Sensors, switches & gauges

Temp sensor for Australian cars - GTR104

GTR104/52710- Mini temp sensor

This is a temp sensor that will do ALL models, the probe (part that goes into the head) is 9.45mm, there is another one (earlier) that is 8.60mm if you have the smaller one the hole in the head may need to be opened up to suit.

$18.14 $13.59

($9.78 USD †) In stock

Mini rover temp transmitter, with plastic end (1992-96) - GTR307

GTR307- TRANSMITTER TEMPERATURE WITH PLASTIC END FOR 1992 -96 SPI

Fitted to 1275cc cylinder heads from 1992 until 1996 SPI this transmitter is denoted by its large plastic end.

$45.41

($32.67 USD †) In stock

Mini rover 92on fan switch for radiator - C-ARA4445

Mini 'Rover' Radiator 92on fan switch for 2 or 4 core radiators.

The original factory radiators had a seal to hold the switch in but on our special 2 core and 4 core radiators we used this screw in type switch for extra safety. Switching temperatures: On @ 92° and off @ 82°

$45.41

($32.67 USD †) In stock

Replacement electric fan thermo switch Included in C-ARA4400 - KLM1416

KLM1416- FAN CONTROLLER

Replacement thermal transmitter switch for the ELECTRIC fan kit C-ARA4400

$86.36

($62.14 USD †) In stock

Electric temp guage (smiths) - 13H4460

13H4460

Electric water guage as standard on the center binnacle Mini. Marked "C-N-H" Genuine Smiths.

$117.27

($84.39 USD †) In stock

Electric temp guage (magnoila) - 13H4460MG

13H4460 MAGNOLIA

Electric water guage as standard on the center binnacle Mini. Marked "C-N-H" Genuine Smiths.

$135.45

($97.47 USD †) In stock

Mini 'smiths' mechanical water temp gauge -52mm - SIB422

SIB422- WATER TEMP MECHANICAL SMITHS GAUGE

0-110 centigrade scale with 6 foot capillary mechanical fittings, this will screw straight into the head on most 998/1100/1275 unless fitting onto a 1275 cooper S (The cooper S head require a TE5 to fit this to the cylinder head transmitter hole as the sender prong will hit the casting in the water jacket)

$177.27

($127.56 USD †) In stock

Mini 'smiths' mechanical water temp gauge -52mm- magnolia - SIB422MG

SIB422MG- WATER TEMP MECHANICAL SMITHS GAUGE- MAGNOLIA

0-110 centigrade scale with 6 foot capillary mechanical fittings, this will screw straight into the head on most 998/1100/1275 unless fitting onto a 1275 cooper S (The cooper S head require a TE5 to fit this to the cylinder head transmitter hole as the sender prong will hit the casting in the water jacket)

$180.91

($130.18 USD †) In stock

Mini 'smiths' dual gauge (oil and water) - SIB130

SIB130- WATER AND OIL DUAL SMITHS GAUGE

Combined water temperature and oil gauge in fahrenheit and 1-100lb oil pressure. this is a mechanical type(capillary fittings) with Smiths name on black face. Will require OA and OL (for oil side)

$200.00

($143.91 USD †) In stock

Mini 'smiths' dual gauge (oil and water)- Magnolia - SIB130MG

SIB130MG- WATER AND OIL DUAL SMITHS GAUGE- MAGNOLIA

Combined water temperature and oil gauge in fahrenheit and 1-100lb oil pressure. this is a mechanical type (capillary fittings) with Smiths name on Magnolia face. Will require OA and OL (for oil side)

$204.55

($147.18 USD †) In stock

Mini temp gauge adaptor (from elect to mechanical when cooper S head is fitted) - TE5

TE5- TEMPERATURE GAUGE ADAPTOR (1275 COOPER S HEAD)

The 1275 Cooper S head has two extra studs, one of those studs is in the thermostat area, when fitting the mechanical gauge the sender prong will hit on this casting in the water jacket. This is a male to female brass spacer/adapter for mechanical water temp guage screws into head & accepts capillary tube.

$15.00

($10.79 USD †) In stock

Mini Temp/AMP/Oil gauge kit (made for a mini) - SIB7999/CP7999

SIB7779- Mini Temp/AMP/Oil gauge kit (made for a mini)

This is a quick 'bolt in kit' that will give you Temp, Oil pressure & Amp's. Whilst it is not smiths or the original part it will work with any mini. Compes complete with mounting brackets, all cables and fittings that are required.

$136.32

($98.09 USD †)

OUT OF STOCK

Electric temp guage (magnoila)- JOHN COOPER - 13H4460MG.JC

13H4460MG.JC- Electric temp guage (magnoila)- JOHN COOPER

Electric water guage as standard on the center binnacle Mini. Marked "C-N-H" Genuine Smiths. JOHN COOPER SIGNATURE

See GTR104 for transmitter to suit.

