Minisport

Ignition

This is the heartbeat of your car, and nine times out of ten it needs a pace maker... :-) We are seeing huge sales in electronic ignition setups as a more reliable way of ensuring your car does not let you down, this is not however the only area that special attention should be given, think also about coil/leads/wiring. Give us a call if you need any further help, we would love to chat.

Pricing:
Sort by:

DISTRIBUTOR CAP SIDE ENTRY FOR 45D TYPE - GDC142

A favourite for specials where room is at a premium and easy access is required for 45D type distributors only--uses GRA2128 rotor arm and obviously discard screws from cap and use existing distributor clips to secure.

$50.00
($38.86 USD )

OUT OF STOCK (07/08/2020) CALL TO ORDER

ROTOR ARM FOR GDC412 - GRA2128

Rotor arm for special fitment cap GDC142

$18.14
($14.10 USD ) In stock

MINI DISTRIBUTOR CAP ELECTRONIC IGNITION- SCREW ON - GDC156

This was the first mini distributor cap to have screws hold the cap to the body from about 1990 on, when electonic ignition was introduced. Fits all 1992 onwards injection cars up until 1997.

$22.68
($17.63 USD ) In stock

MINI & MOKE VACUUM PIPE ELBOW - 12B2062

12B2062 - MINI & MOKE VACUUM PIPE ELBOW

The stock vacuum advance distributor is connected to the carb/manifold by a small rubber joint that in turn is mated to metal line that fits the distributor. If the little rubber connector is deteriorated it could allow a vacuum leak at the carb and stop the advance from working properly. The rubber connector has a 90 degree bend. When in doubt, replace it.

$5.41
($4.20 USD ) In stock

MINI & MOKE CONNECTOR FOR ADVANCE RETARD VACUUM PIPE - 12B2095

12B2095 - MINI & MOKE CONNECTOR FOR ADVANCE RETARD VACUUM PIPE

Straight rubber connector pipe. The standard vacuum advance distributor is connected to the carb/manifold by a small rubber joint that in turn is mated to metal line that fits the distributor. If the little rubber connector is deteriorated it could allow a vacuum leak at the carb and stop the advance from working properly. The angled rubber connector is 12B2062. When in doubt replace it.

$9.05
($7.03 USD ) In stock

MINI & MOKE VACUUM PIPE WITH CONNECTORS - 37H4229M

37H4229M - VACUUM PIPE WITH CONNECTORS

Thin plastic pipe with rubber connectors either end-This replaces the old metal type which also had a vacuum chamber built into the line, that was made obsolete. This hose is 26"(660mm)long and has 2 rubber ends,one staright and one at a right angle

$11.77
($9.15 USD ) In stock

MINI VACUUM ADVANCE UNIT- 25D - 37H3840MS

For those very early 25D type distributors. This version for modern fuels as fitted to our distributor range with slide on vaccum hose inlet pipe-not the very first screw in type.

$54.50
($42.36 USD ) In stock

MINI & MOKE VACUUM ADVANCE UNIT- 45D & 59D - 37H8414

37H8414- DISTRIBUTOR VACUUM UNIT 45/59D 54425067

Fitted from 1974 on for 45D/59D distributors

$54.50
($42.36 USD ) In stock

MINI & MOKE- BRAND NEW DISTRIBUTOR 45D TYPE- POINTS. NOT 1275 - ETC5835

ETC5835- Mini 'points' dissy (new) with vac advance

This distributor is brand new, it will fit into any A series engine and is normally cheaper than getting your old distributor overhauled, includes, dissy, vac advance, new points, new condensor, new rotor button and a new cap! Great Value! This distributor is a replacement for 850/998/1100- we really suggest the ALDON range for 1275 engines as the advance curves are better suited.

$104.55
($81.26 USD ) In stock

MINI 23D4 DISTRIBUTOR (POINTS TYPE)- NON VAC 'S' TYPE - 12G2140

12G2140- Mini 23D distributor (early type)- Non vac 'S' type

Cooper"S" 23D distributor, no vac unit-This is NOT THE ORIGINAL LUCAS ITEM as the original company and tooling no longer exist but is a new copy of the 40819. It does have an original type baseplate with a post but NOT the 32ounce contact set as per the original 40819 distributor, but as many people may make the improvement to contactless ignition this is the perfect looking copy.See 12G2140MS for Negative earth only electronic type.

$145.41
($113.02 USD ) In stock

MINI & MOKE TELESCOPIC INSPECTION MIRROR (FOR SETTING TIMING) - RST207

This is a mirror on a telescopic stick- This is a MUST when setting the timing on your mini or your moke due to the angle of the inspection hole in the clutch cover. 3 year warranty.

$12.68
($9.86 USD ) In stock

MINI 25D4 DISTRIBUTOR- ELECTRONIC- VAC ADVANCE- SIDE ENTRY - AEOW25D4

AEOW25D4- MINI 25D4 DISTRIBUTOR- ELECTRONIC- VAC ADVANCE- SIDE ENTRY

This distributor is a vacuum advance electronic distributor. Normally fitted to Early minis & deluxe models with the Vacuum advance setup & side entry cap. Will fit any A series car.

 

$177.27
($137.79 USD ) In stock

MINI MK1 COOPER S 23D4 DISTRIBUTOR- ELECTRONIC- MECHANICAL ADVANCE- SIDE ENTRY - AEOW23D4/12G2140MS

This distributor is a vacuum advance electronic distributor. Normally fitted to 1275 MK1 cooper S models with mechanical  advance setup & side entry cap. Will fit any A series car.

$177.27
($137.79 USD ) In stock

MINI & MOKE 43D4 DISTRIBUTOR- ELECTRONIC- MECHANICAL ADVANCE - AEOW43D4

This distributor is a mechanical advance electronic distributor. Normally fitted to later Leyland mini's & mokes (from 1976 to 1982) when they used the mechanical weights instead of the vacuum advance setup. Will fit any A series car.

$177.27
($137.79 USD ) In stock

MINI & MOKE 45D4 DISTRIBUTOR- ELECTRONIC- VAC ADVANCE - AEOW45D4

This distributor is a vacuum advance electronic distributor. Normally fitted to Leyland mini's & mokes with the Vacuum advance setup. Will fit any A series car.

$177.27
($137.79 USD ) In stock