL26R- MINI ROVER REAR FLOOR PAN- RIGHT HAND- (1992 ONWARDS) 

Rear R/H floorpan for ROVER 1992 on cars with cuved shape for tunnel. 

$81.77
($61.32 USD )

COMING SOON

MINI ROVER REAR FLOOR PAN- LEFT HAND- (1992 ONWARDS) - MSL26L

MSL26L- MINI ROVER REAR FLOOR PAN- LEFT HAND- (1992 ONWARDS) 

Rear L/H floorpan for ROVER 1992 on cars with cuved shape for tunnel. 

$81.77
($61.32 USD )

COMING SOON

MINI SEAT MOUNTING CROSSMEMBER - 14A9533

Mini seat mounting cross member- Fits round tunnel cars. Approximate location of the vertical, forward wall is 17.5 - 17.75 inches back from the crease in the floor where the floor bends upward under the pedals. The forward wall lines up just forward of the front portion of the external jacking point in the sill.

$204.55
($153.38 USD ) In stock

HANDBRAKE LEVER MOUNTING BRACKET TWIN CABLE TYPE MK1/2/3 - 14A6669

14A6669- HANDBRAKE LEVER MOUNTING BRACKET TWIN CABLE TYPE MK1/2/3

This bracket is the main mounting bracket for the handbrake lever assembly and is welded onto the back of the seat crossmember and to the rear floor section

$27.23
($20.42 USD ) In stock

MINI BRACKET REAR SEAT TO FLOOR STRENGTHENER - 14A6624

14A6624- MINI BRACKET REAR SEAT TO FLOOR STRENGTHENER

Bracket from the centre of the transmission tunnel up to the centre of the back seat pan.

$27.23
($20.42 USD )

OUT OF STOCK (03/08/2021) CALL TO ORDER

MINI SUBFRAME MOUNTING REAR PANEL SALOON PRE 1990 - MS51

MS51 –MINI SUBFRAME MOUNTING REAR PANEL SALOON PRE 1990

Non Genuine pre 1991 true shape subframe mounting panel. Most people fit the genuine panel HMP441008 which had a slight modification carried out in 1991 for fuel lines on the SPI but if you want original shape for and fit for Mk1/2/3 this is the only other panel available. This is a true good fitting panel.

$159.09
($119.30 USD ) In stock

MINI SUB FRAME MOUNTING REAR PANEL WITH LOCATION POINTS - HMP441008

HMP441008- MINI SUB FRAME MOUNTING REAR PANEL WITH LOCATION POINTS

This is the horizontal panel under the rear seat area that has the location points and castellated nuts for the front of the rear subframe fixings which often rusts. Fits all saloons and Clubmans but for Clubman estates and vans with wooden load floor but the van with metal load floor and pickup is taller at 21cm(8.25") high- See MS52VAN

This is the true shape as fitted from 1991 and will fit earler cars. Customers have used this panel or the half panels without problems but measure up before cutting out too much metal.

$204.55
($153.38 USD ) In stock

Mini L/H rear pocket/companion box (with Inertia seat belt bracket) - ADO360030

ADO360030- Mini L/H rear pocket/companion box (with Inertia seat belt bracket)

Genuine rear luggage pocket but the later shape without ash tray but a mounting recess point for inertia seat belt,this is the L/H side 

$222.73
($167.02 USD ) In stock

Mini R/H rear pocket/companion box (with Inertia seat belt bracket) - ADO360020

ADO360020- Mini R/H rear pocket/companion box (with Inertia seat belt bracket)

Genuine rear luggage pocket but the later shape without ash tray but a mounting recess point for inertia seat belt,this is the offside R/H side 

$222.73
($167.02 USD ) In stock

MINI COMPANION BIN CLOSING PLATE R/H - 14A8994

Closing plate against the bodyside in the base of the R/H rear companion/glove box now has a square pressing hole for later models.

$63.59
($47.68 USD ) In stock