Minisport

Rear Suspension

Pricing:
Sort by:

MINI & MOKE GREASE NIPPLE- BALL JOINT & REAR TRAILING ARMS - LN10051

Always check these grease nipples on your front hubs are working as they are very important. These two swivel pin grease nipples are the same, upper and lower. Also used on the rear radius arms

$4.00
($3.07 USD ) In stock

7/16" UNF NUT- NYLOC TYPE - GFK3224

7/16" UNF NYLOC NUT (11/16" spanner fits on it) fine thread. This nut has a few applications on a mini & mokes, (Front castor arms, rear subframe).

$0.86
($0.66 USD ) In stock

MINI & MOKE THICK FLAT WASHER FOR TIE BAR (SOLD SINGLE - 2 PER CAR)) - PWZ207

This is the thick flat washer that sits against the cup washer (2A4328) that stops the tie bar from pulling out of the subframe. As fitted to the front of the mini or moke.

$2.68
($2.06 USD ) In stock

MINI & MOKE SUSPENSION KNUCKLE/BALL & CUP JOINT - 21A1163/GSV1118MS

These joints are complete with the knuckle, nylon cup (21A423) and rubber boot (21A425). If your suspension has dropped suddenly, or you have loud squeeking noise during suspension movement, then these knuckles are one of the first things you should check. If left unchecked, the knuckle can wear through the nylon cup, into the suspension arm, and ruin the casting that supports the knuckle joint. SEE GSV1118EVO for upgraded joint.

$10.91
($8.39 USD ) In stock

MINI & MOKE SUSPENSION KNUCKLE JOINT WITH POLY BOOT GAITER - GSV1118EVO

These UK made Nuckle joints complete joint with the following specifications, correct dimensions and shape of pin and ball in EN24T,using correct spec grease, genuine original shape cup using correct material (21A423MS) upgraded poly boot (21A425EVO) all to help against wear and detrimental fitting. Even genuine Rover products are no longer the original or up to our high standard required.

$15.91
($12.23 USD ) In stock

MINI & MOKE SUSPENSION KNUCKLE/BALL & CUP JOINT- GENUINE - GSV1118

GSV1118- SUSPENSION KNUCKLE JOINT GENUINE (TOP QUALITY)

Genuine OE knuckle joint. These joints are complete with the knuckle, nylon cup(21A423) and rubber boot(21A425). If your suspension has dropped suddenly, or you have loud squeeking noise during suspension movement, then these knuckles are one of the first things you should check.

$31.77
($24.42 USD ) In stock

Mini & Moke packing washer for suspension ball & cup - 21A1845

21A1845- Mini & moke packing washer for ball & cup

This is a unique washer, if placed inbetween the ball and cup and the suspension trumpet it will slightly raise the height of your car.

$4.50
($3.46 USD ) In stock

MINI & MOKE SUSPENSION KNUCKLE JOINT GAITER PLUS SOME TIE ROD ENDS - 21A425

21A425- SUSPENSION KNUCKLE JOINT GAITER PLUS SOME TRACK ROD ENDS

This is the rubber gaiter that fits the suspension knuckles (ball and cup) they also fit many aftermarket and some old genuine track rod ends.

 Rover and Unipart changed designs and suppliers many times so we cannot advise on fitment. See also 21A423MS for nylon cup only.

$3.59
($2.76 USD ) In stock

MINI & MOKE SUSPENSION KNUCKLE JOINT GAITER PLUS SOME TIE ROD ENDS- POLY UPGRADE - 21A425EVO

21A425EVO- MINI & MOKE SUSPENSION KNUCKLE JOINT GAITER PLUS SOME TIE ROD ENDS- POLY UPGRADE

Polyurethane upgraded gaiter for all knuckle joints and many track rod ends. For standard rubber versions  see 21A425.

$5.00
($3.84 USD ) In stock

MINI & MOKE SUSPENSION KNUCKLE JOINT NYLON CUP ONLY - 21A423

21A423- SUSPENSION KNUCKLE JOINT NYLON CUP ONLY

If your ball is ok and you just want to replace the cup then this is all you need.

$5.41
($4.16 USD ) In stock

MINI & MOKE SEAL DUST EXCLUDER RADIUS/UPPER ARM - 2A7327

2A7327-SEAL DUST EXCLUDER RADIUS/UPPER ARM

Round rubber seal which acts as a dust/debris excluder on the rear radius arm and front upper arms

$1.82
($1.40 USD ) In stock

MINI REAR TRAILING/RADIUS ARM REPAIR KIT - GSV1125

GSV1125- Rear Trailing Arm Kit

Rear trailing arm repair kit for MINI's, this kit has all you will need to replace a bent trailing arm/or worn out trailing arm. these have the bush and roller bearing type (not like the moke which has two bearings)

*Please note that new bush (supplied) in trailing arm will require reaming out after installation.

$45.41 $36.32
($27.92 USD ) In stock

MINI & MOKE TOP ARM & RADIUS ARM THRUST WASHER (THIN TYPE) - 2A7324

2A7324- MINI & MOKE TOP ARM & RADIUS ARM THRUST WASHER (THIN TYPE)

Washer on the outer rear radius arm pin and also on the front upper arm shaft and is 3.8mm wide.33.1mm (1.305") diameter. Other end of rear radius arm is ACA9302. Other end of the front arm shaft is a larger 7.4mm wide washer which is 2A4326.

$5.41
($4.16 USD ) In stock

MINI REAR TRAILING/RADIUS ARM SUPPORT PIN ONLY - ACA9099

ACA9099- MINI REAR TRAILING/RADIUS ARM SUPPORT PIN ONLY
 
This is the rear trailing arm support pin only.

$18.14
($13.94 USD ) In stock

MOKE REAR TRAILING/RADIUS ARM REPAIR KIT - GSV1125+ATJ4098

This is the rear trailing arm kit to suit a moke. It is the same kit as the mini however it includes 2X ATJ4098 bearings unlike the mini kit that uses 1x ATJ4098 bearing and a 2A7325 bronze bush. One kit will do one rear trailing arm (2 rear trailing arms on a car).

$54.50 $50.82
($39.06 USD ) In stock