Minisport

Engine breathing/PCV parts

Pricing:
Sort by:

MINI & MOKE CRANKCASE BREATHER FILTER ASSEMBLY- 1/2" HOLE - 62-1013

Universal crank case breather with red top, with a 13mm (1/2") neck size, not K&N but a very high quality crankcase breather. Will fit the mini or moke.

$20.00
($14.67 USD ) In stock

MINI & MOKE ENGINE BREATHER- FORWARD TYPE - LLC10047

LLC10047- MINI CLUTCH HOUSING BREATHER, 

The breather can that goes on top of the clutch housing, '89 on, to clear servo.. Will also fit all earlier models

$63.59
($46.64 USD ) In stock

MINI & MOKE ENGINE BREATHER- ALLOY TYPE WITH REMOVABLE PARTS - BREATHER001

The breather can that goes on top of the clutch housing, it is a polished alloy version. It comes with a circlip that can be removed on the top it, this allows the gauze to be able to be replaced or the top changed from 12mm to 16mm to suit your application.

$136.32
($99.98 USD ) In stock

MINI & MOKE ENGINE BREATHER EARLY TYPE- STAINLESS STEEL TYPE - SMB175

SMB175- MINI & MOKE ENGINE BREATHER EARLY TYPE- STAINLESS STEEL TYPE

This is a stainless steel version of the original engine breather (upright) type. This fits on the clutch housing & you will need to have the threads and the hole in the housing- This can be done if you have the landing to suit.

$177.27
($130.02 USD ) In stock

MINI PCV TOP CLIP (HOLDS THE TOP ON THE PCV VALVE) - 27H7760

27H7760- Positive Crankcase Ventilation valve top clip

This is the clip that holds the top on your PCV valve, it is very important to have as without it your PCV is useless.

$9.05
($6.63 USD ) In stock

MINI PCV VALVE SPRING (INSIDE PCV) - 27H7756

27H7756- MINI PCV VALVE SPRING (INSIDE PCV)

This is the spring that goes inside your PCV valve, it is very important to have as without it your PCV is useless.

$9.05
($6.63 USD ) In stock

MINI PCV (EMISSION VALVE) RUBBER DIAPHRAGM FOR 13H5191 - 27H7758

27H7758- RUBBER DIAPHRAGM FOR PCV

The rubber diaphragm that sits in the exhaust emission valve. known as the PCV on a Cooper S and some variants/It sat on the inlet manifold and a clip holds the top on to where this rubber sits.

$18.14
($13.30 USD ) In stock

MINI PCV VALVE PLUNGER (INSIDE PCV) - 149342

149342- MINI PCV VALVE PLUNGER (INSIDE PCV)

This is the plunger/plate that goes inside your PCV valve, it is very important to have as without it your PCV is useless.

$18.14
($13.30 USD ) In stock

MINI PCV (EMISSION VALVE) COVER PLATE FOR 13H5191 - 27H7759

27H7759- MINI PCV (EMISSION VALVE) COVER PLATE FOR 13H5191

This is the cover plate that is fitted on top of the PCv and held on with the clip. This plate has the original ribs in it but does not have any writing on it.

$13.59
($9.97 USD ) In stock

MINI & MOKE PCV FOR CLOSED CIRCUIT BREATHING (AS USED ON COOPER S) - 13H5191

13H5191- PCV EMMISSION VALVE for closed circuit breathing

This very commonly used device has been very uncommon to find. We now have them! The valve is needed on most nearly all twin carb models such as MG midget, MGB and of course Cooper S models to pass emissions control tests, but a properly operating valve has no adverse effect on performance, but may improve it. The rubber diaphragm is available as 27H7758

$236.32
($173.33 USD ) In stock

MINI PCV VALVE SUPPORT BRACKET - 12G609

12G609- MINI PCV VALVE SUPPORT BRACKET

This is the bracket that holds the PCV onto the original manifold.

$11.77
($8.63 USD ) In stock

MINI & MOKE INLINE SERVO NON RETURN VALVE - 17H2646

17H2646- INLINE SERVO NON RETURN VALVE

HOSE FITTING EITHER END in-line brake servo valve which is essential if you do not have the correct U shape section formed in the servo hose to stop petrol contaminating your servo. Not supplied in any kit it is an important part. If you are looking for the threaded original type of screw in valve see 17H2646ORIGINAL

$40.00
($29.34 USD )

MINI SERVO NON RETURN VALVE- MK1 BOOSTER (21A1293) - 17H2646ORIGINAL

17H2646ORIGINAL- MINI SERVO NON RETURN VALVE- MK1 BOOSTER (21A1293)

Mk1 in-line brake servo valve for 21A1293 servo. It is essential if you do not have the correct U shape section formed in the servo hose to stop petrol contaminating your servo. Not supplied in any kit it is an important part. If you cannot suck through valve non threaded part end it needs to go on manifold and not servo.

$90.91
($66.68 USD )

OUT OF STOCK- UNABLE TO BUY

MINI & MOKE BREATHER HOSE FROM BREATHER TO CARB - 12A1735

Emission hose from carb to breather valve, this hose has special size ends and made of a material to cope with taking these emission gases. Approx 23.75" long with internal 5/16" end and 1/2" other end.

$18.14
($13.30 USD ) In stock