Minisport

Driveline

Pricing:
Sort by:

MINI & MOKE CV BOOT KIT- DISC & DRUM TYPE - 18G9027MS

One gaiter, 2 plastic clips and grease. This type is made to fit either type of CV joint and sold as a kit per hub. 2 required per car. This is the budget CV boot, we highly recommend the heavy duty CV boots as we find these ones almost paper thin in some places.

$12.68
($8.67 USD ) In stock

MINI & MOKE CV BOOT- HEAVY DUTY- DRUM TYPE - 18G9027DB

Mini & Moke drum brake CV boot, (boot only). This is the HEAVY DUTY thick rubber type boot.

$18.14
($12.40 USD ) In stock

MINI & MOKE CV BOOT- HEAVY DUTY- DISC TYPE - 18G9027CS

Mini & Moke disc brake CV boot, (boot only). This is the HEAVY DUTY thick rubber type boot.

$18.14
($12.40 USD )
OUT OF STOCK (20/06/2022) CALL TO ORDER

MINI & MOKE C.V. JOINT- DRUM BRAKE TYPE - GCV1105

GCV1105- Mini & Moke drum brake CV joint kit

C.V. joint to suit any drum brake mini or moke! This C.V. joint comes with,   C.V. (drum), C.V boot Clips for securing boot to C.V and driveshaft

$72.68
($49.68 USD ) In stock

MINI & MOKE C.V. JOINT- DISC BRAKE TYPE (HEAVY DUTY) - GCV1013

Premium Heavy duty CV joint for a 7.5" or 8.4" disc brake mini, a must when that clicking noise around the corner really starts to drive you mad. (includes CV nut, boot and driveshaft clip). Made in Europe. Please note the 7.0" cooper (not S) uses the drum brake CV joint.

$81.77
($55.89 USD ) In stock

Mini drum brake & 7" cooper CV washer - 2A7323

Front hub nut washer for drum brakes and 997/998 cooper (7")

Front hub nut washer for 21A79 nut which only fits vehicles with smaller CV joint such as all non disc minis.

$7.23
($4.94 USD ) In stock

Mini drum brake & 7" cooper CV nut (1-1/8") castellated - 21A79

21A79- Mini drum brake & 7" cooper CV nut (1-1/8") castellated 

Front hub nut that screws onto the CV joint of all early minis with drum brakes plus all standard cooper 997/8 models. 1 1/8", 1.125" AF nut size although 28mm width have been seen. the washer for this is 2A7323

$9.95
($6.80 USD ) In stock

MINI & MOKE POT JOINT GAITER KIT- NON GENUINE - BHM7205

BHM7205- MINI & MOKE POT JOINT GAITER KIT- NON GENUINE

This is a boot kit for the inner c/v joint (plunge) on Leyland minis or where ever plunge joints have been fitted- It gives you the grease pack and the cable ties.

$12.68
($8.67 USD ) In stock

MINI & MOKE POT JOINT GAITER KIT- GENUINE - GSV1073

This is a boot kit for the inner CV joint (plunge/pot) on leyland & rover minis or where ever plunge joints have been fitted- It gives you the grease pack and the boot. GENUINE MG ROVER

$27.18
($18.58 USD ) In stock

MINI & MOKE POT JOINT INBOARD CV JOINT - NON GENUINE - GCV1102MS

GCV1102MS- MINI & MOKE POT JOINT INBOARD CV JOINT - NON GENUINE

These are the best on the market where clip grooves are in the correct place to save the driveshaft seizing on. Later model Minis have CVs on both ends of the axle; this is the in board joint that extends from the differential.

$72.68
($49.68 USD ) In stock

CV JOINT STAINLESS STEEL CABLE TIE- 150MM - CABLETIE150

Stainless steel cable tie- 150mm. These work exactly the same as the plastic ones but are by far stronger and longer lasting than the plastic ones. We use the CV banding tool and the CV straps in our workshop or home shed.

$1.77
($1.21 USD ) In stock

CV JOINT STAINLESS STEEL CABLE TIE- 300MM - CABLETIE300

Stainless steel cable tie- 300mm. These work exactly the same as the plastic ones but are by far stronger and longer lasting than the plastic ones. We use the CV banding tool and the CV straps in our workshop or home shed.

$2.23
($1.52 USD ) In stock

CV CLAMP BANDING TOOL & CUTTER - TOOL95

TOOL95- CV CLAMP BANDING TOOL & CUTTER

This is the flat band type CV clip banding tool & cutter- Easy to use & gives you a perfect job everytime. A must when owingin a mini or moke.

$30.00
($20.50 USD ) In stock

CV CLAMP BANDING TOOL & CUTTER- HEAVY DUTY TYPE - TOOL94

This is the heavy duty flat band type CV clip banding tool & cutter- Easy to use & gives you a perfect job everytime. A must when owning a mini or moke. This heavy duty one is for workshop type use. 

$50.00
($34.17 USD ) In stock

PAIR OF STAINLESS STEEL CV BOOT CLAMPS- NEEDS TOOL95 - CVBC-01

PAIR OF STAINLESS STEEL CV BOOT CLAMPS- NEEDS TOOL

This is a pair of universal stainless steel clamps that suit our mini & moke CV & pot joints. You will need the banding tool  (TOOL95).

$4.50 $3.59
($2.45 USD ) In stock