Minisport

Nuts, caps & accessories

Pricing:
Sort by:

MINI WHEEL NUT FOR 10" STEEL RIMS (ROUNDED SEATING) - 88G322

The original mini wheel nut with a round seating was fitted on all standard 10 inch mini steel rims. sold single' 16 required for a full car. 3/8UNF & a 7/16 spanner fits it.

$4.50
($3.46 USD ) In stock

WHEEL NUT NO 6 CHROME (CURVED SEAT) PRE 84- SUIT MINATOR ETC - CN1

CN1- WHEEL NUT NO 6 CHROME (CURVED SEAT) PRE 84- SUIT MINATOR ETC

Chrome Lug nut. Fit stock 10" & 12" wheels. Also fits Minator and other Mag wheels that take a radius seat type nut.

$3.59
($2.76 USD ) In stock

WHEEL NUT NO5 (TAPERED SEAT) 1984 on - CN2

CN2- WHEEL NUT NO5 (TAPERED SEAT) 1984 on

These chrome wheel nuts have the 60 degree fitting angle on them which was introduced as standard on original production car wheels from 1984 on.

$4.50
($3.46 USD ) In stock

WHEEL NUT & WASHER 6A FOR ORIGINAL MINILITE/WOLFRACE WHEELS - CN3

CN3- WHEEL NUT & WASHER 6A FOR ORIGINAL MINILITE/WOLFRACE WHEELS

Over the years Minilite wheels have been made in different widths and offsets, they all took .625"(15.7mm) diameter lug nuts, but the lengths vary. They are sold "each". This one has a shank length of 11/16"(17mmm)long and will only fit the 5x10 minilite. The 6x10 is usualy much longer. This one has a shank length which is a few mm shorter than the latest type 5x10" minilite wheel, see C-21A1905/6

$6.32
($4.86 USD ) In stock

WHEEL NUT NO 6 LARGE SEAT CHROME (larger CN1 equivalent) - CN4

CN4- WHEEL NUT NO6 LARGE SEAT CHROME (larger CN1 equivalent)

The original stock nut has a very small area of contact to absorb all the loads of cornering, etc. Our special "wide seat" nuts almost double the contact area! The first designs (Bugeye) use a flatter seat than the more common "Rostyle" type. Chrome lug nuts are now available for any option.

$4.50
($3.46 USD ) In stock

WHEEL NUT NO5 LARGE SEAT CHROME 60° TAPER 1984 on - CN5

CN5- WHEEL NUT NO5 LARGE SEAT CHROME 60° TAPER 1984 on 

If your wheels are using a tapered seat style wheel nut you must consider this latest safety option! The original stock nut has a very small area of contact to absorb all the loads of cornering, etc. Our special "wide seat" nuts almost double the contact area!

$4.50 $3.59
($2.76 USD ) In stock

SUPALIGHT WHEEL NUT- 60 DEGREE TAPER- SOLD SINGLE - WHLNUT60

WHLNUT60- SUPALIGHT WHEEL NUT- 60 DEGREE TAPER- SOLD SINGLE

This is a wheel nut to suit a SUPALIGHT rim. They will fit any rim with a 60 degree taper. small head (standard mini size).

$3.59
($2.76 USD ) In stock

MINI WHEEL NUT TO SUIT JELLY BEAN/SLOT/KIDNEY RIM (SET OF 16) - MAG NUTS SLOT (X16)

This mag nut is made to suit the 'Jellybean style of wheel, the diameter of the shank is 17mm and the length of the thread is 20mm. Sold as a set of 16 only (this is the only way we can buy these). 

$68.18
($52.41 USD )

OUT OF STOCK (31/03/2021) CALL TO ORDER

CONTESSA MAG WHEEL NUT- SOLD SINGLE - HYL6604

This is the wheel nut to suit the contessa range of rims made by R.O.H. The contessa was also named a contesta. These are 3/8 UNF threaded nuts to suit the mini & moke wheel studs. These are sold single & 16 are required for a complete set of rims. Open up the advert for more images with a digital caliper.

$6.32 $5.41
($4.16 USD ) In stock

CONTESSA MAG WHEEL NUT WASHER- SOLD SINGLE - CONTESSA WASHER

CONTESSA WASHER- CONTESSA MAG WASHER/INSERT (SOLD SINGLE)

This is the washer that sits inside the R.O.H named contessa/contesta rim. Many times the washers almost look part of the rims, however they are removable and sometimes need replacing. Sold single

$2.68
($2.06 USD ) In stock

WHEEL NUT FOR ROVER COOPER AND SPORTSPACK ALLOY WHEELS - NAM9075

Wheel Nut for Genuine Rover Cooper 8 spoke and MPI Sportspack wheel. Price is for one wheel nut. You must use a 6 sided 11/16" socket and not a multi sided socket to avoid damaging the wheel nut. Original nuts from the factory use 11/16" socket.

$6.32
($4.86 USD ) In stock

REVOLUTION AND MAMBA WHEEL NUT IN CHROME (NOT 13") - REV09C

This chrome wheel nut is for original Mamba and Revolution wheels (except 13"-see REV10) Sold single nut and washer. Shank length is 32.51mm. Shank diameter is 13.58mm.

$11.77 $4.50
($3.46 USD ) In stock

REVOLUTION AND MAMBA WHEEL NUT IN STAINLESS STEEL (NOT 13") - REV09

This stainless steel wheel nut for original Mamba and Revolution wheels (except 13"-see REV10) Sold single nut and washer. Shank length is 31.4mm. Shank diameter is 13.90mm.

$11.77
($9.05 USD ) In stock

REVOLUTION WHEEL NUT (ONLY 13X6) NOT RFX - REV10

This chrome wheel nut is for the original 13" Revolution except RFX wheel. This nut is 16.99mm shaft diameter, 34.39mm shaft length

$5.41
($4.16 USD ) In stock

MINI WHEEL NUT FOR MINILIFE WHEEL INCLUDES WASHER- STAINLESS - C-21A1969

C-21A1969- MINI WHEEL NUT FOR MINILIFE WHEEL INCLUDES WASHER- STAINLESS

Stainless steel sleeve nut with tapered wasgher (washer is not stainless) 5/8" SHANK DIAMETER 15.1mm wide and 16mm long shaft. Sold individually as fitted to the Minilife range of wheels 

$8.14
($6.25 USD ) In stock