Minisport

MINI & MOKE FAN BLADE YELLOW PLASTIC 11 BLADE- NON GENUINE - 12G2129MS

Non genuine 11 blade plastic fan, one of the most efficient fans ever fitted to a Mini. This fan pushes a lot of air with very little noise. If you need more air, then please see part#2A998. This Hot Climate fan pushes even more air but it is substantially louder than the 11 blade version.

MINI & MOKE 11 BLADE YELLOW PLASTIC RADIATOR COOLING FAN - 12G2129

One of the most efficient fans ever fitted to a Mini. This fan pushes a lot of air with very little noise, if you have the white brittle fan we suggest replacing it ASAP. if your fan blades are bent back a bit then we also suggest replacement.

MINI & MOKE 6 FANS IN METAL FOR HOT CLIMATES - 2A998

2A998- MINI & MOKE 6 FANS IN METAL FOR HOT CLIMATES

Known as the 'Hot Climate' or 'Export fan' this metal fan is moves the most air but also absorbs the most power. The 11 blade plastic fan 12G2129 is quieter and is the most efficient in terms of power absorption and air movement. The single 2A997 or 4 blade type is good at higher engine speeds but is noisy and less efficient at lower speeds.

MINI & MOKE 4 BLADE FAN- COMPETITION - 2A997 (X2)

This is two single blades placed together to make a 4 Blade fan. This is a copy of the original special tuning fan blade. They one of the ultimate the best way to increase air movement but they are a bit noisy. Fits mini or moke.

Mini fan spacer (3/16") - 12A312

12A312- FAN SPACER (3/16") actually 5/32 just under 4mm

Used with most of the stock fans, definitely required if you have a breather type timing cover.

Mini fan spacer 11/16" (17MM) thick- alloy - 12G2452_S/HAND

12G2452- Mini fan spacer (11/16"/17MM) thick- alloy

Fan spacer as used on the Leyland/clubman range. It is alloy and 11/16" (17mm) thick. This is a secondhand part as they are mot available new

Mini & Moke water pump pulley (3-7/8" dia) - CAM6239_S/HAND

CAM6239- Mini & Moke water pump pulley (3-7/8" dia)

This is the standard water pump fitted as fitted to our Australian minis (for the most part). This is the tin pulley that is approx 3-7/8" 

MINI WATER PUMP PULLEY, TWIN TYPE FAN & AIR PUMP. - 12G1542_S/HAND

12G1542- MINI WATER PUMP PULLEY, TWIN TYPE FAN & AIR PUMP.

Twin type water pump pulley as fitted to the Clubman/Leyland where the air pump and fan were both driven off the water pump. This is a second hand part

Mini large water pump pulley, keep that car cooler - CAM6408

CAM6408- PULLEY LARGE WATER PUMP

This oversize water pump pulley is stock on late model cars, but will fit all models. Designed to reduce the horsepower drain and slow the water moving thru the radiator to allow it time to cool its very important for the higher RPMs run today. This oversize pulley is 4.750" diameter, older stock is 3.875".

MINI & MOKE FAN BELT- C39 GENERATOR TYPE - 815

MINI & MOKE FAN BELT- GENERATOR TYPE

Belt to drive your C39 generator that uses the smaller generator pulley-.

MINI & MOKE FAN BELT- ALTERNATOR TYPE - 825

MINI & MOKE FAN BELT- ALTERNATOR TYPE

Belt to drive your waterpump/fan and alternator, if running a generator please see 815 or 850 belt type.

MINI ROVER FAN BELT- AIR CON FITTED TYPE - GMB51005

MINI ROVER FAN BELT- AIR CON FITTED TYPE

For those lucky people who have factory fitted air con fitted on their ROVER minis such as Japan models.

MINI ROVER FAN BELT- TWIN POINT INJECTION (1996 ON) - GMB50920

MINI ROVER FAN BELT- TWIN POINT INJECTION (1996 ON)

Latest type grooved fan belt that fits special grooved pulleys on twin point cars only for better life expectancy. 

Mini ROVER small belt for alternator (from A/C compressor) - BELTAY160

BELTAY160- Mini ROVER small belt for alternator (from A/C compressor) 

This is the small belt that runs from the compressor up to the slternator on the airconditioned rover minis- These are hard to find and we have limited stock of 10! Original number: PITWORK AY160-VK23E 

RADIATOR ELECTRIC FAN KIT TAILOR MADE WITH SPECIAL SENDER - C-ARA4401

A must for any tuned road car. A full electric fan kit, designed with precision made brackets to mount directly to the mini radiator to suck air in order to maximise efficiency and cooling. It therefore does not block cold airflow to the radiator.