Minisport

MINI & MOKE FRONT BRAKE RUBBER HOSE- DRUM TYPE - GBH170

This is a mini or moke front rubber/flex brake hose. This is the longer hose as fitted to drum brake model cars. The nut, washer and copper washer are also available to buy. Normal practise is to replace both hoses at the same time- This will avoid any brake 'pulling'.

MINI & MOKE FRONT BRAKE RUBBER HOSE KIT- DRUM TYPE - GBH170KIT

This is a mini or moke front rubber/flex brake hose kit. This is the longer hose as fitted to drum brake model cars. This kit includes the hose, nut, washer and copper washer. Normal practise is to replace both hoses at the same time- This will avoid any brake 'pulling'.

MINI & MOKE FRONT BRAKE RUBBER HOSE- DISC TYPE - GBH249

This is a mini or moke front rubber/flex brake hose. This is the shorter hose as fitted to disc brake model cars. The nut, washer and copper washer are also available to buy. Normal practise is to replace both hoses at the same time- This will avoid any brake 'pulling'.

MINI & MOKE FRONT BRAKE RUBBER HOSE KIT- DISC TYPE - GBH249KIT

This is a mini or moke front rubber/flex brake hose kit. This is the shorter hose as fitted to disc brake model cars.  This kit includes the hose, nut, washer and copper washer. Normal practise is to replace both hoses at the same time- This will avoid any brake 'pulling'.

MINI & MOKE FRONT BRAKE HOSE & CLUTCH HOSE NUT - 2K8686

One side of this nut is machined flat to go against the subframe body where it holds the brake hose in place. You can use this nut on both front hoses, aswell as the clutch hose (where it bolts onto the body)

MINI & MOKE FRONT BRAKE HOSE & CLUTCH HOSE ANTI RATTLE WASHER. - WE600101

This special shake proof washer should be replaced. Found on front hose. Also used on 21A1524 hydrolastic pipe adaptor

MINI BRAKE HOSE & CLUTCH COPPER WASHER - 233220A

This washer is a must and will fit in four different places, both the brake hoses require these when the hose screws into the caliper or wheel cylinder, these also fit on the fitting for the brake light switch where it attaches to the hose (please note this does not do the upper one) plus the clutch hose to slave cylinder.

MINI & MOKE FRONT BRAKE PIPE FROM Y TO L/H HOSE- 1.2M - HF44

This is the front brake pipe that goes from the Y piece to the top of the left hand brake hose. It is 1.2m long (44inches). Made in approved bundy tube for Australian road rules. Be aware of copper pipe as it may not be legal for road use. This will need to bent to allow transportation.

MINI & MOKE REAR BRAKE HOSE - ALL MODELS - BH211/GBH250

This is a mini or moke rear rubber/flex brake hose. This will fit all models. The nuts & washers are also available to buy. Normal practise is to replace both hoses at the same time- This will avoid any brake 'pulling'.

MINI & MOKE REAR BRAKE HOSE KIT - ALL MODELS - BH211KIT

This is a mini or moke rear rubber/flex brake hose kit. This will fit all models. This kit includes the 2 nuts, 2 washers and the hose. Normal practise is to replace both hoses at the same time- This will avoid any brake 'pulling'.

MINI & MOKE SHAKEPROOF WASHER 3/8" UNF FOR REAR BRAKE HOSES - GHF323

GHF323- MINI & MOKE SHAKEPROOF WASHER 3/8" UNF FOR REAR BRAKE HOSES

Rear brake hose 3/8" Shakeproof washer (4 required per car)- Sold single 

MINI & MOKE REAR BRAKE HOSE NUT (HALF NUT) - NT606041

NT606041- MINI & MOKE NUT FOR REAR BRAKE HOSE (HALF NUT)

A special 3/8" unf half nut (9/16"AF spanner size) for fitting on rear brake hoses. 4 required per car- sold single

MINI & MOKE BRAKE HOSE BRAIDED FRONT- PAIR ONLY - C-AJJ4030

Mini & Moke Pair of front only braided steel hoses. Please be aware these are sided, the deeper threaded hose fits the right hand side, the shallower hose fits the passenger side. These do not fit the dual master 1977on Australian Minis & Mokes as they need 2 shallow hoses.

MINI & MOKE REAR BRAIDED HOSES- PAIR - C-AJJ4031

Pair of rear braided brake hoses- this will suit both the Mini & moke. Sold as a pair.

MINI & MOKE BRAIDED HOSE KIT- SET OF 4 - C-AJJ4026

C-AJJ4026- BRAIDED BRAKE HOSE SET OF 4 (2 FRONT & 2 REAR)- GOODRIDGE BRAND

Set of 4 hoses, 2 front and 2 rear. Braided brake and clutch hoses have a PTFE inner which helps to eliminate the spongy pedal feel under arduous conditions, and give greater efficiency. The outer braided stainless steel cover eliminates wear/damage and corrosio