This was the first mini distributor cap to have screws hold the cap to the body from about 1990 on, when electonic ignition was introduced. Therefore there is no points or condenser but the rotor...

This is the Distributor cap for the 'round shoulder' 29D distributor. Alternate part number 46920 (intermotor), VK276IB(Beru)

If you have an early 123 electronic distributor this is the replacement cap. For later 123 distributors please see part number GDC123. Rotor arm is GRA123. If you are unsure if you have an early or...

If you have a new 123 ELECTRONIC distributor this is the replacement cap. For earlier 123 distributors please see part number GDC123E. Rotor arm is GRA123. If you are unsure if you have an early...

17H5106- SCREW KIT FOR 23 / 25D DISTRIBUTORS SET These are the screws needed to fix the condenser, points and base plate to 23/25D distributors. See 57H5135 for 45D type distributors. 

57H5135- SCREW KIT FOR 45D DISTRIBUTORS These are the screws needed to fix the condensor, points, base plate and vacuum to 45D distributors. For 23/25D type see 17H5106. 

Cooper"S" 23D distributor, no vac unit-This is NOT THE ORIGINAL LUCAS ITEM as the original company and tooling no longer exist but is a new copy of the 40819. It does have an original type...

This distributor is a mechanical advance electronic distributor. Normally fitted to 1275 MK1 cooper S models with mechanical  advance setup & side entry cap. Will fit any A series car. Supplier notes: "These units are factory tested....

[12G2140MS] NEGATIVE EARTH ONLY. Cooper"S" 23D distributor, no vac unit-This is NOT THE ORIGINAL LUCAS ITEM but a new contact less electric copy of 40819. Fitted with the better Red rotor arm upgrade. Cheaper than many...

This distributor is a vacuum advance electronic distributor. Normally fitted to Early minis & deluxe models with the Vacuum advance setup & side entry cap. Will fit any A series car. Supplier notes: "These units...

This distributor is a mechanical advance electronic distributor. Normally fitted to later Leyland mini's & mokes (from 1976 to 1982) when they used the mechanical weights instead of the vacuum advance setup. Will fit any...

This distributor is brand new, it will fit into any A series engine and is normally cheaper than getting your old distributor overhauled, includes, dissy, vac advance, new points, new condenser, new rotor button and a...

This distributor is a vacuum advance electronic distributor. Normally fitted to Leyland mini's & mokes with the Vacuum advance setup. Will fit any A series car.

ALDON 100AY YELLOW to suit the PRE A PLUS engine. We use these on all of our 1275 engine builds with final advance curves altered on the dyno! This is a non-vacuum distributor, to suit most tuned...

This distributor is for Pre A Plus race or High performance engines and may be fitted with either red or blue type points so beware when ordering LU143/4 ignition kits. For 1275 the Aldon range is...

A+ performance Aldon red distributor! These performance distributors are A Plus engines (has the fork type distributor clamp). These have the best curves for 1275 and are only really the performance distributor for A plus 1275's.

A+ performance Aldon yellow distributor! These performance distributors are A Plus engines (has the fork type distributor clamp). These have the best curves for 1275 and are only really the performance distributor for A plus 1275's.

This distributor is a electronic distributor to suit the A+ engines only- mechanical advance- not vacuum advance. Normally fitted to imported or VERY late engines, this will fit any A+ mini's & mokes. Will fit...