Minisport

Engine head parts & accessories

Pricing:
Sort by:

MINI & MOKE ROCKER SHAFT BUSH - 2A21

Rocker shaft bush to suit all but the latest rockets. Sold individually, Even if you regularly replace the rocker shaft, the rocker bushes will eventually wear. 

$7.50
($5.32 USD ) In stock

MINI & MOKE ROCKER SHAFT- HEAVY DUTY - C-AEG399

This is a direct replacement rocker shaft. Fits all rockers except full needle roller types. Far superior to the stock item! ENSURE YOU ALWAYS TIGHTEN DOWN ALL POSTS EQUALLY to eliminate stress fractures on shaft.

$45.41
($32.21 USD ) In stock

MINI & MOKE ROCKER PILLAR LOCATING SCREW - 2A258

2A258- MINI SCREW FOR LOCATING ROCKER PILLAR

This is the screw that locates the rocker pillar on the shaft

$4.50
($3.19 USD ) In stock

MINI & MOKE ROCKER SHAFT LOCKING PLATE - 2A259

This plate holds the locating screw for the locking pillar.

$4.09
($2.90 USD ) In stock

MINI & MOKE (A SERIES) ROLLER ROCKER ASSEMBLY 1.3:1 RATIO - MSLMS0483

1.3:1 Mini & Moke roller tip rocker standard assembly for your Mini A series engine. Manufactured in aluminium and stylishly finished in anodised blue. This kit also includes spacer tubes.

$495.45
($351.44 USD ) In stock

MINI & MOKE ROCKER ASSEMBLY 1.5 HI LIFT FORGED ROCKER - C-AHT436

This is a set of 1.5:1 ratio forged rockers to suit your mini or moke. This set are a direct replacement for the standard versions and will give significant gains on 1275cc units. Complete kit includes eight rockers, adjusting screws, four steel pedestals and heavy duty rocker shaft.

$350.00
($248.27 USD ) In stock

MINI & MOKE (A SERIES) ROLLER TIP ROCKER ASSEMBLY 1.5 RATIO FOR 1275 - C-AHT446

This is a set of 1.5:1 ratio Roller-tip rockers to suit your mini or moke. This set are a direct replacement for the standard versions and will give significant gains on 1275cc units. Complete kit includes eight rockers, adjusting screws, four gold anodised posts and heavy duty rocker shaft.

$540.91 $450.00
($319.20 USD ) In stock

MINI & MOKE (A SERIES) ROLLER TIP 1.5 WITH LARGER SHAFT - C-AHT446EVO

This is a set of 1.5:1 Roller-tip rocker assembly. 1.5 Hi-Lift for 1275cc big bore engines only. Craddle type with larger upgraded shaft size to improve rigidity. Ensure tightening down all posts equally to eliminate stress fractures on shaft.

$631.82
($448.17 USD ) In stock

MINI & MOKE (A SERIES) ROCKER SPACER KIT WITH SPACERS AND SHIMS - C-AEG392

C-AEG392- MINI & MOKE (A SERIES) ROCKER SPACER KIT WITH SPACERS AND SHIMS

Spacer kit for correcting rocker alignment. This kit has been produced to help rocker pad and valve stem alignment plus reducing friction. The standard springs can be replaced with this special kit of 3 spacers (2 small and one large) plus a correct amount of shims.

$35.45
($25.15 USD )

OUT OF STOCK (14/10/2020) CALL TO ORDER

REPLACEMENT R/H ROCKER FOR C-AHT446 LESS SCREW - C-AHT447RIGHT

C-AHT447RIGHT- REPLACEMENT R/H ROCKER FOR C-AHT446 LESS SCREW

Single R/H rocker less screw for the C-AHT446 roller rocker set. not sure what side you requre --By holding the rocker the correct way up with the adjuster screw end facing you the rocker will be biased either to the right or the left which denotes the side required

$63.64
($45.14 USD ) In stock

REPLACEMENT L/H ROCKER FOR C-AHT446 LESS SCREW - C-AHT447LEFT

C-AHT447LEFT- REPLACEMENT L/H ROCKER FOR C-AHT446 LESS SCREW

Single L/H rocker less screw for the C-AHT446 roller rocker set. not sure what side you requre --By holding the rocker the correct way up with the adjuster screw end facing you the rocker will be biased either to the right or the left which denotes the side required

$63.64
($45.14 USD ) In stock

MINI & MOKE VALVE GUIDE- CAST IRON *SOLD SINGLE* - 12G1963

This valve guide will suit all mini & moke cylinder heads from a small 850cc to a hot 1380cc. Valve guides should be replaced with every valve job. Sold single- 8 Valves per head. That tell tale puff of blue smoke when you first start is an indicator of worn guides or seals. 

$4.50
($3.19 USD ) In stock

MINI & MOKE VALVE GUIDE- MANGANESE (SET OF 8) - C-AJJ4037

A must for any competition car! Although Silicon bronze valve guides were used for their extremely good wear values, they were very hard and not user friendly when fitting. Were possible we now use the Manganese bronze guides which have good cutting properties.

$86.36
($61.26 USD ) In stock

MINI & MOKE ROCKER INNER STUD- SHORT - 51K1473

This is the inner (short) rocker gear stud as used on the A series engines in our Mini & Mokes. 2 required per engine & sold single. You will also need two of the longer ones 51K885. This one is a 5/16u nc stud with unf end for nut and is 70mm long

$4.32
($3.06 USD ) In stock

MINI & MOKE ROCKER OUTER STUD- LONG - 51K885

This is the outer (long) rocker gear stud as used on the A series engines in our Mini & Mokes. 2 required per engine & sold single. You will also need two of the inner short ones 51K1473. This one is a 5/16 unc stud with unf end for nut and is 80mm long 

$3.59
($2.55 USD ) In stock