Mini Spares copy of the RAC/ Scottish works type-For serious off-road and rough stages, the only type to fit is the rounded sledge type front version, which helps ride the car over potentially damaging foreign...

[C-GRH003BLACK] The top hose is 7" long for the clubman 998/1100 and also fits the original MK1 radiator where the outlet tube on the radiator was on the very end. All new radiators have this outlet now...

[C-GRH001RED] For people that want performance hoses but don't want the coloured hose set! Red silicon cooling hose set, made for small bore engines. Comes with, top HOSE to suit small bore, bottom hose and two 1.1m...

[C-GRH001BLACK] For people that want performance hoses but don't want the coloured hose set! Black silicon cooling hose set, made for small bore engines. Comes with, top HOSE to suit small bore, bottom hose and two...

[C-GRH002BLACK] For people that want performance hoses but don't want the coloured hose set! Black silicon cooling hose set, made for 1275 comes with, top 1275cc HOSE, bottom hose and two 1.1m heater hoses.

[C-GRH002RED] Red silicon cooling hose set for the round nose mini, This is made for 1275 comes with, top 1275cc HOSE, bottom hose and two heater hoses. C-GRH004RED for 1275 GT red hose set C-GRH001RED for small...

There are several advantages inherent to an Aluminum Cylinder Head including a significant weight savings (5.85kg with valves and springs vs 14.1kg) and considerably improved cooling due to aluminum being able to disperse heat much...

General spec and design is the same as C-AJJ3387 but has a 45/45 ramp type giving drive on acceleration and deceleration, preferred by many rally drivers for forest type rallies. However, for tarmac/airfields the 45/90...

[C-AHT446EVO] Roller-tip rocker assembly developed by MED. 1.5 Hi-Lift for 1275cc big bore engines only. Cradle type with larger upgraded shaft size to improve rigidity.Ensure tightening down all posts equally to eliminate stress fractures on shaft.The...

[Moving old stock] BIG Bore, manifold of choice for the racers. This is the biggest you can get; it is really used for 1400cc engines where long duration cams over 305 are used. Collector outlet...

[C-AHT289] Large bore LCB for competition use or on very large bore street engines; such as 1400cc+. Y-piece outlet end is 2" outside diameter, 1.875"id.The best quality production exhaust manifold available from Minispares. The Long Center...

Ultra light (3.87kg - 8.53lbs) EN8 steel billet race flywheel for diaphragm clutch {NOT-Verto} with ring gear for non-pre-engaged starter. Forged is more rigid at high speed.The latest refinement of the Ultra-light Mini flywheel is...

[C-ARA4444] The ultimate in cooling, the 4 core is probably the best, suit (998-1380) that you want to run cool, a 1275 will really appreciate this. This is too thick for a round nose morris/cooper S...

Especially for more powerful and hotter running engines. Developed using the latest technology and design for increasing air flow, utilizing just two rows of very large cores and V shaped gills, thinner than the 4...

This really will only suit an 850cc engine- even then you don't want to live in a hot climate. You might get away with it in a standard 998. For all 998, 1098 & 1275...

The NEW MKI bonnets from Original tooling are now available They are being made from the original tooling and absolutely correct. The exact contours, hinge location, etc. etc. Fits all '59 thru to '71 models...

Mini boot handle, this is the same on all Morris & Leyland Minis, this also has the longer shaft so it can be also used on Mini van rear doors., comes as shown with new...

[TOOL33] Radius arm bearing removal, fitting and reaming tool fitted with a pilot to keep the reamer in line with the needle roller bearing. Full instructions supplied