Minisport

Body Seals and rubber

 

Pricing:
Sort by:

MINI BOOT LID SEAL- EARLY TYPE (REQUIRES 26 x 14A6585) - 14A6584

14A6584- Mini boot lid seal (fits on boot lid)

Bootlid seal for Mini <91. Held in place on the boot lid using 26 clips(part# 14A6585).When fitting, the lip part of the seal open end for clips should face the inner boot catch- (the open end of the seal facing inwards to the bootlid all the way round.

$36.32
($28.32 USD ) In stock

MINI BOOT LID SEAL CLIP- SOLD SINGLE- 26 REQUIRED - 14A6585

14A6585- BOOT LID SEAL CLIP 26 REQUIRED

Used on all MK1/2/3 bootlids where there are 26 little holes drilled around the inner edge.

These are for use with 14A6585 seal

$1.17
($0.91 USD ) In stock

MINI BOOT LID SEAL- ON CAR TYPE (1988 to 2000) - CKE10018

CKE10018- MINI BOOT LID SEAL- ON CAR TYPE (1988 to 2000)

This is the boot seal that actually fits on the car body which saved drilling holes in the bootlid. Fitted from about 1988 on.

$36.32
($28.32 USD ) In stock

MINI SEDAN RUBBER KIT- SUIT DELUXE/COOPER S & MINI K - KIT03

This is a rubber kit to fit morris mini Mk1 & Mk2 sedans with windup windows (Does not suit 850/Cooper slide window cars  or the leyalnd- both these kits are available). This is the cheapest way to buy rubber and will save you money when buying these individual. Open the advert to see exactly what you get.

$678.55 $613.64
($478.51 USD ) In stock

MINI SEDAN RUBBER KIT- SUIT LEYLAND - KIT06

This is a rubber kit to fit Leyland/Clubman sedans with windup windows (Does not suit 850/Cooper slide window cars or morris mini Mk1 & Mk2- both these kits are available). This is the cheapest way to buy rubber and will save you money when buying these individual. Open the advert to see exactly what you get.

$680.27 $613.64
($478.51 USD ) In stock

MINI SEDAN RUBBER KIT- SUIT 850/COOPER WITH SLIDE WINDOWS - KIT05

KIT05- Mini 850 Rubber kit

This is almost ALL rubbers you should require for your 850/cooper project. (see item description for full item list)

$540.91
($421.79 USD ) In stock

MINI VAN RUBBER KIT- SUIT WINDUP WINDOW - KIT04

Mini Van complete rubber kit

This is almost everything you should need to restore a mini van, we have left the side windows (rear) out as they are not on all models, they are available in our store...See item description for an itemized list of what is in the kit.

$668.18
($521.04 USD ) In stock

MINI DOOR SEAL FOR AUSTRALIAN WINDUP WINDOW CARS (NOT SLIDE TYPE) - HYE111

This door seal is for the Australian windup window door, the Australian door had the quarter window fitted. This will not suit the slide window or later UK model door seal. SOLD SINGLE.

$36.32
($28.32 USD ) In stock

Mini early 850/cooper door seal - XGA9934

XGA9934- Mini Sliding window door seal 1960-66

Genuine triangular door aperture rubber for cooper or 850 to enable doors to close properly. SOLD SINGLE

$32.68
($25.48 USD ) In stock

Mini 'Rover' door seal with drain holes - CGA2835MS

CGA2835MS- ROVER DOOR SURROUND SEAL 'MK3 WITH WIND UP WINDOWS TO 1996'

Genuine, correct length with cut outs and drain holes in the correct places. The MK3 door seal is notable because of it's large 'bulb' area.

$31.82
($24.81 USD ) In stock

MINI REAR OPENING QUARTER LIGHT SEAL, ORIGINAL MK1 PROFILE TYPE - ALA5897

ALA5897- SEAL ORIGINAL MK1 PROFILE TYPE, REAR OPENING 1/4 window

The MKI Mini not only has a smaller rear side quarter window than the MK1 (slide window) but also the rubber seal is cosmetically different. The only seal available for years was the MK1.5-2 (windup window) which has a grain texture on the inside edge. Now in stock are very good reproductions of the original MKI shape seals

$31.77
($24.78 USD ) In stock

MINI REAR SIDE WINDOW RUBBER- LATE MK1/MK2 AUSTRALIAN CARS (WILL FIT ALL AUST CARS) - PAM1017

PAM1018- MINI REAR SIDE WINDOW RUBBER- LATE MK1/MK2 AUSTRALIAN CARS 

Rear flipper window rubbers as fitted to the later Mk1/Mk2 & Clubman range of Australian minis. Will fit all Aussie cars from 1959-1978

$34.09
($26.58 USD ) In stock

MINI (ROVER) SEAL FOR REAR OPENING QUARTER LIGHT (UK MK3 ONWARDS) - EAM7724

EAM7724- MINI (ROVER) SEAL FOR REAR OPENING QUARTER LIGHT (UK MK3 ONWARDS)

Quarter window seals for non-piano hinge type pop out rear side windows as fitted to Mk3. Plenty of imported copies on the market but this is our true UK copy of the original as made by Standard Products for Rover. Two required per car. NOT USED ON AUSTRALIAN CARS.

$40.00
($31.19 USD ) In stock

MINI (ROVER) SEAL REAR QUARTER LIGHT FIXED, NOT SIDED - JRC2673

JRC2673- MINI (ROVER) SEAL REAR QUARTER LIGHT FIXED, NOT SIDED

Not every Mini has hinged rear quarter windows (rear side windows). This is the seal for the ones that don't open. The original rubber is prone to being very baked by the sun and thus dry out and crack. NOT USED ON AUSTRALIAN CARS.

$31.82
($24.81 USD ) In stock

MINI & VAN PETROL TANK NECK SEAL - 14A7057

14A7057- MINI & VAN PETROL TANK NECK SEAL

The seal that goes on the neck of petrol tanks as a protection against rust and also to make the hole look neater so replace them when they crack or shrink through heat. This is the original fatter type as used pre 1997.

$10.86
($8.47 USD ) In stock