Gearbox accessories/gearchange
![]() MINI REMOTE GEAR CHANGE SPACER - 88G22888G228- MINI REMOTE GEAR CHANGE SPACER This is the spacer plate the screws onto the top of the remote gearchange. |
$20.00
($15.37 USD †)
In stock
|
![]() MINI REMOTE GEAR CHANGE SPRING - 22G28622G286- MINI REMOTE GEAR CHANGE SPRING This is the spring on the top of the remote gearchange. |
$20.86
($16.04 USD †)
In stock
|
![]() MINI REMOTE GEAR CHANGE RETAINING PLATE - 22G29022G290- MINI REMOTE GEAR CHANGE RETAINING PLATE This is the retaining plate the screws to the top of the remote gearchange. |
$22.68
($17.44 USD †)
In stock
|
![]() MINI REMOTE GEAR CHANGE BUSH (PRE ROD) FOR GEARBOX LINKAGE RODS - 2A35022A3502- REMOTE GEAR CHANGE BUSH (PRE ROD) FOR GEARBOX LINKAGE RODS The bronze bush in the differential housing that the gear change selector rod sits through which should be lightly greased. |
$16.36
($12.58 USD †)
In stock
|
![]() MINI REMOTE GEAR CHANGE KNUCKLE - MALE - 88G22488G224- MINI REMOTE GEAR CHANGE KNUCKLE - MALE Fitted to all mini gearboxes up to the introduction of the Rod change type. This is the male end and fits into the female end 88G223 which is obsolete- on the back of the gearbox. |
$54.50
($41.89 USD †)
In stock
|
![]() MINI REMOTE GEARCHANGE LARGE SIDE PLUG - 22A27122A271- Remote gearchange dust cover (large plug) This the large plug that attaches to the side of the remote gearchange. This plug stops dirt/dust from entering the gearchange. |
$16.32
($12.54 USD †)
In stock
|
![]() MINI & MOKE ROD CHANGE DIFF HOUSING SUPPORT BUSH - 13H728613H7286- MINI & MOKE ROD CHANGE DIFF HOUSING SUPPORT BUSH This bush inserts into the rear of the diff housing, it only suits rod change cars from about 74on (it has two rods instead of the big alloy support gearchange) |
$20.00
($15.37 USD †)
In stock
|
![]() MINI & MOKE ROD CHANGE DUST COVER BOOT - 21A425RC21A425- Mini rodchange dust cover boot (stops dirt getting inside the gearchange unit) This is the boot that stops the dirt/dust from entering the gearchange unit on a rodchange gearchange setup! |
$3.59
($2.76 USD †)
In stock
|
![]() Mini reverse lock out, stops being able to select reverse gear on remote gearboxes - MS71MS71- REVERSE LOCK OUT (GEARLOCK) FOR REMOTE G/BOX (NOT RODCHANGE) Reverse gear lockout for remote type gearlevers to remove possibility of going into reverse in error. |
$36.32
($27.92 USD †)
In stock
|
![]() MINI REMOTE GEAR CHANGE PLUG- HALF MOON - 22A285Fitted in the gearbox remote control this half moon seal butted up against the gearbox remote housing. |
$13.59
($10.45 USD †)
In stock
|
![]() MINI & MOKE GEAR CHANGE AND OR EXHAUST MOUNT- RUBBER - GEX7251GEX7251- GEARCHANGE/EXHAUST MOUNT This mount fits on |
$4.05
($3.11 USD †)
In stock
|
![]() MINI & MOKE GEAR CHANGE AND OR EXHAUST MOUNT- POLY - GEX7251POLYGEX7251POLY- GEARCHANGE/EXHAUST MOUNT- IN POLY This mount fits on Leyland mini/moke gear change and rear exhaust mounts on cooper S/other Mini.- Poly version |
$11.77
($9.05 USD †)
OUT OF STOCK (19/01/2021) CALL TO ORDER
|
![]() Mini 'rover' gearchange mount- rod change - 22G220522G2205- Rover gearchange mount- rod change. This is the oversize cotton reel mounts that were used by rover. 2 required per gearchange |
$9.05
($6.95 USD †)
In stock
|
![]() MINI & MOKE ROD CHANGE YOKE/ROD EYE - 22G2792This little extension rod is quite a light alloy, and they have a tendancy to wear, when these wear the gearchange becomes very sloppy- a good idea to get rid of any slop in your gearchange. Make sure when installing GREAT care is taken when aligning the holes for the roll pins to go through.
|
$90.86
($69.85 USD †)
In stock
|
![]() MINI REMOTE GEARCHANGE MOUNT- LARGE ALLOY GEARCHANGE TYPE - 21A956This is the mount at the very rear of the remote gear change, this mount helps also support the engine movement (This does not suit the 1974on rod change or early 850/wand type). |
$13.59
($10.45 USD †)
In stock
|