MINI ROVER WINDOW DROP GLASS RUBBER SEAL TO REGULATOR FRAME - 24A948

24A948- MINI ROVER WINDOW DROP GLASS RUBBER SEAL TO REGULATOR FRAME

The rubber that sits in the frame to hold the windows on wind up window type doors. The frames are ALA5746/7 or see MSSK2105 also used on ROVER Clubman Estate and Traveller rear windows in the finger pull grips. Sold individually.2 per door but Order number required.

MINI 'ROVER' R/H DOOR LOCK ASSEMBLY/DISC - CZH3528

CZH3528- MINI 'ROVER' R/H DOOR LOCK ASSEMBLY/DISC

ROVER MINI FULL WINDUP window type doors this is the R/H lock mechanism mounted on the door, mini saloon and UK clubmans only from 1970 and not some early Wolseley Hornets. This lock is for the internal hinge door type minis. This will NOT fit the Australian cars- These ONLY fit the ROVER minis.

MINI 'ROVER' L/H DOOR LOCK ASSEMBLY/DISC - CZH3529

CZH3529- MINI 'ROVER' L/H DOOR LOCK ASSEMBLY/DISC

ROVER MINI FULL WINDUP window type doors this is the L/H lock mechanism mounted on the door, mini saloon and UK clubmans only from 1970 and not some early Wolseley Hornets. This lock is for the internal hinge door type minis. This will NOT fit the Australian cars- These ONLY fit the ROVER minis.

MINI 'ROVER' DOOR STRIKER MK 3>. - CZH627

CZH627- MINI 'ROVER' DOOR STRIKER MK 3.

ROVER MINI FULL WINDUP window type doors door lock striker plate located on the B post of all wind up window minis. For the UK (internal hinge) rover minis only.

ROVER LOCK PLINTH- CHROME-PAIR - CZH611CHROME

MINI ROVER DOOR LOCK PLINTH BLACK PLASTIC (LEFT OR RIGHT) - CZH611PA

CZH611PA- MINI ROVER DOOR LOCK PLINTH BLACK PLASTIC (LEFT OR RIGHT)

The square/oblong plastic finisher that goes on the door where the safety lock is located on Mk3 1970 on cars with wind up windows.

Mini rover chrome bezel (larger than Mk1/2 cooper S) *ROVER* - ALA6640

ALA6640- Mini rover chrome switch bezel (larger than Mk1/2 cooper S) *ROVER*

Mini rover chrome switch bezel (larger than Mk1/2 cooper S) *THIS IS MADE FOR THE LARGER ROVER SWITCH PANEL*

Mini rover R/H outer door moulding with weather strip - PAM1014

PAM1014- DOOR MOULDING OUTER WITH SEAL R/H

The R/H outer bright work trim with the seal attached to stop water seeping down into the door frame, on all cars with wind up windows from about 1980 on, these are the later type with the black protection ends fitted as a safety requirement on new cars.

Mini rover L/H outer door moulding with weather strip - PAM1015

PAM1015- DOOR MOULDING OUTER WITH SEAL L/H

The L/H outer bright work trim with the seal attached to stop water seeping down into the door frame, on all cars with wind up windows from about 1980 on, these are the later type with the black protection ends fitted as a safety requirement on new cars. 

Mini rover outer door moulding clip- sold single (4-5 req per side) - ADH3809

ADH3809- MINI ROVER OUTER DOOR WEATHER STRIP CLIP (4-5 req per door)

Rover MINI outer door weather strip clip (single) also used for 24A169 glove box moulding MK1/2

Mini rover inner door moulding with weather strip - EJU10003

EJU10003- ROVER DOOR MOULDING INNER WITH SEAL (L/H & R/H)

This is the 1/2" tall thinner type fitted to wind up window cars from 1970 on.

The original 1" taller type had the felt draught excluder stapled on but when rusty they would scratch the door glass so it was replaced on the assembly line by the later rubber moulded version type without staples.

Mini rover inner door moulding clip- sold single (4-5 req per side) - EYC10048

EYC10048- ROVER TRIM CLIP FOR INNER STAINLESS/RUBBER DOOR MOULDING

Trim clip for fitting the stainless/rubber window moulding (EJU10003) on to the door. Sold individually.

Mini rover door check strap (Mk3) - ADA5671

ADA5671- DOOR CHECK STRAP MK III ONWARDS

DOOR CHECK STRAP, MK3 (USE WITH RETAINING PIN CLZ412)

MINI ROVER CHECK ARM RUBBER GROMMET- R/H - CZH4052

CZH4052- MINI ROVER CHECK ARM RUBBER GROMMET- R/H

Moulded shape type left hand door stay grommet fitted until 1985 when it was replaced by a flat sponge type seal CGE10038/9

MINI ROVER CHECK ARM RUBBER GROMMET- L/H - CZH4053

CZH4053- MINI ROVER CHECK ARM RUBBER GROMMET- L/H

Moulded shape type left hand door stay grommet fitted until 1985 when it was replaced by a flat sponge type seal CGE10038/9