Minisport

Steering components

Pricing:
Sort by:

MINI & MOKE STEERING RACK NEW UNIT- R/H DRIVE (AUSTRALIAN) - FAM7306

Mini & moke BRAND NEW steering rack- for almost all right hand drive steering, New tooling has resulted in an even stronger rack. These are already filled with grease and do not require oil to be fitted. We also recommend you replace the floor seal (21A30), the outer tie rod ends GSY734MS & Lock nuts (NT608041).

$204.55 $171.82
($133.39 USD ) In stock

MINI & MOKE STEERING RACK NEW UNIT- L/H DRIVE (IMPORTED) - FAM7307

FAM7307- MINI & MOKE STEERING RACK NEW UNIT- LHD

Brand new rack for Mk2 on Left Hand drive cars less track rod end joints,with no neccessity for old rack in exchange.On most of these racks one of the small bolts that holds the pinion cover on sticks out. 

$204.55
($158.79 USD ) In stock

MINI & MOKE QUICKRACK- 2.2 TURN- RHD - C-AJJ1570

C-AJJ1570- STEERING RACK 2.2 TURN QUICKRACK RHD BRAND NEW

If you are interested in performance driving then you know reaction time from the driver to the car is critical; the time it takes to turn the steering wheel to the desired angle is important! The standard rack is 2.7 turns lock to lock, our quick ratio is 2.2 turns!

AFTER 5 years off the market these have just been remade, only a few in stock!

$335.45 $222.73
($172.91 USD ) In stock

MINI SPORTSPACK STEERING RACK- RHD - GSR3386

Mini Right hand drive steering rack for all sportspack models, 1997 onwards. The rack has reduced lock in order to help with clearance of the larger 6x13 sportspack wheels. Very useful when fitting aftermarket 13" wheels that foul bodywork.

$222.73
($172.91 USD ) In stock

MINI & MOKE STEERING RACK TO BODY SEAL (FOAM SEAL) - 21A30

21A30- Mini steering rack to body seal (foam felt)

This seal stops water and noise from entering where the steering rack pinion comes through the body on all models.

$3.59
($2.79 USD ) In stock

MINI & MOKE TIE ROD END LOCK NUT (sold single) - NT608041

NT608041- MINI & MOKE TIE ROD END LOCK NUT (sold single)

This is the half nut that locks up against the tie rod end that stops it from moving (known as a lock nut).

$2.27
($1.76 USD ) In stock

MINI & MOKE TIE ROD END JOINT - GSJ734MS

GSJ734MS- MINI & MOKE TIE ROD END JOINT- NON GENUINE

Non genuine replacement part track rod end for all factory mini steering racks. See also C-AJJ1572 for longer type with more thread or GSJ1106 for genuine type. Sold individually.

$15.86
($12.32 USD ) In stock

MINI & MOKE TIE ROD END JOINT- LONGER TYPE - C-AJJ1572

Extra long for use on a lowered Mini & Moke with negative camber. What these give you is more thread inside the tie rod end, this keeps your suspension A LOT safer when fitting a front end adjustable kit.

$27.23
($21.14 USD ) In stock

MINI & MOKE STEERING WHEEL NUT 1-5/16" - ACH6001

ACH6001- Steering column nut 1-5/16"

This is the column nut as used on all models of minis ever released here. It requires 1-5/16" socket. This nut holds the steering wheel onto your column

$11.77
($9.14 USD ) In stock

MINI & MOKE STEERING WHEEL SHAKE PROOF WASHER - 53K3480

53K3480- Steering wheel shake proof washer

All steering wheels pre air bag (twinpoint injection cars 1997 on) should have this shakeproof washer fitted under the large securing nut. and should be replaced every time the wheel is removed. 

$3.59
($2.79 USD ) In stock

MINI & MOKE STEERING COLUMN SHEAR BOLT - AYG6023

MINI & MOKE STEERING COLUMN SHEAR BOLT

This is the steering column sheer bolt. once tight the head of the bolt will shear off leaving a rounded stub that is very hard to remove.

$13.59
($10.55 USD ) In stock

MINI & MOKE STEERING RACK PINION LOAD WASHER- ORIGINAL RACKS ONLY - CCA45

CCA45- MINI & MOKE STEERING RACK PINION LOAD WASHER- ORIGINAL RACKS ONLY

This is a steering rack pinion wave washer, there are two of these that hold a preset tension against your pinion (load) if one of these are broken it can make the steering a bit loose.

$6.00
($4.66 USD ) In stock

MINI & MOKE STEERING ARM BOLT - 2A4315

2A4315- Mini steering arm bolt- sold single

There are 2 of these bolts per arm and the locating rings for them in the hub are FAM6924 and the locktab are 2K5377 and all of these parts were standard fitment on every mini produced. Torque setting 30 to 35 lb/ft

$8.00
($6.21 USD ) In stock

MINI & MOKE STEERING ARM DOWEL - FAM6924

These are the dowels that fits in the front hub to locate the steering arms. There are two dowels per hub- 2 hubs per car (4 needed in total). Bolts for these are 2A4315 and the locktabs are 2K5377

$7.23
($5.61 USD ) In stock

MINI & MOKE STEERING ARM- R/H - BTA894

BTA894RH- STEERING ARM R/H MK II "S" upgrade on Mk2 on

Upgraded thicker steering arm as fitted to Cooper S MK2/3 and 1275GT. The Mini MK2 Steering arms were designed to be used with the later model rack that has a tighter turning ratio than the early MK1 rack. The angle of these arms is slightly different thus allowing the tie rod end to have a little more range of adjustment into the rack. These can be used on any mini from 1967 MK2 on as an upgrade but should be used in pairs

$54.50
($42.31 USD )

OUT OF STOCK- UNABLE TO BUY NEW.