$177.27

($127.56 USD †) In stock

Temp sensor for Australian cars - GTR104 GTR104/52710- Mini temp sensor This is a temp sensor that will do ALL models, the probe (part that goes into the head) is 9.45mm, there is another one (earlier) that is 8.60mm if you have the smaller one the hole in the head may need to be opened up to suit.	$18.14 $13.59 AUD ($9.78 USD †) In stock
Mini rover temp transmitter, with plastic end (1992-96) - GTR307 GTR307- TRANSMITTER TEMPERATURE WITH PLASTIC END FOR 1992 -96 SPI Fitted to 1275cc cylinder heads from 1992 until 1996 SPI this transmitter is denoted by its large plastic end.	$45.41 AUD ($32.67 USD †) In stock
Mini rover 92on fan switch for radiator - C-ARA4445 Mini 'Rover' Radiator 92on fan switch for 2 or 4 core radiators. The original factory radiators had a seal to hold the switch in but on our special 2 core and 4 core radiators we used this screw in type switch for extra safety. Switching temperatures: On @ 92° and off @ 82°	$45.41 AUD ($32.67 USD †) In stock
Replacement electric fan thermo switch Included in C-ARA4400 - KLM1416 KLM1416- FAN CONTROLLER Replacement thermal transmitter switch for the ELECTRIC fan kit C-ARA4400	$86.36 AUD ($62.14 USD †) In stock
Electric temp guage (smiths) - 13H4460 13H4460 Electric water guage as standard on the center binnacle Mini. Marked "C-N-H" Genuine Smiths.	$117.27 AUD ($84.39 USD †) In stock
Electric temp guage (magnoila) - 13H4460MG 13H4460 MAGNOLIA Electric water guage as standard on the center binnacle Mini. Marked "C-N-H" Genuine Smiths.	$135.45 AUD ($97.47 USD †) In stock
Mini 'smiths' mechanical water temp gauge -52mm - SIB422 SIB422- WATER TEMP MECHANICAL SMITHS GAUGE 0-110 centigrade scale with 6 foot capillary mechanical fittings, this will screw straight into the head on most 998/1100/1275 unless fitting onto a 1275 cooper S (The cooper S head require a TE5 to fit this to the cylinder head transmitter hole as the sender prong will hit the casting in the water jacket)	$177.27 AUD ($127.56 USD †) In stock
Mini 'smiths' mechanical water temp gauge -52mm- magnolia - SIB422MG SIB422MG- WATER TEMP MECHANICAL SMITHS GAUGE- MAGNOLIA 0-110 centigrade scale with 6 foot capillary mechanical fittings, this will screw straight into the head on most 998/1100/1275 unless fitting onto a 1275 cooper S (The cooper S head require a TE5 to fit this to the cylinder head transmitter hole as the sender prong will hit the casting in the water jacket)	$180.91 AUD ($130.18 USD †) In stock
Mini 'smiths' dual gauge (oil and water) - SIB130 SIB130- WATER AND OIL DUAL SMITHS GAUGE Combined water temperature and oil gauge in fahrenheit and 1-100lb oil pressure. this is a mechanical type(capillary fittings) with Smiths name on black face. Will require OA and OL (for oil side)	$200.00 AUD ($143.91 USD †) In stock
Mini 'smiths' dual gauge (oil and water)- Magnolia - SIB130MG SIB130MG- WATER AND OIL DUAL SMITHS GAUGE- MAGNOLIA Combined water temperature and oil gauge in fahrenheit and 1-100lb oil pressure. this is a mechanical type (capillary fittings) with Smiths name on Magnolia face. Will require OA and OL (for oil side)	$204.55 AUD ($147.18 USD †) In stock
Mini temp gauge adaptor (from elect to mechanical when cooper S head is fitted) - TE5 TE5- TEMPERATURE GAUGE ADAPTOR (1275 COOPER S HEAD) The 1275 Cooper S head has two extra studs, one of those studs is in the thermostat area, when fitting the mechanical gauge the sender prong will hit on this casting in the water jacket. This is a male to female brass spacer/adapter for mechanical water temp guage screws into head & accepts capillary tube.	$15.00 AUD ($10.79 USD †) In stock
Mini Temp/AMP/Oil gauge kit (made for a mini) - SIB7999/CP7999 SIB7779- Mini Temp/AMP/Oil gauge kit (made for a mini) This is a quick 'bolt in kit' that will give you Temp, Oil pressure & Amp's. Whilst it is not smiths or the original part it will work with any mini. Compes complete with mounting brackets, all cables and fittings that are required.	$136.32 AUD ($98.09 USD †) OUT OF STOCK
Electric temp guage (magnoila)- JOHN COOPER - 13H4460MG.JC 13H4460MG.JC- Electric temp guage (magnoila)- JOHN COOPER Electric water guage as standard on the center binnacle Mini. Marked "C-N-H" Genuine Smiths. JOHN COOPER SIGNATURE See GTR104 for transmitter to suit.	$177.27 AUD ($127.56 USD †) In stock

Minisport

Product Categories